Air Oasis AHPCO45 Cell Replacement Instructions User Manual
Have a look at the manual Air Oasis AHPCO45 Cell Replacement Instructions User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 34 Air Oasis manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NOTE: Before you begin please unplug the unit from its power source. 3401 Airway Blvd. Amarillo, Texas 79118 806-373-7788 [email protected] Cell Replacement Instructions Required Tools: 1. Phillips head Screwdriver or drill with phillips head bit. 1. Remove the screw on the sides of the brushed aluminum shell then remove the shell from the base of the unit. 2. Pull AHPCO arms out away from the black socket head screws. 3. Pull AHPCO up and of of the machine. 4. Push the new AHPCO cell into place, ensuring the four pins are aligned with the connector. The lamp should plug into the connector as the holes in the bracket snap over the socket head screws. NOTE: If the lamp is not fully seated on the connector after you have installed the new AHPCO cell, press down frmly on the lamp until the lamp and connector are touching. 5. Replace the shell and secure the with screws.