Canon lens TsE 45mm f28 User Manual
Have a look at the manual Canon lens TsE 45mm f28 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 7
ENG-6
3. Tilt Function
Tilting inclines the lens relative to the image plane. When the tilt scal\
e is set to the “0” position, the
focusing and imaging planes are parallel. However, tilting puts the focusing plane at an angle to the
imaging plane.
● Example 1●Example 2
To shoot so that all of an extensive subject is in focus, you must normally\
use a small aperture to
obtain a large depth of field. But tilting allows you to keep all of the\
subject in focus even when there
is insufficient depth of...](http://img.usermanuals.tech/thumb/14/1532/w64_lens-tse-45mm-f28-1478305081_d-6.png "Page 7
ENG-6
3. Tilt Function
Tilting inclines the lens relative to the image plane. When the tilt scal\
e is set to the “0” position, the
focusing and imaging planes are parallel. However, tilting puts the focusing plane at an angle to the
imaging plane.
● Example 1●Example 2
To shoot so that all of an extensive subject is in focus, you must normally\
use a small aperture to
obtain a large depth of field. But tilting allows you to keep all of the\
subject in focus even when there
is insufficient depth of...")
![Page 8
ENG-7
T
urn the tilt lock knob in the
direction of the arrow to lock
the amount of tilt for the
shot.
Loosen the tilt lock knob by
turning it in the direction of
the arrow.
T
urn the tilt knob to adjust
the amount of tilt. Focus the
shot by turning the focusing
ring.
Using Tilt
● When you tilt the lens, sharp portions of the tilt mechanism are exposed\
and care should be taken to avoid
touching these portions.
● If you use the tilt and shift functions on the TS-E24mm f/3.5L at the same time, only use...](http://img.usermanuals.tech/thumb/14/1532/w64_lens-tse-45mm-f28-1478305081_d-7.png "Page 8
ENG-7
T
urn the tilt lock knob in the
direction of the arrow to lock
the amount of tilt for the
shot.
Loosen the tilt lock knob by
turning it in the direction of
the arrow.
T
urn the tilt knob to adjust
the amount of tilt. Focus the
shot by turning the focusing
ring.
Using Tilt
● When you tilt the lens, sharp portions of the tilt mechanism are exposed\
and care should be taken to avoid
touching these portions.
● If you use the tilt and shift functions on the TS-E24mm f/3.5L at the same time, only use...")
![Page 10
ENG-9
Using ShiftTurn the shift lock knob in
the direction of the arrow to
lock the amount of shift for
the shot.
Loosen the shift lock knob
by turning it in the direction
of the arrow.
T
urn the shift knob to adjust
the amount of shift. Focus
the shot by turning the
focusing ring.
● When you shift the lens, sharp portions of the shift mechanism are expos\
ed and care should be taken to
avoid touching these portions.
● If you use the tilt and shift functions on the TS-E24mm f/3.5L at the same time, only...](http://img.usermanuals.tech/thumb/14/1532/w64_lens-tse-45mm-f28-1478305081_d-9.png "Page 10
ENG-9
Using ShiftTurn the shift lock knob in
the direction of the arrow to
lock the amount of shift for
the shot.
Loosen the shift lock knob
by turning it in the direction
of the arrow.
T
urn the shift knob to adjust
the amount of shift. Focus
the shot by turning the
focusing ring.
● When you shift the lens, sharp portions of the shift mechanism are expos\
ed and care should be taken to
avoid touching these portions.
● If you use the tilt and shift functions on the TS-E24mm f/3.5L at the same time, only...")
![Page 11
ENG-10
5. Rotation
The rotation function enables you to change the direction of tilt or
shift by rotating the tilt-shift mechanism.
With the lens mounted on the camera, push the rotation lock release
button towards the mount and then turn the tilt-shift mechanism.
●The mechanism can be rotated through ±90°. The lens clicks every 30° and
locks in place in the 90° position.
●When rotating the lens, set the tilt and shift scales to the “0” p\
osition.
● Note that rotating the tilt-shift mechanism quickly...](http://img.usermanuals.tech/thumb/14/1532/w64_lens-tse-45mm-f28-1478305081_d-10.png "Page 11
ENG-10
5. Rotation
The rotation function enables you to change the direction of tilt or
shift by rotating the tilt-shift mechanism.
With the lens mounted on the camera, push the rotation lock release
button towards the mount and then turn the tilt-shift mechanism.
●The mechanism can be rotated through ±90°. The lens clicks every 30° and
locks in place in the 90° position.
●When rotating the lens, set the tilt and shift scales to the “0” p\
osition.
● Note that rotating the tilt-shift mechanism quickly...")
![Page 14
ENG-13
10. Hoods
The EW-75B II, EW-79B II and ES-65 III lens hoods can keep unwanted light out of the lens\
, and
also protects the lens from rain, snow, and dust.
Attach the hood using the following procedure.
12
1
TS-E24mm f/3.5L
Turn the hood in the direction of the arrow to attach it
securely.
TS-E45mm f/2.8 • TS-E90mm f/2.8
1) Pressing the buttons on the base of the hood inwards, push the hood onto the hood mount on the lens.
2) Release the buttons so that the catches on the hood fit into the...](http://img.usermanuals.tech/thumb/14/1532/w64_lens-tse-45mm-f28-1478305081_d-13.png "Page 14
ENG-13
10. Hoods
The EW-75B II, EW-79B II and ES-65 III lens hoods can keep unwanted light out of the lens\
, and
also protects the lens from rain, snow, and dust.
Attach the hood using the following procedure.
12
1
TS-E24mm f/3.5L
Turn the hood in the direction of the arrow to attach it
securely.
TS-E45mm f/2.8 • TS-E90mm f/2.8
1) Pressing the buttons on the base of the hood inwards, push the hood onto the hood mount on the lens.
2) Release the buttons so that the catches on the hood fit into the...")
ENG-10 5. Rotation The rotation function enables you to change the direction of tilt or shift by rotating the tilt-shift mechanism. With the lens mounted on the camera, push the rotation lock release button towards the mount and then turn the tilt-shift mechanism. ●The mechanism can be rotated through ±90°. The lens clicks every 30° and locks in place in the 90° position. ●When rotating the lens, set the tilt and shift scales to the “0” p\ osition. ● Note that rotating the tilt-shift mechanism quickly while pressing on th\ e rotation lock release button may cause the shift lock knob to strike you\ r fingers. 02-7544_ENG 10.2.13 9:42 AM Page 10 COPY
ENG-11 The depth of field is the distance in front of and behind the plane of focus on the subject that appears sharp. The depth of field is indicated by the area between the depth-of-field scale lines below the distance scale. The numbers on the scale are F values, and for example, if the shooting distance is 1.5 m and the aperture is f/8, the area in focus will extend from about 1 m to 3 m. The infrared index corrects the focus setting when using monochrome infrared film. Focus on the subject in MF, then adjust the distance setting by moving the focusing ring to the corresponding infrared index mark. 6. Depth-of-Field Scale (TS-E24mm f/3.5L)7. Infrared Index(TS-E24mm f/3.5L) ● The depth-of-field scale is only valid when the tilt scale is set to the “0” position. ● The depth-of-field scale is an approximate indicator. ●The infrared index position is based on a wavelength of 800 nm. ● Be sure to observe the manufacturer’s instructions when using infrared film. ● Use a red filter also when you take the picture. Some EOS cameras cannot use infrared film. See the instructions for your EOS camera. 02-7544_ENG 10.2.13 9:42 AM Page 11 COPY
ENG-12 8.TS-E Tripod Adapter (Sold Separately)9. Exposure With some camera models, the tilt, shift and rotation functions can no longer be used when the camera is mounted directly on a tripod. When this happens, fit the optional TS-E tripod adapter into the tripod mount socket on the camera before mounting the camera on the tripod.Shots can be taken using AE (automatic exposure) as long as the tilt and shift scales are set to the “0” position. The use of AE is not recommended when the lens is tilted or shifted as exposure errors may result. It is recommended that you use the exposure values when the tilt and shift scales are set to the “0” position as a guide and then take the shot with as many exposure settings as possible. 02-7544_ENG 10.2.13 9:42 AM Page 12 COPY
ENG-13 10. Hoods The EW-75B II, EW-79B II and ES-65 III lens hoods can keep unwanted light out of the lens\ , and also protects the lens from rain, snow, and dust. Attach the hood using the following procedure. 12 1 TS-E24mm f/3.5L Turn the hood in the direction of the arrow to attach it securely. TS-E45mm f/2.8 • TS-E90mm f/2.8 1) Pressing the buttons on the base of the hood inwards, push the hood onto the hood mount on the lens. 2) Release the buttons so that the catches on the hood fit into the grooves on the mount. 02-7544_ENG 10.2.13 9:42 AM Page 13 COPY
ENG-14 Y ou can attach filters to the filter mounting thread on the front of the lens. 11. Filters (Sold Separately)Hoods ● Part of the picture may be blocked if the hood is not attached properly. ● When attaching or detaching the hood, grasp the base of the hood to turn it. To prevent deformation, do not grasp the rim of the hood to turn it. The hood can be reverse-mounted on the lens for storage. ● Only one filter may be attached. ● Use a polarizing Canon filter. ● To adjust the polarizing filter, first remove the lens hood. 02-7544_ENG 10.2.13 9:42 AM Page 14 COPY
ENG-15 12. Extension Tubes (Sold Separately) Y ou can attach extension tube EF12 II or EF25 II for magnified shots. The shooting distance and magnification are shown below. Attaching a 250D or 500D close-up lens enables close-up photography. Compatibility with close- up lenses is as follows. TS-E24mm f/3.5L • 250D: Cannot be used • 500D (72mm): 0.19 to 0.05 × TS-E45mm f/2.8•250D: Cannot be used • 500D (72mm): 0.25 to 0.09 × TS-E90mm f/2.8•250D (58mm): 0.69 to 0.36 × • 500D (58mm): 0.49 to 0.18 × 13. Close-up Lenses (Sold Separately) EF12 II 171 179 0.62 0.49 EF25 II 166 167 1.21 1.10Focusing Distance Range (mm) Magnification ( ×) Close distance Long distance Close distance Long distance TS-E24mm f/3.5L EF12 II 239 299 0.44 0.27 EF25 II Cannot be used Focusing Distance Range (mm) Magnification ( ×) Close distance Long distance Close distance Long distance TS-E45mm f/2.8 EF12 II 415 817 0.43 0.14 EF25 II 373 486 0.60 0.31 Focusing Distance Range (mm) Magnification ( ×) Close distance Long distance Close distance Long distance TS-E90mm f/2.8 02-7544_ENG 10.2.13 9:42 AM Page 15 COPY
ENG-16 Specifications Each degree from 0 to ±6°(light gray), ±7° and ±8° (red) Each mm from 0 to ± 7mm (light gray), ±8 to ±11mm (red) TS-E24mm f/3.5L TS-E45mm f/2.8 TS-E90mm f/2.8Focal Length/Aperture24mm f/3.5 45mm f/2.890mm f/2.8Lens Construction9 groups, 11 elements 9 groups, 10 elements 5 groups, 6 elementsMinimum Aperture f/22f/22f/32 Angle of ViewDiagonal84° 51°27° (Normal)Vertical53° 30°15° 11’Horizontal74° 44°22° 37’Min. Focusing Distance0.3m (1.0ft.) 0.4m (1.3ft.)0.5m (1.6ft.)Max. Magnification 0.14× 0.16× 0.29× Field of View 173 ×263mm 150 ×226mm 82 ×123mm (6.8 ×10.4inch) (5.9 ×8.9inch) (3.2 ×4.8inch)Tilt amount ±8°Shift amount±11mm Tilt scale display Each degree from 0 to ±8° (light gray) Shift scale displayEach mm from 0 to ±11mm (light gray) Rotation mechanismLocks at –90°, 0° and +90°, clicks every 30° 02-7544_ENG 10.2.13 9:42 AM Page 16 COPY
ENG-17 Specifications ● The lens length is measured from the mount surface to the front end of t\ he lens. Add 21.5 mm to include the E-58/E-72 lens cap and dust cap, and 24.2 mm for the E-58 II\ /E-72 II. ● The size and weight listed are for the lens only, except as indicated. ● The EF1.4× II/EF2×II extenders cannot be used with the lenses listed above. ● Aperture settings are specified on the camera. ● All data listed is measured according to Canon standards. ● Product specifications and appearance are subject to change without noti\ ce. TS-E24mm f/3.5L TS-E45mm f/2.8 TS-E90mm f/2.8Filter Diameter 72mm 58mmMax. Diameter and Length78 ×86.7mm (3.1 × 3.4inch) 81 ×90.1mm (3.2 × 3.5inch) 73.6 ×88mm (2.9 ×3.5inch)W eight 570g (18.4oz) 645g (20.8oz) 565g (18.2oz)Hood EW-75B II EW-79B II ES-65 IIILens Cap E-72/E-72 IIE-58/E-58 II Case LP1216LP1016 02-7544_ENG 12.7.11 11:16 AM Page 17 COPY
CT1-8522-004 1208SZ © CANON INC. 2006 00-8522(7544)H4_CID_Ver3.3 12.7.11 11:35 AM ページ 1 COPY