Bosch WAE 2436 E User Manual

123456
End of programme when ...
... $  (Start/Reload) flashes and  -0- appears on the 
display panel.
Interrupting the programme
Programmes at high temperatures: 
– Cool washing: Select  2 Rinse /	  Spin.
– Press  $ (Start/ Reload).
Programmes at lower temperatures:– 2  Rinse /	c Spin  (deactivate  = (Water Plus)  button) or 
select  > Empty .
– Press  $ (Start/ Reload).
Changing the programme, if ...
... you have selected the wrong programme by mistak e:
– Reselect the programme. 
– Press  $ (Start/...

7
Overview of programmes –> Refer to the table of consumption values on page  8 and notes on page 6.    Programmes °C max. Type of laundry
Additional functions; informationM Cottons
20, 40, 60, 90 °C
7 kg/
4 kg* Hard-wearing fabrics, heat-resistant fabrics made of  
cotton or linen
i
 SpeedPerfect*,  j EcoPerfect,  S (Reduced Ironing), 
=  (Water Plus)
+ Prewash
40 °C
I  Easy-Care
20, 40, 60 °C
3 kgEasy-care fabrics made of cotton, linen, synthetic  
fibres or blended fabrics
i
 SpeedPerfect,  j...

12
$
2	
$
2 	c =
>
$
$
$
$
Correct installation according to the  
separate Installation instructions.
Checking the machine
– Never use a damaged machine. 
– Inform customer service.
Connecting the mains plug
Make sure your hands are dry.  
Take hold of the plug only.
Turning the tap on
Compartment II
: Detergent for the main wash, water softener, blea ch, stain remover
Close the washing machine door. Take care not to tra
Pour liquid detergent into the appropriate dispense
Your washing machine...

34
End of programme when ...
... $ (Start/Reload) flashes and  -0- appears on the 
display panel.
Interrupting the programme
Programmes at high temperatures: 
– Cool washing: Select  2Rinse /	  Spin.
– Press  $ (Start/ Reload).
Programmes at lower temperatures:– 2  Rinse /	c Spin  (deactivate  =(Water Plus) button) or 
select  >Empty .
– Press  $ (Start/ Reload).
Changing the programme, if ...
... you have selected the wrong programme by mistak e:
– Reselect the programme. 
– Press  $ (Start/ Reload)....

56
$
2	
$
2 	c =button) or 
>
$
$
$
$
ä

‹‹‹‹‹‹‹‹‹‹‹‹‹‹
M
M j
M 
LIF 
@2	
=
> 
ÿ O
QI
#
$
~
0
‹‹
‹
Individual settings
‘ Ready in options button
When you select the programme, the relevant program me duration is displayed. You can 
delay the start of the programme before it begins.  The Ready in time can be set in 
increments of one hour up to a maximum of 24 hours.  Press the Ready in  button 
repeatedly until the required number of hours is di splayed (h = hour). Choose $...

7
Overview of programmes 
–> Refer to the table of consumption values on page 8 and notes on page 6.
    
Programmes °C max.Type of laundry
Additional functions; informationMCottons
20, 40, 60, 90 °C
7 kg/
4 kg* Hard-wearing fabrics, heat-resistant fabrics made of  
cotton or linen
i
 SpeedPerfect*,  j EcoPerfect,  S (Reduced Ironing), 
=  (Water Plus)
+ Prewash
40 °C
I Easy-Care
20, 40, 60 °C
3 kgEasy-care fabrics made of cotton, linen, synthetic  
fibres or blended fabrics
i
 SpeedPerfect,  j...

Mi j S =
I i j S
=
LIF i j S=
Q i j S
=
ÿ O ä
@ 2	c>
i
M MM
M jMI
LIFQ
: O
: O
9
Care          
Before washing for the first time
Do not put any laundry in the machine. Turn on the tap,  add approximately 1 litre of water and then ½ a measuri ng cup 
of detergent into compartment  II. Turn the programme selector to  I Easy-Care 60 °C  and choose $ (Start /Reload). 
At the end of the programme, turn the programme selector  to Off .
Machine housing, control panel
– Wipe with a soft, damp cloth. 
– Do not...

Mi j S =
I i j S
=
LIF i j S=
Q i j S
=
ÿ O ä
@ 2	c>
i
M MM
M jMI
LIFQ
: O
: O
I $
>
2 	c>
$
11
What to do if ...
‘Water is leaking out. – Attach/replace the drainage h ose correctly.
– Tighten the screw connection of the supply hose.
‘No water supply.  
Detergent not dispensed. –
$  (Start /Reload) not selected?
– Tap not turned on?
– Filter blocked? Clean the filter –>  page 10.
– Supply hose kinked or trapped?
‘Washing machine door  
cannot be opened. – Safety function active. Programme stopped?...