Canon printer Color imageCLASS MF8380Cdw User Manual

							2-13
Document	and	Paper	Handling
(\f) Align the edges of the\I envelo\bes on a flat sur\Iface.
	 		 	 	
(5) Gently insert the \ba\ber into the multi-\bur\bose tray with the 
\brint side u\b.
6 Align the p\fper guides \Fsecurely \fg\finst the edg\Fes 
of the p\fper.
	 		
 IMPORT\bNT
Be sure to align the paper guides securely against the 
edges of the paper.
If the \ba\ber guides a\Ire too loose or too tight, this may result in 
misfeeds or \ba\ber jams.
	 		
7 Specify the lo\fded p\F\fper size \fnd type.
 “Setting the Pa\ber Size and Ty\be” (→P.2-18)
In the Manual Feed Slot (MF8080Cw 
Only)
Before loading \ba\ber in t\Ihe manual feed slot, see 
“Precautions when Loading Pa\ber” (→P.2-1\f).
\bse	the	manual	feed	slot	when	you	want	to	copy	or	print	on	a	
paper	that	is	different	from	what	is	in	the	paper	cassette.
1 
Slide the p\fper guid\Fes to \flign them securely 
\fg\finst the edges o\Ff the p\fper, then lo\fd the 
p\fper deeply to b\fck of the tr\fy.
	 		
 IMPORT\bNT
Be sure to insert the paper cassette.
If the \ba\ber cassett\Ie is not inserted, you cannot \brint from the 
manual feed slot.
Be sure to align the paper guides securely against the 
edges of the paper.
If the \ba\ber guides a\Ire too loose or too tight, this may result in 
misfeeds or \ba\ber jams.
 NOTE
When loading paper with a letterhead or logo
See “Pa\ber Loading Orientation” (→P.2-15), and load the \ba\ber in the 
\bro\ber orientation.
2 Support the p\fper with your h\fnds \fs shown in 
the figure, \fnd insert the p\fper until it touches 
the b\fck of the tr\fy.
When the \ba\ber touches the back of \Ithe tray, it is caught by the 
slot.
Only one sheet of t\Ihe \ba\ber can be load\Ied in the manual feed slot.
 “Pa\ber Loading Orientation” (→P.2-15)
	
		   
						

							2-14
Document	and	Paper	Handling
When loading envelopes
Close the envelo\be fla\b.
			
3 Specify the lo\fded p\F\fper size \fnd type.
 “Setting the Pa\ber Size and Ty\be” (→P.2-18)
Precautions when Loading Paper
 IMPORT\bNT
Be sure to align the paper guides securely against the 
edges of the paper.
If the \ba\ber guides a\Ire too loose or too tight, this may result in 
misfeeds or \ba\ber jams.
When using paper that has been poorly cut
If you use \ba\ber that ha\Is been \boorly cut, multi\ble shee\Its of \ba\ber 
may be fed at once. In this case, fan the \ba\ber tho\Iroughly, and then 
align the edges of the\I stack \bro\berly on a hard, flat surface.
Do not exceed the load li\fit \R\fark when loading pap\Rer.
Make sure that the \ba\ber st\Iack does not exceed the line of th\Ie load 
limit mark. If the \ba\ber stack e\Ixceeds the load limi\It mark lines, this 
may result in misfeeds.
When printing on envelopes
Load envelo\bes with the front side (non-glued side) facing \Iu\b. You 
cannot \brint on the reverse side of envelo\bes.
Also, be sure to close the fla\b bef\Iore loading envelo\bes.
 NOTE
For \fore infor\fation on supported paper types
 “Su\b\borted Pa\ber Ty\bes” (→P.2-6)
\bbbreviations on the paper guides inside t\Rhe paper 
cassette
P\fper size
P\fper guide
Legal LGL
Letter LTR
Executive EXEC
 C\bUTION
Be careful when handling\R paper.
Handle \ba\ber carefully not to cut your hands with the \Iedges 
of the \ba\ber.
Precautions when inser\Rting the paper cassette
Be careful not to catch your fingers.   
						

							2-15
Document	and	Paper	Handling
Paper Loading Capacity
 
● MF8380Cdw
(A)
(B)
(C)
P\fper Type P\fper source 
(A) 
Multi-
purpose tr\fy (B) 
C\fssette 1 (C)
C\fssette 2  (option\fl)
Plain	paper		
(Ex.	21	l\f	Bond	
(80	g/m²)) Approx.	50	
sheets Approx.	250	
sheets Approx.	250	
sheets	
Heavy	paper	
(Ex.	25	l\f	Bond	
(91	g/m²)) Approx.	30	
sheets Approx.	200	
sheets Approx.	200	
sheets
Heavy	paper	
(Ex.	34	l\f	Bond	
(128	g/m²)) Approx.	20	
sheets Approx.	150	
sheets Approx.	150	
sheets	
Transparency
(\flack	and	
white	printing	
only) Approx.	20	
sheets Approx.	50	
sheets Approx.	50	
sheets
La\fel Approx.	20	
sheets Approx.	50	
sheets	 Approx.	50	
sheets	
Coated	paper Approx.	20	
sheets Approx.	50	
sheets Approx.	50	
sheets	
Envelope	 Approx.	5	
sheets Approx.	10	
sheets Approx.	10	
sheets
 
● MF8080Cw
(A)(B)
P\fper type P\fper source
(A)
M\fnu\fl feed  slot (B)
C\fssette 1
Plain	paper		
(Ex.	21	l\f	Bond	(80	g/m²)) 1	sheetApprox.	150	
sheets	
Heavy	paper		
(Ex.	25	l\f	Bond	(91	g/m²)) 1	sheetApprox.	120	
sheets	
Heavy	paper		
(Ex.	34	l\f	Bond	(128	g/m²) 1	sheetApprox.	100	
sheets
Transparency		
(\flack-and-white	printing	only) 1	sheetApprox.	50	
sheets
La\fel	 1	sheetApprox.	50	
sheets
Coated	paper 1	sheetApprox.	100	
sheets	
Envelope 1	sheetApprox.	10	
sheets
Paper Loading Orientation
Be	sure	to	load	paper	in	portrait	orientation.
 
● Paper cassette
	
 
● Multi-purpose tray (MF8380Cdw only)
	
 
● Manual feed slot (MF8080Cw only)
	   
						

							2-16
Document	and	Paper	Handling
When printing paper with a letterhead or logo 
(previously printed paper)
Load	the	paper	in	the	proper	orientation	as	follows.
(:	Feeding	direction)
Paper cassette
Portr\fit l\fyoutL\fndsc\fpe l\fyout 
1-sided	
printing
(When	
“Selecting	
the	Print	Side	
(MF8380Cdw	
Only)”	( → P.2-21)	
is	set	to	
	
(the	default	
setting))
(with	the	printing	
side	facing	up)(with	the	printing	
side	facing	up)
1-sided	
printing
(When	
“Selecting	
the	Print	Side	
(MF8380Cdw	
Only)” 	( → P.2-21)	
is	set	to	)
(with	the	printing	
side	facing	down)(with	the	printing	
side	facing	down)
Automatic	
2-sided	
Printing	
(MF8380Cdw	
Only)
(with	the	front	side	
facing	down)(with	the	front	side	
facing	down)
Multi-purpose tray (MF8380Cdw Only)
Portr\fit l\fyout L\fndsc\fpe l\fyout
1-sided	
printing
(When	
“Selecting	
the	Print	Side	
(MF8380Cdw	
Only)”	( → P.2-21)	
is	set	to	
	
(the	default	
setting))
(with	the	printing	
side	facing	up)(with	the	printing	
side	facing	up)
1-sided	
printing
(When	
“Selecting	
the	Print	Side	
(MF8380Cdw	
Only)” 	( → P.2-21)	
is	set	to	)
(with	the	printing	
side	facing	down)(with	the	printing	
side	facing	down)
Automatic	
2-sided	
Printing
(with	the	front	side	
facing	down)(with	the	front	side	
facing	down)
Manual feed slot (MF8080Cw Only)
Portr\fit l\fyout L\fndsc\fpe l\fyout
1-sided	
printing
(with	the	printing	
side	facing	up)(with	the	printing	
side	facing	up)
Printing on Envelopes
Load	envelopes	with	the	front	side	(non-glued	side)	facing	
up	as	follows.
(
:	Feeding	direction)
Paper cassette
Envelope Monarch*, No.10, DL, ISO-C5
Load	the	envelopes	so	that	the	flap	is	toward	the	left	of	the	
paper	cassette	when	they	are	viewed	from	the	front.
	 		 	 	
Close the flap and load 
the envelope.
 * You can load Envelo\be Monarch in the \ba\ber cas\Isette only for 
MF8080Cw.
Envelope ISO-B5
Load	the	envelopes	so	that	the	flap	is	toward	the	\fack	of	
the	paper	cassette	when	they	are	viewed	from	the	front.
	 		 	 	
Close the flap and load 
the envelope.
Multi-purpose tray (MF8380Cdw Only)
Envelope Monarch, No.10, DL, ISO-C5
Load	the	envelopes	so	that	the	flap	is	toward	the	left	of	the	
machine	when	it	is	viewed	from	the	front.
	
Close the flap and load 
the envelope.   
						

							2-17
Document	and	Paper	Handling
Envelope ISO-B5
Load	the	envelopes	so	that	the	flap	is	toward	the	\fack	of	
the	machine	when	it	is	viewed	from	the	front.
	
Close the flap and load 
the envelope.
Manual feed slot (MF8080Cw Only)
Envelope Monarch, No.10, DL, ISO-C5
Load	the	envelopes	so	that	the	flap	is	toward	the	left	of	the	
machine	when	it	is	viewed	from	the	front.
	
Close the flap and load 
the envelope.
Envelope ISO-B5
Load	the	envelopes	so	that	the	flap	is	toward	the	\fack	of	
the	machine	when	it	is	viewed	from	the	front.
	
Close the flap and load 
the envelope.   
						

							2-18
Document	and	Paper	Handling
Whenever	you	change	the	paper	size	and	type	loaded	in	the	
cassette	and	the	tray,	follow	the	procedure	in	this	section	to	adjust	
the	paper	size	and	type	settings	for	the	cassette	and	the	tray.
 IMPORT\bNT
If the setting is d\Rifferent fro\f the size of the loaded pa\Rper
An error message a\b\bears, or \brinting is not \berformed correctly.
For the Paper Cassette
Reset
OKSelect Paper/Settings
Keys to be used for this operation
1  Press [] (Select P\fper/Settings).
2 Select  with [] or [], \fnd then 
press [OK].
	 		
Select Paper
      MP Tray
      LTR:Plain 2
      LTR:Plain 2
 Paper Settings
1
2
3  Select  or  with [] or [], 
\fnd then press [OK].
 is dis\blayed only when the o\b\Itional \ba\ber cassett\Ie 
(Cassete 2) is installed i\In MF8380Cdw.
	 		
Paper Settings
 Multi-Purpose Tray
 Drawer 1
 Drawer 2
 Register Custom Paper
4 Select \f p\fper size with [] or [], \fnd then 
press [OK].
*  When registering the custom \ba\ber, see  “Registering a 
Custom Pa\ber Size” (→P.2-19).
*  The registered custom \ba\ber is listed at the to\b. Select it with  
[
].
	 		
Paper Size
 LTR
 LGL
 STMT
 EXEC
5 Select \f p\fper type with [] or [], \fnd then 
press [OK].
	 		
Paper Type
 Plain 2 (19 lb Bond-
 Recycled
 Color
 Heavy 1 (24  lb  Bon d...
6  Press [] (Reset) to return to st\fndby mode.
Registering the Default \RPaper Settings for 
the Multi-purpose Tray (Manual Feed Slot)
If	you	want	to	always	load	the	same	paper	in	the	multi-
purpose	tray	(manual	feed	slot),	register	the	default	paper	
using	the	following	procedure.
 NOTE
If the default paper is registered
The setting screen is not dis\blayed when \ba\ber is loa\Ided.
Reset Numeric keys
OKSelect Paper/Settings
Keys to be used for this operation
1  Press [] (Select P\fper/Settings).
2 Select  with [] or [], \fnd then 
press [OK].
	 		
Select Paper
      MP Tray
      LTR:Plain 2
      LTR:Plain 2
 Paper Settings
1
2
Setting the Paper Size and Type    
						

							2-19
Document	and	Paper	Handling
3 Select  with [] or [], \fnd 
then press [OK].
	 		
Paper Settings
 Multi-Purpose Tray
 Drawer 1
 Drawer 2
 Register Custom Paper
4 Select  with [] or [], \fnd then press [OK].
	 		
Register Default Set.
 Off
 On
 Set Details
5 Select  with [] or [], \fnd then 
press [OK].
	 		 	 	
1
2
Select Paper
     LTR:Plain 2
     LTR:Plain 2
     LTR:Plain 2
 Paper Settings
6 Select  with [] or [], \fnd 
then press [OK].
	 		 	 	
Paper Settings
 Multi-Purpose Tray
 Drawer 1
 Drawer 2
 Register Custom Paper
7 Select  with [] or [], \fnd then 
press [OK].
	 		 	 	
Register Default Set.
 Off
 On
 Set Details
8 Select \f p\fper size with [] or [], \fnd then 
press [OK].
*  When registering the custom \ba\ber, see  “Registering a 
Custom Pa\ber Size” (→P.2-19).
*  The registered custom \ba\ber is listed at the to\b. Select it with  
[
].
	 		 	 	
Paper Size
 LTR
 LGL
 STMT
 EXEC
If you select 
Specifies	the	size	of		direction	and		direction	of	the	
custom	paper.
(1) Select the direction with [] or [], and then \bress [OK].
	 		 	 	
Specify Size
         
         X: 0 "
         Y: 0 "
X
Y
(2) S\becify the size with [] or [], and then \bress [OK].
	 		 	 	
Set Length for X
(3-8_1/2)
3_0/0   "
(3)  Select  with [] or [], and then \bress [OK].
	 		 	 	
Specify Size
         
         X: 3 "
         Y: 5 "
X
Y
9 Select the p\fper type with [] or [], \fnd then 
press [OK].
	 		
Paper Type
 Plain 2 (19 lb Bond-
 Recycled
 Color
 Heavy 1 (24  lb  Bon d...
10  Press [] (Reset) to return to st\fndby mode.
Registering a Custo\f Paper Size
You	can	register	sizes	and	types	of	frequently	used	paper.
Registered	paper	is	displayed	when	paper	settings	are	
specified	for	each	paper	source.
•	 Paper	cassette
Paper	size	setting	screen
	
Paper Size
 1. 7 x 9 "
 LTR
 LGL
 STMT
 “For the Pa\ber Cassette” (→P.2-18)
•	Multi-purpose	tray	(manual	feed	slot)
-	 When		is	set	to		(default)	
The	screen	to	\fe	displayed	when	paper	is	loaded	in	the	
multi-purpose	tray	(manual	feed	slot)
	 	
Paper Size (MP Tray)
 1. 7 x 9 "
 LTR
 LGL
 STMT   
						

							2-20
Document	and	Paper	Handling
-	 When	<	Register	Default	Set.>	is	set	to		Paper	size	setting	screen
	 	
Paper Size (MP Tray)
 1. 7 x 9 "
 LTR
 LGL
 STMT
   “Registering the Default Pa\ber Settings for the Multi-\bur\bose Tray 
(Manual Feed Slot)” (→P.2-18)
Reset Numeric keys
OKSelect Paper/Settings
Keys to be used for this operation
1  Press [] (Select P\fper/Settings).
2 Select  with [] or [], \fnd then 
press [OK].
	 		
Select Paper
      MP Tray
      LTR:Plain 2
      LTR:Plain 2
 Paper Settings
1
2
3  Select  with [] or [], 
\fnd then press [OK].
	 		
Paper Settings
 Multi-Purpose Tray
 Drawer 1
 Drawer 2
 Register Custom Paper
4 Select  with [] or [], \fnd 
then press [OK].
When selecting the registered custom \ba\ber, you can edit and 
delete the custom \ba\ber.
	 		
Register Custom Paper
 1. Not Registered
 2. Not Registered
 3. Not Registered
5 Specifies the size of  direction \fnd  
direction.
(1)  Select the direction with [] or [], and then \bress [OK].
	 		 	 	
Specify Size
         
         X: 0 "
         Y: 0 "
X
Y
(2) S\becify the size with [] or [], and then \bress [OK].
You can also enter values using the \Inumeric keys when 
entering in millimeter.
	 		 	 	
Set Length for X
(3-8_1/2)
3_0/0   "
(3)  Select  with [] or [], and then \bress [OK].
	 		 	 	
Specify Size
         
         X: 3 "
         Y: 5 "
X
Y
6 Select the p\fper type with [] or [], \fnd then 
press [OK].
	 	
Paper Type
 Plain 2 (19 lb Bond-
 Recycled
 Color
 Heavy 1 (24 lb  Bon d...
7  Press [] (Reset) to return to st\fndby mode.   
						

							2-21
Document	and	Paper	Handling
Specify	whether	to	print	only	on	the	front	side	of	paper	for	
1-sided	printing	so	that	the	odd	pages	are	always	printed	on	
the	front	side	for	\foth	1-sided	and	2-sided	printing.
The	print	side	for	1-sided	printing	varies	depending	on	the	
setting	specified.	To	use	preprinted	paper,	read	
	“Paper	
Loading 	Orientation” 	( → P.2-15) 	carefully 	to 	place 	the 	paper 	stack 	in	
the	correct	orientation.
 IMPORT\bNT
Paper Size and Paper Type
If you select unsu\b\borted \ba\ber size or \ba\ber ty\be for 2-sided 
\brinting, the settings a\b\bli\Ied in this section will be invalid.
When  is selected 
(the default setti\Rng)
All	pages	(odd	and	even)	are	printed	on	the	\fack	side	for	
1-sided	printing	while	the	odd	pages	are	printed	on	the	first	
side	for	2-sided	printing,	as	shown	\felow.
*	 Make	sure	to	place	the	stack	correctly	to	use	preprinted	
paper,	as	the	side	to	\fe	placed	face	up	varies	\fetween	
1-sided	and	2-sided	printing.
1-sided 
printing
2-sided  printing Front
Back
Select	this	setting	when
•	 using	paper	types	other	than	preprinted	paper
•	 using	preprinted	paper	only	for	1-sided	printing
When  is selected
All	pages	are	printed	on	the	first	side	for	1-sided	printing	so	
the	odd	pages	are	always	printed	on	the	first	side	for	\foth	
1-sided	and	2-sided	printing,	as	shown	\felow.
*	 The	side	to	\fe	placed	face	up	is	the	same	\fetween	1-sided	
and	2-sided	printing,	even	when	using	preprinted	paper.
1-sided 
printing
2-sided  printing Front
Back
Select	this	setting	when
•	 using	preprinted	paper	for	\foth	1-sided	and	2-sided	
printing
Menu
OK
Keys to be used for this operation
1  Press [] (Menu).
2 Select  with [] or [], \fnd 
then press [OK].
	 		
Menu
 Network Settings
 Preferences
 Timer Settings
 Common Settings
3 Select  with [] or 
[
], \fnd then press [OK].
	 		
Common Settings
 Drawer Auto Selection
 Switch Paper Feed M e..
4  Select the p\fper source to specify with [] or 
[
], \fnd then press [OK].
 is dis\blayed only when the o\b\Itional \ba\ber cassett\Ie 
(Cassette 2) is installed i\In MF8380Cdw.
	 		
Paper Feed Method
 Multi-Purpose Tray
 Drawer 1
 Drawer 2
5 Select  or  with [
] or [], \fnd then press [OK].
	 		
Multi-Purpose Tray
 Print Speed Priority
 Print Side Priority
Selecting the Print Side (MF8380Cdw Only)    
						

							2-22
Document	and	Paper	Handling
When	specifying	,	load	paper	
as	follows.
(
:	Feeding	direction)
*	 For	details	on	the	procedure	for	loading	paper	
when	using	multi-purpose	tray	or	when	printing	
pages	of	the	landscape	layout,	see	 “Paper	Loading	
Orientation” 	(→P.2-15).
When	performing	
1-sided	printing When	performing	
2-sided	printing
Load	paper	with	the	
printing	side	facing	
up.
Load	paper	with	the	
front	side	(first	page)	
facing	down.
 When	specifying	,	load	paper	as	
follows.
(
:	Feeding	direction)
*	 For	details	on	the	procedure	for	loading	paper	
when	using	multi-purpose	tray	or	when	printing	
pages	of	the	landscape	layout,	see	 “Paper	Loading	
Orientation” 	(→P.2-15).
The	procedure	for	loading	paper	is	the	same	
for	2-sided	printing	and	1-sided	printing.
•	When	performing	1-sided	printing,	load	
paper	with	the	printing	side	facing	down.
•	 When	performing	2-sided	printing,	load	
paper	with	the	front	side	(first	page)	facing	
down.
6  Press [] (Menu) to close the menu sc\Freen.