Adam Equipment CBD Bench Counting Scales CBDREVBAE2 User Manual

 
© Adam Equipment Company 2011  Page  
19 
 
6.4  PLU  (Product Look Up) 
 
Product  Look-Up  (PLU)  numbers  are  used  to  store  inf ormation  about  the 
commonly  used  items.  The  Tare  Weight,  Description  o f  the  product  and  Unit 
Weights  for  a  particular  item  are  recalled  by  enter ing  the  PLU  number  for 
ease of operation.    
The  scale  is  capable  of  storing  values  for  the  Tare   weight,  Description  and 
Unit Weight for a maximum of up to 100 PLU numbers.    
 
Tare...

 
© Adam Equipment Company 2011  Page  
20 
 
Please find below an example for setting up “ PLU 27” with Description as “ M4 
Nut ” and Unit weight of “ 0.015”. 
 
 
DISPLAYS ACTIONS  
Weight Unit weight Count 
REMARKS 
 
Press [PLU] 
 
“PLU  ” “    - -“                    “         “ - 
Press [2], [7] 
  “PLU  ”        “    27”               “         “  - 
Press 
[Pst] 
“PLU 27”     “x x x x x x”         “x  x x ”  The current  
description will be 
shown with the first 
character flashing. 
The...

 
© Adam Equipment Company 2011  Page  
21 
 
6.4.2  ENTERING DESCRIPTION MANUALLY 
 
The  description  can  be  up  to  12  characters  long  and   can  be  a  mix  of 
numbers, symbols or letters.   
 
During the procedure to set the description the num eric keypad will work in a 
similar  way  to  a  mobile  telephone.    Pressing  a  numb er  briefly  will  show  the 
number and holding it down will scroll through all  the characters.  
  
The numbers and characters are:   1 - / \...

 
© Adam Equipment Company 2011  Page  
22 
 
6.4.3  RECALLING PLU’S MANUALLY   
·  To  recall  the  PLU  values  the  user  should  first  sel ect  either  local  or 
remote  scale  as  the  tare  value  stored  will  be  speci fic  to  the  scale 
selected. 
  ·   Then  press  the  [PLU]  key,  enter  the  PLU  number  (00  – 99) then press 
the  [PLU]  key again to recall the data. 
 
·  The  display  will  show  the  results  of  the  recall  fo r  1  second  then  return 
to weighing with the data...

 
© Adam Equipment Company 2011  Page  
23 
 
·   If  a  PLU  number  is  recalled  that  does  not  have  any   information  stored 
against  it,  the  scale  will  continue  to  work  with  Ta re  and  Unit  weight 
unchanged. 
  
NOTE: PLU’s can be stored and recalled using RS-232  Interface (see 
section 9.1 and 9.2 of this user Manual).
 
  

 
© Adam Equipment Company 2011  Page  
24 
 
 
7.0  PARAMETERS 
  
The  following  parameters  set  up  the  scale  as  requir ed  by  the  user.      For  the 
Technical  parameters  and  configuring  the  remote  pla tform  refer  to  Section 
12.   
Enter  the  User  Parameters  section  by  pressing  the  [Pst]  key  during  the  self-
test  when  the  power  is  turned  on  or  press  and  hold  the [Pst]   key  for  3 
seconds  during  normal  operation.      This  will  allow  the  user  to  set...

 
© Adam Equipment Company 2011  Page  
25 
 
 
“UnI t”  ” KG/ Lb”       
kg/ lb both are enabled
 
”UnI t”   “KiLo”  kg only is enabled            
                         
            
 
  
 Un I t   
”UnI t”    “Lb”  lb only is enabled
 
  
 
Print  Au  oFF 
  
  
  
 Prints only when 
the Auto- 
Accumulation is 
set to off. 
Au on
  
    
    
    
  Prints only when 
the Auto-
Accumulation is 
set to on.
 
P Cont  Sets  the  RS-232  interface  
to  print  continuously  and 
the  accumulation...

 
© Adam Equipment Company 2011  Page  
26 
 
     
7.1  REAL TIME CLOCK 
 
The  Real  Time  Clock  (RTC)  is  used only for the RS-2
32 output. See Section 
9.   The Date and Time can be set as required.  The  scale will keep the clock 
running even when the power is off.    
Setting up the clock  
·  Press  the  [CE]  key  when  the  display  is  counting  down  after  power  is  
turned on.  The initial displays show the current d ate and time.   
 
“ rtC        “  “ 11,14,06 ”  “16,41,35 ” 
 
·...

 
© Adam Equipment Company 2011  Page  
27 
 
 
8.0  BATTERY OPERATION 
 
·   The  scales  can  be  operated  from  the  battery.  The  b attery  life  is 
approximately  70  hours  if  only  the  basic  unit  is  us ed  and  the 
backlight  is  not  used.    If  the  backlight  and  a  seco nd  platform  is 
used the battery life will be reduced. 
 
·  When the battery needs charging the arrow above th e low battery 
symbol under the “ Weight” display will turn on. The battery should 
be  charged  as...

 
© Adam Equipment Company 2011  Page  
28 
 
    
9.0  RS-232 OUTPUT 
  
Specifications:
 
        
   
RS-232 Connector style:  
 
        
  
USB Connector style:  
 
     
 
Software drivers for allowing a PC to operate with  the USB interface is available for the 
Adam Equipment web site.  
The RS-232 and USB  interfaces are the same for inp ut and output.   
  
RS-232 output of weighing, data default settings  
ASCII code 
4800 Baud (600-9600 selectable) 
8 data bits (8 data bits no parity, 7 data...