Home > Accusplit > Pedometer > Accusplit Pedometer AE1020 User Manual

Accusplit Pedometer AE1020 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Accusplit Pedometer AE1020 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 150 Accusplit manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							WEARING YOUR PEDOMETER
    While gently holding the belt clip open, slide the pedometer 
    onto your belt or the top edge of your pants or skirt. It should fit 
    snugly and level, above one knee. 
    Note:  The pedometer should be as vertical as possible.  Walkers 
    with larger stomachs may find it helpful to wear the pedometer 
    farther back on the bod y, toward one hip. 
    T o avoid losing or dropping your pedomete r, use the included 
    leash and clip to fasten the pedometer securely to your clothing. 
    Attac hing the Leash:  Attach the pedometer to the leash by 
    looping the leash around the pedometer belt clip. Next, clasp 
    the waist-band of your clothing with the attached clip.  Y ou can 
    also use a safety pin to fasten the leash to your clothing, loop 
    the leash through your belt or belt loop or use a badge holder . 
    OPERATING INSTRUCTIONS
    ACCUSPLIT , Inc.  •  3090 Independence Drive, Suite 148  •  Livermore, CA 94551 USA
    800-935-1996  •  925-290-1900  •  FAX 925-290-1930  • www.ACCUSPLIT .com  •  support@ACCUSPLIT .com
    ACCUSPLIT®
           EAGLE
    ™ 10 20
     
    Congratulations on taking the first step to wellness with your purchase of an 
    ACCUSPLIT  pedometer. It’s easy to set up your new pedometer . 
    Just follow the steps belo w, and start walking!
    RESETTING  YOUR PEDOMETER
    Most people prefer to reset step counts dail y.  To reset:   
    Press RESET  button to reset to zero. 
    REPLA CING THE B ATTER Y
    When the display starts to dim or goes blank, it is time to 
    replace the batter y.  Y our pedometer uses one  T ype L1 142 
    (LR43) 1.5 volt silver oxide batter y.  To replace:  
    1.  Using a jeweler’s screwdriver or fingernail, gently pry   
      battery cover from case, using slot at top of cover . 
    2.  Pul l t he ol d b atter y ge ntly  o ut of it s  hold er.  Repla ce  it with   
      a new batter y.  The battery’s positive (+) terminal should be   
      FACE UP  while you put it into the pedomete r.
    3.  Slide bottom of battery cover back into place, then snap   
      top of cover back into place.
    ACCUSPLIT
    EAGLE 1020
    S
    TE PS
    RESET
    VIEWING  YOUR RESUL TS
    Once you put on your pedomete r, it will automatically 
    begin to record your steps. 
    First,  loop the 
    pedomet er clip
    Next,  loop the metal 
    clip,  then clasp clothing
    Or, loop a   
    badg e holder , then  
     put int o pocket
    (Badge holder   
    not included)Or , loop a belt or belt loop
    NO-PR OOF-OF-PUR CHASE LIMITED  WARRANT Y 
     See label on back of unit for details, or check http://support.ACCUSPLIT.com
    REGISTER NOW Please return 
    your AE1020 Registration to the 
    Repair Center address in the 
    warranty , and we will let you 
    know about future products.  Email (preferred)
    User
    970-060 
    						
    All Accusplit manuals Comments (0)

    Related Manuals for Accusplit Pedometer AE1020 User Manual