Barco Phxg-91b, Phwx-81b, Phwu-81b Quick Setup Guide

							http://www.barco.com/en/products-solutions/projectors.htm
For more information and Maintenance Guidelines, 
check the Detailed User Manual on:
                - Remove the lens before transporting the projector. 
                - To save lamp lifetime, first switch the projector to standby mode 
                  and wait two minutes, then switch off the main power.
- Ensure that the projector is operating with clean filters.
- Do not block the ventilation in -and outlets.
- Using the projector at a non recommended tilt angle will reduce the lifetime of the lamps 
  or create unexpected behaviour of the unit. 
- Laser light can cause severe damage to the DMD. This damage is not covered by warranty.
10Important Info
R5905603-00 MAN QSG PH-series
see user manualADVANCED
service informationSERVICE
normal/eco/powerMODE
information on lamp statusINFO select language
LANGUAGE
adjust keystoneKEYSTONE
adjust lens shiftLENS SHIFT
adjust lens zoomLENS ZOOM
adjust lens focusLENS FOCUS
modify image aspect ratioASPECT RATIO
adjust image colourCOLOR
adjust image contrastCONTRAST
adjust lamp brightness levelBRIGHTNESS
Toggle between input sourcesINPUT
MODE
M
INFO
i
SERVICEiADVANCED
KEYSTONE
BRIGHTNESSCONTRASTCOLOR
LENS ZOOM
LANGUAGE
INPUT
LENS FOCUSASPECT RATIOLENS SHIFT
9OSD Lite Menu
8Starting Projector
OFF/STBY
ON
Error
During Start-up 1 sec
1 sec 1 sec1 sec1 sec
Status Led IR Position
Front IR Position
Rear
7Remote Control
Quick Keys
Quick Key 1
Quick Key 2Push Menu-UP twice 
for instant ‘Picture Mute’
(for Remote and keypad)
Push Menu-OK for
quick access to the
Focus/Zoom Menu
Feedback LED
Menu - UP
Menu - RIGHT
Menu - OK
Menu - LEFT Menu - DOWN
Home/Menu
Battery Lid
(Slide down
  to open)
Power
On/Off
6Input Cables
(See User Manual for detailed info on Inputs and PiP)
192
120
171
342
240
(283)
M4x10mm MAX. (4x) 
Unit Weight: 21 kg
Please check the manual of your
supportsystem for compatability
*(Ceiling mount system is not included)
5Ceiling Mount*
4Rear Cover
Loosen the 4 screws at the back and remove the rear cover to gain access to the inputs panel.
Please consult the 
full User Manual
for detailed info on 
Lens Assembly or
Lens Replacement.
This should only be
done by a qualified
Service Technician,
preferrably prior to
ceiling mounting.
3Lens Assembly
Direction to release
the side covers from the unit.
Loosen the four captive screws on each
of the two side panels.
2Side Cover Removal
(EU/US/CH)
user
manual
AAA (2x)
1Packaging Contents
Quick Setup Guide
Congratulations on purchasing
this productPHXG-91B
PHWX-81B
PHWU-81B