Canon EOS Rebel T5 1200D User Guide

							251
W Digital Print Order Format (DPOF)
 Sel.Image
Select and order images one by one.
To display the three-image display, press 
the  button. To return to the 
single-image display, press the  
button.
Press the  button to save the 
print order to the card.
[Standard] [Both]
Press the   keys to set the 
number of copies to be printed for the 
displayed image.
[Index]
Press the   keys to add a 
checkmark to the box . The image 
will be included in the index print.
 Byn
Select [Mark all in folder] and select the folder. A print order for one 
copy of all the images in the folder will be placed. If you select [Clear 
all in folder] and select the folder, the print order for all the images 
in the folder will be canceled.
 All image
If you select [Mark all on card], one copy of all the images on the 
card will be set for printing. If you select [Clear all on card], the print 
order will be cleared for all the images on the card.
Print Ordering
Quantity
Total images selected
Index icon Checkmark
 Note that RAW images and movies will not be included in the print order 
even if you set [Byn] or [All image].
 When using a PictBridge printer, print no more than 400 images for one 
print order. If you specify more than this, all the images may not be 
printed. 
						

							252
With a PictBridge printer, you can easily 
print images with DPOF.
1 Prepare to print.
 See page 240.Follow the “Connecting the Camera to a Printer” procedure up to step 5.
2 Under the [x1] tab, select [Print order].
3 Select [Print].
 [Print] will be displayed only if the camera is connected to a 
printer and printing is possible.
4 Set the [Paper settings] (p.242).
 Set the printing effects (p.244) if necessary.
5 Select [OK].
W Direct Printing of Print-Ordered Images
 Before printing, be sure to set the paper size.
 Certain printers cannot imprint the file number.
 If [Bordered] is set, certain printers may imprint the date on the border.
 Depending on the printer, the date may appear faint if it is imprinted on a 
bright background or on the border.
 Under [Adjust levels], [Manual] cannot be selected.
 If you stopped the printing and want to resume printing the remaining 
images, select [Resume]. Note that printing will not resume if any of the 
following are the case:
• You changed the print order of or deleted any print ordered images 
before resuming the printing.
• When index is set, you changed the paper setting before resuming the 
printing.
• The card’s remaining capacity was low when you paused the printing.
 If a problem occurs during printing, see page 248. 
						

							253
You can specify images (up to 998) to be used in a photobook. When 
you use EOS Utility (EOS software) to transfer images to a computer, 
the specified images will be copied into a dedicated folder. This function 
is useful for ordering photobooks online and for printing photobooks on 
a printer.
1Select [Photobook Set-up].
 Under the [x1] tab, select 
[Photobook Set-up], then press 
.
2Select [Select images].
 Select [Select images], then press 
.
XAn image will be displayed.
 To display the three-image display, 
press the  button. To return to 
the single-image display, press the 
 button.
3Select the image to be specified.
 Press the   keys to select 
the image to be specified, then press 
the   keys.
 Repeat this step to select another 
image. The number of images that 
have been specified will be displayed 
on the upper left of the screen.
 To cancel the image specification, 
press the   keys again.
 To return to the menu, press the 
 button.
p Specifying Images for a Photobook
Specifying One Image at a Time 
						

							p Specifying Images for a Photobook
254
You can specify all the images in a folder or on a card at one time.
When [x1: Photobook Set-up] is set 
to [All images in folder] or [All images 
on card], all the images in the folder or 
on the card will be specified.
To cancel the image specification, select 
[Clear all in folder] or [Clear all on 
card].
Specifying All Images in a Folder or on a Card
RAW images and movies cannot be specified.
Do not specify images already specified for a photobook in another camera 
for another photobook with this camera. The photobook settings may be 
overwritten. 
						

							255
11
Customizing the
Camera
You can customize various camera functions to suit 
your picture-taking preferences with Custom Functions. 
Custom Functions can be set and used only in Creative 
Zone modes.
 Creative Zone 
						

							256
1Select [Custom Functions (C.Fn)].
 Under the [53] tab, select [Custom 
Functions (C.Fn)], then press .
2Select the Custom Function 
number.
 Press the   keys to select 
the Custom Function number, then 
press .
3Change the setting as desired.
 Press the   keys to select 
the desired setting (number), then 
press .
 Repeat steps 2 and 3 if you want to 
set other Custom Functions.
 At the bottom of the screen, current 
Custom Function settings are 
indicated below the respective 
function numbers.
4Exit the setting.
 Press the  button.
XThe screen for step 1 will reappear.
Under [53: Clear settings], select [Clear all Custom Func. (C.Fn)] to 
clear all the Custom Function settings (p.190).
3 Setting Custom FunctionsN
Custom Function number
Clearing All Custom Functions 
						

							257
3 Setting Custom FunctionsN
* If you use an EX-series Speedlite (sold separately) equipped with an LED light, 
the LED light will turn on for AF-assist even in the d or c mode.
Custom Functions
C.Fn I: ExposureA Live View shooting
1Exposure level incrementsp.258k
2ISO expansionk
3 Flash sync. speed in Av mode p.259k
C.Fn II: Image
4Long exposure noise reductionp.260k
5High ISO speed noise reductionp.261k
6 Highlight tone priorityk
C.Fn III: Autofocus/Drive
7AF-assist beam firingp.262k (With f*)
C.Fn IV: Operation/Others
8Shutter/AE lock buttonp.263k
9Assign SET button
p.264
k (Except 3)
10 Flash button functionk
11LCD display when power ON
 Custom Functions cannot be set during movie shooting. (Settings 
already set will be disabled.)
 The shaded Custom Function does not function during Live View (LV) 
shooting. (Settings already set will be disabled.) 
						

							258
Custom Functions are organized into four groups based on the function 
type: C.Fn I: Exposure, C.Fn II: Image, C.Fn III: Autofocus/Drive, C.Fn 
IV: Operation/Others.
3 Custom Function SettingsN
C.Fn I: Exposure
C.Fn-1 Exposure level increments
0: 1/3-stop
1: 1/2-stop
Sets 1/2-stop increments for the shutter speed, aperture, exposure 
compensation, AEB, flash exposure compensation, etc. This is 
effective when you prefer to control the exposure in less fine 
increments than 1/3-stop.
C.Fn-2 ISO expansion
0: Off
1: On
When you set the ISO speed, you will be able to set “H” 
(equivalent to ISO 12800). Note that if [C.Fn-6: Highlight tone 
priority] is set to [1: Enable], “H” cannot be set.
With setting 1, the exposure level will be displayed in the viewfinder and on 
the LCD monitor as shown below. 
						

							259
3 Custom Function SettingsN
C.Fn-3 Flash sync. speed in Av mode
You can set the flash sync speed for flash photography in the aperture-
priority AE (f) mode.
0: Auto
The flash sync speed is set automatically within a range of 1/200 
sec. to 30 sec. to suit the scene’s brightness. With an external 
Speedlite, high-speed sync will also be possible.
1: 1/200-1/60 sec. auto
Prevents a slow shutter speed from being set in low-light 
conditions. It is effective for preventing subject blur and camera 
shake. However, while the subject will be properly exposed with 
the flash, the background may come out dark.
2:  1/200 sec. (fixed)
The flash sync speed is fixed to 1/200 sec. This more effectively 
prevents subject blur and camera shake than with [1/200-1/60 
sec. auto]. However, in low light, the subject’s background will 
come out darker than with [1/200-1/60 sec. auto].
When 1 or 2 is set, high-speed sync cannot be used with an external 
Speedlite. 
						

							3 Custom Function SettingsN
260
C.Fn II: Image
C.Fn-4 Long exposure noise reduction
0: Off
1: Auto
For 1 sec. or longer exposures, noise reduction is performed 
automatically if noise typical of long exposures is detected. This 
[Auto] setting is effective in most cases.
2: On
Noise reduction is performed for all exposures of 1 sec. or longer. 
The [2: On] setting may be effective for noise that cannot be 
detected or reduced with the [1: Auto] setting.
 With settings 1 and 2, after the picture is taken, the noise reduction 
process may take the same amount of time as the exposure. You cannot 
take another picture until the noise reduction process is completed.
 At ISO 1600 and higher, noise may be more pronounced with setting 2 
than with setting 0 or 1.
 With setting 1 or 2, if a long exposure is shot with the Live View image 
displayed, “BUSY” will be displayed during the noise reduction process. 
The Live View display will not appear until the noise reduction is 
completed. (You cannot take another picture.)