T3 Prox Keypad Programming – Cheat Sheet 
 
Factory Code = 123456 
1.  Enter Program Mode(wait for Green light, before pressing AL button) 
1 2 3 4 5 6  AL 
 
All programming functions are performed while the lock is in program mode. 
 
2.  Change Factory Code to New Master Code  (Must be 6 digits) 
AL 1 AL  
AL  
* 
(Enter Master Code)                          (Re Enter Master Code) 
3.  Enter Date  
AL 38 AL  
* 
     (Enter Month Day Year- Use  MMDDYY) 
4.  Enter Time   
AL 39 AL  
*...
                                            

                                                    NEW FEATURE 
ONE TIME ACCESS FOR 
GROUP 3 USERS 
ADDENDUM 
 
 
 
 
 
 
OVERVIEW 
Your T3e Series lock now includes a new feature named One Time Access for 
Group 3 Users, allowing the creation of multiple one time only User Codes.  
When this feature is activated, an entry by a Group 3 User will allow entry only 
once, then the user will become disabled.  
Note:  When the User Code is entered 
for the first time and access is granted, the Event Log will read Entry followed by 
User Disabled.  If the User...
                                            

                                                    1  
OVERVIEW 
When using a USB adapter and DL-Windows, it is possible 
that DL-Windows may not find the adapter due to the USB 
adapter being assigned a COM Port greater then COM4.  To 
change this number, please use the following instructions. 
 
Note:  Although the images that follow were obtained from a 
Windows 98 installation, the procedure is nearly identical with 
Windows 2000, Windows ME and Windows XP installations.   
 
CONFIGURE THE USB PORT 
Click Start > Settings > Control Panel to open the...