Home > AMT Datasouth > Printer > AMT Datasouth Printer CodeWriter 5106 Users Manual

AMT Datasouth Printer CodeWriter 5106 Users Manual

Here you can view all the pages of manual AMT Datasouth Printer CodeWriter 5106 Users Manual. The AMT Datasouth manuals for Printer are available online for free. You can easily download all the documents as PDF.

Page 31

23 NAME
Media Gap (Label Gap)
Black Line
Ribbon
Presentation (Strip)
Head-UpADJUSTMENT PROCEDURE (Message on Display)
By volume B in media compartment.
 Sensitivity range (1st
).
With Gap, 70% or more.
With media (label), 35% or less
SEE ABOVE NOTE BEFORE MAKING ADJUSTMENT
By volume B in the media compartment.
Sensitivity range (2nd
)
When black paper or color except black, 70% or more
When black line, 35% or less
By VR1 on TPB-2170
Sensitivity range (Rib)
With no ribbon, 70% or more
With ribbon, 25% or...

Page 32

24 9.0ELECTRICAL CIRCUITRY 

Page 33

25 10.0EXTERNAL CONNECTOR AND PIN ASSIGNMENTS
Pin Assignments of RS232 Interface:
Pin No.SignalPin No.Signal1N/C6DSR2RXD7RTS3TXD8N/C4DTR9N/C5GNDPin Assignments of Centronics Parallel Interface:
Pin No.SignalPin No.SignalPin No.Signal1STROBE6DATA 511BUSY2DATA 17DATA 612PE3DATA 28DATA 713SEL4DATA 39DATA 814-17N/C5DATA 410AKNLG18-30GND 

Page 34

26 11.0VOLTAGE CHECK AND ADJUSTMENT
Check TerminalSwitch Setting and
Typ. VoltageUsage and Adjusted ByV1W           H:20.0 +/- 0.5
               L: 18.0 +/- 0.5For Take-Up Motor
By VR1 on Motor Control
Board (TPB-2177)V2R            H: 20.0 +/- 0.5
               L: 17.6 +/- 0.5For Ribbon Motor
By VR2 on Motor Control
Board (TPB-2177)NOTES:
W switch for Take-Up Motor has to be set to ‘H’ side whenever Presentation Mode is
selected.  In other modes, W switch should be set to ‘L’ side.
R switch for Ribbon...

Page 35

27 12.0MAIN PCB BOARD
Check
TerminalTyp.
 VoltageUsage and
Adjusted ByVcc
+ 5.0For logic circuit
No adjustment volumeV-- 12.0For RS-232 interface
No adjustment volumeV++ 12.5For RS-232 interface
No adjustment volumeV
TH+ 24.0For Thermal Head, DC motor and ribbon
solenoid
RV1 on switching power supply unit
(PTR637-30)V
SP+ 36.0For Stepping Motor
RV1 on switching power supply unit
(PTR637-30)NOTE:
Check the voltage of V
SP and V
TH before you adjust the voltages by RV1.  RV1 adjusts
both voltages...

Page 36

28 13.0TAKE-UP MOTOR CONNECTORS
                                     Connector                                                   Result
         Motor Side                                   Main Board
             White                                             Blue                                    Clockwide
               Red                                              Red
             White                                            Red                                    Counter Clockwide...
Start reading AMT Datasouth Printer CodeWriter 5106 Users Manual

Related Manuals for AMT Datasouth Printer CodeWriter 5106 Users Manual

All AMT Datasouth manuals