AOC Le24h067 User Manual

							30
2Press ◄/► to adjust Auto or Manual setting for Time Mode and press OK.
3
Press ▲/▼ to select “Time Zone”. Press ◄/► to adjust Time Zone which you located and press OK.
4
Press ▲/▼ to select “Daylight Savings”. Press ◄/► to on/off Daylight Savings and press OK.
5
For manually Time Mode setting, press ▲/▼ to select “Year”, “Month”, “Day”, and “Time”. Press ◄/► to adjust 
“Year”, “Month”, “Day”, and “Time”, and press OK.
6
MU
/ ExitENPress MENU/EXIT again to exit.
Password Setting:  3. 
Change the 4-numeral parental control password. Three steps are required for changing the password: 
Step 1: 
PR
Press Number Key to enter the old password.Enter Old Password
Step 2: 
PR
Press Number Key to enter the New password.Enter New Password
Step 3: 
PR
Press Number Key to enter the New password.Confirm New Password
Note: This item is only available in TV, Composite and S-Video source modes. The default password is [0 0 0 0].
 
						

							31
Parental Control:  4. 
 
OKMENU
/Exit
FEATURE Parental Control
Move Select Return Exit
Button Lock
Block Unrated TV
USA Parental Locks
Open V-Chip Canadian Parental LocksOff
Off
Provide the Parental Control (V-chip) function setting. Before entering the Parental Control sub-menu, user has to key in the password first. 
Enter the Parental Lock item, then the user can modify the restricted table about MPAA or TV Rating respectively. While exiting the sub-menu, 
the parental control function is working. The inhibitive channels or source signals can be unlock through pressing the V-CHIP key on the remote 
control and then key in the correct password. 
Note: This feature is only available in TV, Composite and S-Video source modes. (The default password is: 0 0 0 0.)
Parental Control: Description
Button LockSelect On or Off to lock or unlock the control buttons on the side panel of the TV. When this function enables, the 
control buttons on your TV will be locked and TV will be controlled by remote control only.
Block Unrated TV When Block Unrated TV is set to on, your TV will block unrated program.
USA Parental Locks Set the parental control level by MPAA or TV Rating.
Canadian Parental Locks Set the parental control level by English Rating or French Rating.
Open V-ChipOpen V-Chip is an advanced V-Chip rating system for digital channels that are received. The rating table will be 
updated by downloading the RRT5 data for blocking.
Closed Captions 5. : Select a closed caption option. (Off / On / With Mute)
Analog Captions:  6. Select an analog caption option. (CC 1-4 / TEXT 1-4)
Digital Captions:  7. Select a digital caption option. (Service 1-6)
Digital Captions Setup: 8.   Provide numerous options for setting the digital closed caption style in the sub-menu. 
Items Description
StyleSet to Automatic or Customer mode. If Custom mode is selected, user can modify the detail styles described 
below. The setting result will be shown immediately on the bottom of the submenu OSD.
Note: This feature is only available in Digital TV (ATSC) mode.
Size Digital closed caption font size, which can be set as Automatic, Small, Normal, or Large.
Font Digital closed caption font style, which can be chosen as Automatic, Default, or Font 1 ~ 7.
Text Color Automatic / White / Red / Green / Blue / Yellow / Magenta / Cyan / Black.
Text Opacity Automatic / Solid / Flashing / Transparent / Translucent.
Background Color Automatic / Black / White/ Red / Green / Blue / Yellow / Magenta / Cyan.
Background Opacity Automatic / Solid / Flashing / Transparent / Translucent.
Edge Effect Automatic / None / Raised / Depressed / Uniform / Left Shadow / Right Shadow.
Edge Color Automatic / Red / Green / Blue / Yellow / Magenta / Cyan / Black / White.
 
						

							32
HDMI CEC: 9.   Set the HDMI Control to ON and this feature will enable the HDMI CEC function and your AOC HDTV will discover and 
communicate automatically with other compatible HDMI interfaced devices. Select ODD to disable this option.
 
OKMENU
/Exit
FEATURE HDMI CEC
Move Select Return Exit
HDMI Control
Device Auto Off
TV Auto On
Device List Root MenuOn
Off
Off
1MU
/ ExitENPress MENU/EXIT to call out MENU.
2
Press ▲/▼ to select “Setup” , and press OK.
3
Press ▲/▼ to select Setting item: HDMI Control and press OK to enter.
4
Press ▲/▼ to select Setting item: HDMI Control, Device Auto Off, TV Auto On, Device Menu Control, Device 
List, etc. and press OK to enter.
5
Press ◄/► to adjust.
6
MU
/ ExitENPress MENU/EXIT  again to exit.
Items Description
HDMI Control Enable or Disable HDMI Control.
Device Auto OffEnable of Disable Device Auto Off.
When you turn off the TV, all active CEC enabled devices on the HDMI inputs will go to Standby.
TV Auto OnEnable or Disable TV Auto On
Pressing the “Play” button on the CEC enabled device will commend the device to play, turn the TV on and the 
HDMI input, that the device is connected to, will become the active input source for the TV.
Root Menu Accesses the menu of connected HDMI CEC-compatible device with your TV remote control.
Device List List the device which enabled the HDMI CEC function.
Note: Not all devices with an HDMI connection have the CEC feature.  Consult the instruction manuals for the device you are trying to control to 
confirm whether or not CEC is available.
Input Labels: 10.   User can edit the input labels.
Component Setting: 11.   This option only shows and is available in component mode, which provides fine tuning component display.
[Phase] – Adjust Picture Phase to reduce Horizontal-Line noise. The tuning range is from 0 to 100.
[Preset] – Restore the default component setting values. 
MultiMedia Menu:  12.  This option shows the settings for the photo play function from USB storage device. 
Note: 
a. File number is limited to 1000 files 
b. This model is only supported JPEG format. 
c. JPEG sizes are limited up to 15360 x 8640.
Reset to Default: 13.   Restore all the default settings.
 
						

							33
JPEG Viewer
After plugging USB storage device into USB port, Multimedia List menu will display, or press “Photo” on the remote control after you plugging 
USB storage device.
Image Delay Normal
Start Slide Show
Rotate Photo
Back To Upper Folder
Back To Root Folder
Exit
     
Filename \..Filename
Filename FilenameFilename
1Press OK to enter JPEG Viewer.
2
Press ▲/▼/◄/►to select, and press OK to enlarge the selected photo (orange frame) browser.
3
MU
/ ExitENPress MENU/EXIT to display control menu.
Multimedia List
1. JPEG Viewer
Exit
JPEG Viewer Control: Description
Image DelaySet display time for each picture in slide show. There are three options: Fast, Slow, and Normal.
Start Slide ShowEnter Slide Show mode.
Rotate PhotoRotate selected picture. (0/90/180/270).
Back to Upper FolderReturn to the upper folder.
Back to Root FolderReturn to root folder.
Back To BrowserReturn to Browser mode. (Photo page with control menu.)
ExitExit JPEG Viewer and return to original source. (Browser with Control menu.)
 
						

							34
Troubleshooting 
Condition Explanation / Solution
No picture
No picture Check the Power Saving settings. 
Cannot receive any channelsMake sure the power cord is connected securely. Turn on the power of the TV. 
Check antenna/cable connections. Make sure the Cable setting is correct for your TV signal source. 
TV is locked to one channel Perform Auto Program to add receivable channels that are not present in the TV’s memory.
Cannot receive or selectPerform Auto Program to add receivable channels that are not present in the channels TV’s memory. 
To receive or select cable channels, make sure that Cable in the Channel settings is set to On. To 
receive or select UHF channels over an antenna, make sure Cable is set to Off. 
The TV turns offCheck if Sleep Timer is activated, or confirm the Duration setting of Timer automatically.
Check PC Power Management in General Settings.
No picture from some videoCheck the connection between the optional video equipment and the TV Sources. 
Press INPUT on the remote control.
Select your desired input from the External Inputs list.
Poor picture
The quality of the images is not 
as good as what I saw at the 
storePicture quality depends on the signal content. See Quick Setup Guide (supplied) to display the best 
possible picture for that signal. 
Double images or ghostsCheck antenna/cable connections.
Check the antenna location and direction. 
Only snow and noise appear on 
the screenCheck if the antenna is broken or bent; Check if the antenna has reached the end of its serviceable life. 
(3-5 years in normal use, 1-2 years at the seaside.)
Dotted lines or stripesKeep the TV away from noise sources such as cars, motorcycles, or hair-dryers.
If using 300 ohm twin lead, move the excess lead away from the TV or try using 75 ohm coaxial cable 
instead.
No color/Dark picture/Color is not 
correct/The picture is too brightPress PICTURE to select the desired Picture Mode; Adjust the Picture Mode options in the Picture 
settings.
Noisy pictureMake sure that the antenna is connected using a 75-ohm coaxial cable. 
Keep the antenna cable away from other connecting cords. 
To avoid TV interference, make sure to use an undamaged antenna cable.
No sound/Noisy sound
Good picture, no soundCheck the volume control. Press MUTE or VOL + so that 
disappears from the screen.
Disconnect your headphones. 
For HDMI equipment, confirm that the audio output setting of the connected equipment is set to PCM. 
This TV's HDMI inputs support PCM 32, 44.1 and 48 kHz, 16, 20 and 24bits.
Audio noiseMake sure that the antenna is connected using a 75-ohm coaxial cable. 
Keep the antenna cable away from other connecting cords. 
To avoid TV interference, make sure to use an undamaged antenna cable.
PC Input
No Picture / No SignalConfirm the PC is correctly connected to the TV with either the PC IN (with an HD15 cable) or with the HDMI IN. 
Ensure the output signal from the PC is one of the formats listed on page 18. 
Turn the PC off. Confirm the PC connection and restart the PC. Plug and play will auto-detect the TV 
and correctly set up PC timing. 
Verify PC Power Management is activated.
Poor Picture Adjust the resolution. Adjust Pitch and Phase.
Wide Mode changes 
automaticallyThe current Wide Mode setting is automatically replaced with the 4:3 
Default setting when you change the channel or video input, if 4:3 Default in the Screen settings is set 
to other than Off. If you want to lock in Wide Mode selected with WIDE on the remote control, set 4:3 
Default to Off in the Screen settings.
Check the Auto Wide option in the Screen settings.
Suddenly the picture gets smallerThe picture gets smaller during the commercials, this is due to the method the provider broadcasts their 
contents. When HD content channels switch to SD definition content (commercials), the picture may be 
small with a black border.
“Black box” on screen You have selected a text option and no text is available. To turn off this feature, set the CC Display 
option to Off. If you were trying to select closed captioning, select CC1 instead of Text1-4. 
Black bands appear at the edges 
of the screen Some wide screen programs are filmed in aspect ratios that are greater than 16:9 (this is especially 
common with theatrical releases). Your TV will show these programs with black bands at the top and 
bottom of the screen. For more details, check the documentation that came with your DVD (or contact 
your program provider). Programs in 4:3 aspect ratio will have bands on left and right sides of the 
screen.
Condition Explanation / Solution
PC Input
Certain programs on DVD or 
other digital sources display a 
loss of detail, especially during 
fast-motion or dark scenes This is due to the digital compression of the source content used by certain digital broadcasts and 
DVDs which may cause your TV’s screen to display less detail than usual, or cause artifacts (small 
blocks or dots, pixilation) to appear on your screen. These signal compressions are more visible and are 
dependent on the clarity and resolution of the television. 
Remote control does not operateCheck the polarity of the batteries or replace the batteries. 
Point the remote control at the remote control sensor located at the front of the TV. 
Fluorescent lamps can interfere with your remote control operation; try turning off the fluorescent lamps. 
Keep the remote control sensor area clear from obstacles.
 
						

							35
Dimensions & Specifications 
Model LE22H067 / LE24H067
Panel sizeLE22H067: 546 mm diagonal (21.5” viewable)
LE24H067: 598 mm diagonal (23.5” viewable)
Resolution  1920 x 1080
TV System NTSC standard
ATSC standard (8-VSB, Clear-QAM)
Channel coverageVHF: 2 through 13
UHF: 14 through 69
Cable TV:
Mild band (A - 8 through A - 1, A through I)
Super band (J through W)
Hyper band (AA through ZZ, AAA, BBB)
Ultra band (65 through 94, 100 through 125)
Speaker3 W x 2
Antenna impedance 75Ω
Power source 120V
 60Hz, 150W
Standby power consumption
						

							36
Index
A
Adaptive Contrast, 26
Antenna, 6, 35
Aspect Ratio, 26
Audio, 25, 27, 34
Audio Language, 27
Audio Setting, 25, 27
Audio Source, 27
Auto Adjust, 28
Auto Search, 23
AVL, 27
B
BACK, 11
Backlight, 26
Balance, 27
Bass, 27
B/L control, 29
Brightness, 26
C
Channel, 23, 24, 34
Clock, 28
Closed Captions, 29, 31
Color, 26, 34
Color Temp., 26
COMP, 11
Component, 10, 13
Contrast, 26
D
DCR, 26, 29
Device Auto Off, 32
Device List, 32
Device Menu Control, 32
Dimensions, 35
DISPLAY, 11
E
Eco, 11, 19, 26
F
Frequency, 15
H
HDMI, 10
HDMI Control, 32
Headphone Jack, 10
H. Position, 28
I
Input Source, 22
M
MENU, 11, 22, 23, 26, 27, 28, 29, 30, 32
Menu Language, 29
Menu timeout, 29
MODE, 11
MPAA, 11, 31
MTS, 11
Multi Language, 27
Music, 25
MUTE, 11, 25
N
Noise Reduction, 26P
Panel size, 35
PC Connection, 14
PC Setting, 28
Personal, 25
Phase, 10, 28, 34
Picture Mode, 34
Picture Setting, 26
Power, 4, 5, 34
Preset, 15, 26
Presetting PC Mode, 15
Presetting Video Mode, 15
R
Remote Control, 11, 16, 22, 24
, 26, 34
Reset All, 29
Resolution, 15, 35
S
SAP, 11, 27
Setting, 34
Setup, 14, 15, 29, 32, 34
Set-Up, 12
Sharpness, 26
Signal, 10, 13, 14, 15, 28, 34
Size, 35
Sleep, 11
Sleep Timer, 29, 34
Sound, 7, 8, 11, 25
Sound Mode, 27
Source, 11, 22, 34
SPDIF, 10, 14, 27, 35
Speaker, 27, 35
Specifications, 35
Speech, 25
Standard, 11, 15, 26
S-Video, 10, 14, 15, 30, 31, 35
T
Tint, 26
Treble, 27
Troubleshooting, 34
TV Auto On, 32
V
V-Chip, 11
Video, 10, 15, 26, 35
Vivid, 11, 19, 26
VOL, 11, 25, 34
Volume, 8, 25
V. Position, 28
W
Wall-Mount, 3
, 4, 12, 35
Y
YPbPr, 10, 11
Z
ZOOM, 11