Alpha Tool.Com.HK Limited Ecoguard Type C User Manual

11
flexible Connector Hose* (*sold separately)Stainless Steel Hose band
Rubber Hose adapter
aTTaCHING THE bOTTOM Pla TE TO THE fOOT PlaTE
1.  Remove protective tape to expose adhesive side on the bottom Plate.
2.  align holes with holes on foot plate
3.  Press firmly to securely attach
(fig.14)
bottom Plate
foot Plate
  a TT aCHING THE DuST COllECTOR
attach the Dust Collection Cover to a hose. (fig. 10)
*The hose opening of the Dust Collection Cover has an outside diameter 
of 34mm. 
If necessary, use...

12
foot Plate
Screw
bottom Plate
Knob bolt
aTTaCHING THE DuST COllECTION COVER TO THE fOOT Pla TE
1.  attach the diamond blade to the grinder before installing the foot plate.\
2.  loosen the Knob bolt.
(fig.15)  

13
Guide bar
3. align the foot plate with the holes on the dust collection cover.   at-
tach with the supplied screws.
4.  Tighten the Knob bolt.
 CuTTING  aPPlICaTION uSING THE fOOT Pla TE
1.  for stable operation, it is recommended to use the foot plate.
2.  for straight cutting, run the foot plate parallel to the guide bars, as 
shown in figure 13.
(fig.16)
(fig.17)  

14
   alPHa® ECOGuaRD TyPE C SCHEMa TIC
®
® ®
®
®
®   

15
   alPHa® ECOGuaRD TyPE C P aRTS lIST
DRaWING NO. PaRT NO. DESCRIPTION QuaNTITy
1 500043Cover assembly 1
2 500044base 1
3 500045base Plate 1
4a 500002Connector assembly (alpha
® / Makita®/ 
Milwaukee) 1
4b 500003Connector assembly (Hitachi) 1
4c 500004Connector assembly (Metabo
® / bosch) 1
5 500005Hose adapter 1
6 500006Stainless Steel Hose band 1
7 500046base flange (5/8”-11) 1
8 -lock Nut (Original) -
9a 500047Spacer-T4.0 (alpha
® / bosch) 1
9b 500012Spacer-T5.0 (Makita
® / Milwaukee) 1
9c...

Copyright © 2013 Alpha Professional Tools. All rights reserved. 
103 Bauer Drive, Oakland, NJ 07436 • 800-648-7229 • Fax: 800-286-01 14
www.alpha-tools.com
12/2013