Overhaul Manual 
3.5/3.9 & 4.2 litre
V8 ENGINE 
                                            

                                                    ENGINE
OVERHAUL65
Crankshaft rear oil seal - refit
1.Ensure that oil seal running surface on
crankshaft and oil seal housing mating surface
on cylinder block are clean and oil free and that
bolt holes in cylinder block are clean and dry.
2.Screw 2 slave guide studs into cylinder block.
3.Position new gasket to cylinder block ensuring
that groove along bottom edge of gasket is
towards block.
NOTE: O ring fitted to early engines is no
longer required.4.Slide oil seal protector sleeve over crankshaft,
fit...