Addonics Technologies CF DigiAdapter adcfpcmcia User Manual

							 
ADDONICS TECHNOLOGIES 
Model: AD2CFEXC34 
 
Installation Guide 
 
 
 
       
 
 
Recommendations on using the AD2CFEXC34 
 
Install the JMB36X RAID Configurer in Windows to create raid 
volumes. The JMB36X RAID Configurer will not run when no 
devices are attached to the controller. 
 
Supports the following configuration settings  
 RAID 1 (Mirrored)  
 BigDrive (JBOD)  
 individual drive mode  
 
 
1. JMB36X RAID Configurer Installation 
 
Note:   To create raid volumes and monitor the status of your 
raid set, you need to install the JMB36X RAID 
Configurer. Install the utility from the CD that came with 
your package. 
 
a.  Turn computer ON.  Insert Driver Disk into CDROM. 
b.  The Addonics Technologies Driver Disk window pops 
up. 
c.  Select Browse CD. Click Driver Download under 
ExpressCard / CardBus Adapters. Select  
AD2CFEXC34. Extract the files into your system. 
d.  Install JMB36X RAID Configurer by clicking the 
Setup.exe.  Follow the instructions. 
e.  After software installation, reboot the system. 
 
2.  Insert the CF cards into the CF card slots of the 
AD2CFEXC34. 
 
3.  In Windows, to open the JMB36X RAID Configurer, click on 
the system tray the JMicron Icon. 
 
 
 
 
 
 
 
 
 
 
  
 
 
 
 
4.  This will open up the JMB36X RAID Configurer. 
 
 
 
 
 
     
 
 
5.  Click on the icon to open the wizard for each function. 
 
 
To Verify Driver Installation 
 
1. Right click My Computer and click Manage. 
2. Select Device Manager. 
3. Look for the following: 
Windows® 2000/XP/2003:  
Double click SCSI and RAID Controller: 
-JMicron JMB36X Controller should be displayed 
Windows® Vista: Double click Storage controllers: 
-JMicron JMB36X Controller should be displayed 
 
 
 
 
 
 
 
 
 
 
 
 
 
TECHNICAL SUPPORT 
 
Email:   http://www.addonics.com/sales/query/ 
Internet:   http://www.addonics.com 
 
Technical Support (8:30 am to 6:00 pm PST) 
Phone:      408 453-6212 
Email: http://www.addonics.com/support/query/ 
Power & 
drive activity 
LED  CF slot 2 (CF2) 
/ Slave 
Create 
RAID Create 
RAID from 
Existing Disk Show  
Disk Rebuild 
RAID Remove 
RAID 
CF slot 1 (CF1) / 
Master