Home > Acoustic Energy > Loudspeaker > Acoustic Energy Loudspeaker Compact 1 User Manual

Acoustic Energy Loudspeaker Compact 1 User Manual

Here you can view all the pages of manual Acoustic Energy Loudspeaker Compact 1 User Manual. The Acoustic Energy manuals for Loudspeaker are available online for free. You can easily download all the documents as PDF.

Page 1

COMPACT-1
www.acoustic-energy.co.uk
OWNERS MANUAL 

Page 2


Page 3

Introduction
Congratulations on choosing the Acoustic Energy Compact 1 - a
high-power, ultra-compact two-way loudspeaker capable of 
outstanding audio performance.
With its neutral character, exceptional power handling and low
distortion, the Compact 1 is suitable for many rooms and systems alike.
Flexible with positioning, the Compact 1 speakers are happy to be
installed on dedicated stands, wall mounted (with supplied bracket) or
placed on a shelf or unit.
Finished in real-wood veneer or high gloss...

Page 4

Positioning
The Compact 1’s are very fexible with regard to positioning and are
designed to work well wherever they are located within the listening
environment. There are however some basic guidelines that should
be followed (where possible) for optimum performance:
The tweeters (high frequency drivers) should ideally be at ear level
when the listener is seated and for serious listening the grilles are
best removed where practical.
Rigid support is necessary for the speakers to deliver optium dynamic...

Page 5

-+
Connection
Check that your amplifer is switched of before installing your 
loudspeakers. Failure to do so may result in speaker or amplifer
damage. 
The positive cable from the amplifer positive (or red) terminal should
connect with the positive (red) terminal on the loudspeaker. Similarly
the negative cable should connect the amplifer negative terminal
(black) to the negative terminal (black) on the loudspeaker.
After wiring up, lower the volume to the minimum, switch on the
amplifer, select the...

Page 6

Specifcations
Tweeter:   28mm Fabric Dome
Mid/Bass Driver:  100mm Paper Cone
Power Handling:  100 Watts RMS (continuous undistorted input)
Frq Response:  65Hz-28kHz (+/- 3dB)
Sensitivity:  88 dB/W
Impedance:  8 ohm (6 ohm minimum)
Cabinet:    Multiple brace, pressure loaded 18mm MDF
    with rear-fring low turbulence refex port
Weight:    3.2kg per speaker
Dimensions:  220 x 150 x 200mm (H/W/D)
Finish:    High gloss piano black or Vermont walnut vinyl 

Page 7

Warranty
Your Acoustic Energy Compact 1 loudspeakers are guaranteed against original
defects in materials, manufacture and workmanship for 3 years from the date
of Purchase. Please retain all original packaging materials for possible future
use.
We suggest that you complete the details of purchase now and keep this
information in a safe place for future reference.
Under this warranty Acoustic Energy agrees to repair any defect or, at the
company’s discretion, replace the faulty component(s) without...

Page 8

www.acoustic-energy.co.uk
ACOUSTIC ENERGY LTD16 Bridge Road,Cirencester,
Gloucestershire, GL7 1NJ
Tel: +44(0) 1285 654432
Fax: +44(0) 1285 654430
Email: [email protected] 
Start reading Acoustic Energy Loudspeaker Compact 1 User Manual

Related Manuals for Acoustic Energy Loudspeaker Compact 1 User Manual

All Acoustic Energy manuals