Cisco 881w Manual
Have a look at the manual Cisco 881w Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 53 Cisco manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
1-61 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overview Cisco 860, 880, 890 Series NoteConfiguring the codec complexity setting to support secure calls uses DSP resources, but does not affect the maximum number of supported calls. Figure 1-29 shows the front panel details of the Cisco 881-V, Cisco 887VA-V, and Cisco 887VA-V-W. Figure 1-29 Front Panel of the Cisco 881-V, Cisco 887VA-V, and Cisco 887VA-V-W Routers Table 1-28 Maximum Number of Supported Calls Flexible Complexity Medium Complexity High Complexity C881-V986 C887VA-V886 C887VA-V-W 8 8 6 246861 12 1LEDs2USB port
1-62 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overview Cisco 860, 880, 890 Series Figure 1-30 shows the back panel for the Cisco 887VA-V-W router. The Cisco 887VA-V (non-wireless) router does not have the antennas on the back panel. Figure 1-30 Back Panel of the Cisco 887 VA-V Router Figure 1-31 shows the back panel for the Cisco 881-V router. Figure 1-31 Back Panel of the Cisco 881-V Router 246864 overP O TS VD SL/AD SLC 887VA -W VO ICE 3 4 5 6 14568910732 11 1Data BRI7Reset Button 2Voice BRI8Power connector 3Voice ports—four FXS/DID ports9 Earth ground connection 4Fast Ethernet LAN—four ports10Kensington security slot 5Console Port11Primary WAN port—VDSL/ADSL over POTS 6PoE power connector (optional) 246866 C881 VO ICE 3 4 5 6 7 14568910732
1-63 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overview Cisco 860, 880, 890 Series Cisco 880 Series with Embedded WLAN Antennas Some Cisco 880W, 880WD, and 880-WD ISRs have three embedded WLAN antennas. These ISRs are fixed-platform routers that: Provide integrated VPN, embedded Wi-Fi CERTIFIED™, 802.11b/g/n-compliant wireless AP, and backup capabilities. Use single-band (2.4 GHz) WLAN cards or dual-band (2.4 GHz and 5 GHz) WLAN cards. Require a single external power supply: a 30-W power supply for non-POE-enabled routers or a 60-W power supply for POE-enabled routers. Have a fixed 512 MB of system memory. For information on configuring the Cisco 880 series ISRs, see Cisco 880 Series Integrated Services Router Software Configuration Guide. Cisco 887VA-WD Figure 1-32 shows the front panel details of the C887VA-WD-A-K9 and C887VA-WD-E-K9 ISRs. The front panel has LEDs only. All the ports are in the back panel. Figure 1-32 Front Panel of the C887VA-WD-A-K9 and C887VA-WD-E-K9 ISRs 1Fast Ethernet WAN port6PoE power connector (optional) 2Voice BRI ports7Reset button 3Voice ports—four FXS/DID ports and one FXO port.8Power connector 4Fast Ethernet LAN—four ports9Earth ground connection 5Console Port10Kensington security slot 284983 OK PPP WLAN POE 01 LINK 2.4GHz 5GHz Cisco 800 SeriesFE LAN VPN 0123 xDSL CD DATA
1-64 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overview Cisco 860, 880, 890 Series Figure 1-33 shows the back panel details of the C887VA-WD-A-K9 and C887VA-WD-E-K9 ISRs. Figure 1-33 Back Panel of the C887VA-WD-A-K9 and C887VA-WD-E-K9 ISRs C881WD Figure 1-34 shows the front panel details of the C881WD-A-K9 and C881WD-E-K9 ISRs. The front panel has LEDs only. All the ports are in the back panel. Figure 1-34 Front Panel of the C881WD-A-K9 and C881WD-E-K9 ISRs 284988 Cisco 887VA-WD AUX CONSOLE FE LANPOE OPTION REQUIRES 5A POWER ADAPTOR 3210RESET 12VDC 5A0 O overPOTS 89 1234567 284988 Cisco 887VA-WD AUX CONSOLE FE LANPOE OPTION REQUIRES 5A POWER ADAPTOR 3210RESET 12VDC 5A0 O overPOTS 89 1234567 1USB port6Power connector 24-port 10/100 Ethernet switch7Kensington security slot 3Serial port—console or auxiliary8Power switch 4 NoteNo separate PoE power supply is required for routers with embedded WLAN antennas. For information on system power supply requirements when PoE is enabled, see the “Power over Ethernet Module” section on page 1-143.9VDSL/ADSL port 5Reset button 284982 OK PPPFE4 WAN WLANPOE 01 LINK 2.4GHz 5GHz Cisco 800 SeriesFE LAN VPN 0123
1-65 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overview Cisco 860, 880, 890 Series Figure 1-35 shows the back panel details of the C881WD-A-K9 and C881WD-E-K9 ISRs. Figure 1-35 Back Panel of the C881WD-A-K9 and C881WD-E-K9 ISRs C881G-B/S/V-K9 ISRs The C881G-B-K9, C881G-S-K9, and C881G-V-K9 ISRs are members of the Cisco 880 series data routers. These routers provide integrated Virtual Private Network (VPN), 802.11b/g/n-compliant wireless Access Point (AP), 3G, and backup capabilities. For information on configuring Cisco 880 Series ISRs, see Cisco 880 Series Integrated Services Router Software Configuration Guide. C881GW-S/V-A-K9 ISRs The C881GW-S-A-K9 and C881GW-V-A-K9 ISRs are members of the Cisco 880G series data routers. These routers provide integrated VPN, embedded Wi-Fi CERTIFIED™, 802.11b/g/n-compliant wireless AP, 3G, and backup capabilities. For information on configuring Cisco 880 Series ISRs, see Cisco 880 Series Integrated Services Router Software Configuration Guide. 284987 Cisco 881WD AUX CONSOLE FE LANPOE OPTION REQUIRES 5A POWER ADAPTOR 3210RESET 12VDC 5A0 OFE WAN 4 9 21345678 1Primary WAN port—10/100 FE6Reset button 2USB port7Power connector 34-port 10/100 Ethernet switch8Kensington security slot 4Serial port—console or auxiliary9Power switch 5 NoteNo separate PoE power supply is required for routers with embedded WLAN antennas. For information on system power supply requirements when PoE is enabled, see the “Power over Ethernet Module” section on page 1-143.
1-66 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overview Cisco 860, 880, 890 Series C881G-U-K9 ISRs The C881G-U-K9 ISR is a member of the Cisco 880 series data routers. These routers provide integrated Virtual Private Network (VPN), embedded Wi-Fi CERTIFIED™, 802.11b/g/n-compliant wireless Access Point (AP), 3G, and backup capabilities. For information on configuring Cisco 880 Series ISRs, see Cisco 880 Series Integrated Services Router Software Configuration Guide. HSPA+ Versions of the Fixed-Platform ISRs The C881G+7-K9, C886VAG+7-K9, C887VAG+7-K9, C887VAMG+7-K9, C888EG+7-K9, C881GW+7-A-K9, C881GW+7-E-K9, C887VAGW+7-A-K9, and C887VAGW+7-E-K9 ISRs are members of the Cisco 880G series data routers. These routers provide integrated VPN, embedded Wi-Fi CERTIFIED™, 802.11b/g/n-compliant wireless AP, 3G, and backup capabilities. For information on configuring Cisco 880 Series ISRs, see Cisco 880 Series Integrated Services Router Software Configuration Guide. Cisco C881, C886, and C887 Series ISRs Cisco C881, C886, and C887 Series ISRs offer broadband speed and simplified management to small businesses, small enterprise branches, and teleworkers. The Cisco C881, C886, and C887 Series ISR models have a lead-free, fanless chassis and are updated versions of the previous Cisco 881, 886, and 887 series (excluding 3G and wireless models). Information provided in this section is applicable for the following models: Cisco C881 Cisco C886VA, Cisco C886VAJ (Annex J) Cisco C887VA, Cisco C887VAM (Annex M) Ta b l e 1 - 2 9 provides information about important hardware specifications pertaining to Cisco C881, C886, and C887 Series Routers. Table 1-29 Hardware Specifications of Cisco C881, C886, and C887 Series Routers Hardware Description Flash Memory 256 MB Main Memory 1 GB DDR RAM; fixed and not extendable USB port A USB 2.0-compliant port located at the back panel FAN Fanless chassis PoE Two internal PoE ports WA N C881— FE C886—VDSL/ADSL over ISDN with ISDN back up C887—VDSL/ADSL over POTS
1-67 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overview Cisco 860, 880, 890 Series For detailed hardware specifications, see the Cisco 880 Series hardware data sheet at: http://www.cisco.com/en/US/prod/collateral/routers/ps380/data_sheet_c78_459542_ps380_Products_ Data_Sheet.html Cisco C881 Router Figure 1-36 shows the front panel of the Cisco C881 Router. Figure 1-36 Front Panel of the Cisco C881 Router For detailed description about the LEDs on the Cisco C880 Series Routers, see the “LEDs” section on page 1-30. Console or auxiliary port RJ-45 LAN switch 4-port 10/100BASE-T Hardware Description CiscoCisco800Series OKOKPOEOEPPPPPPFEFE4 WAN 01 VPN 012 3 FE FE LAN 361124 1 1LEDs
1-68 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overview Cisco 860, 880, 890 Series Figure 1-37 shows the back panel of the Cisco C881 Router. Figure 1-37 Back Panel of the Cisco C881 Router For information on installing the Cisco C880 Series Routers, see : http://www.cisco.com/en/US/docs/routers/access/800/860-880-890/hardware/installation/guide/2Instal l880-860.html Cisco C886VA Router Figure 1-38 shows the front panel of the Cisco C886VA Router. Figure 1-38 Front Panel of the Cisco C886VA Router For detailed description about the LEDs on the Cisco C880 Series Routers, see the “LEDs” section on page 1-30. 0 Cisco 881FE LAN 3210CONSOLE AUX FE WAN 4 12VDC 2 .5- 5 A(POE) RESET 361125 12345789 6 1Primary WAN port—FE6Reset button 2USB port7Power connector 3 4-port 10/100 Ethernet switch8Earth ground connection 4Serial port—Console or auxiliary9Kensington security slot 5 On/Off switch 361126 CiscoCisco800Series OKOKPOEOEPPPPPP FE FE LAN VPN 012 3 01 CD CD DATA xDSLxDSLISDNISDNLINKLINKB1B1B2B2 1 1LEDs
1-69 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overview Cisco 860, 880, 890 Series Figure 1-39 shows the back panel of the Cisco C886VA Router. Figure 1-39 Back Panel of the Cisco C886VA Router For information on installing Cisco C880 Series Routers, see: http://www.cisco.com/en/US/docs/routers/access/800/860-880-890/hardware/installation/guide/2Instal l880-860.html Cisco C886VAJ Router Figure 1-40 shows the front panel of the Cisco C886VAJ Router. Figure 1-40 Front Panel of the Cisco C886VAJ Router For detailed description about LEDs on the Cisco 880 Series Router, see the “LEDs” section on page 1-30. 361127 VDSL/ADSLVDSL/ADSL over ISDNover ISDN0 0 ISDNISDNFE LANFE LANCONSOLECONSOLE AUXAUX3210 12VDC2.2.5-5A-5A (POE)(POE)RESETRESET 2134568910 7 1Primary WAN port—VDSL/ADSL over ISDN6 On/Off switch 2USB port7Reset button 3ISDN8 Power connector 44-port 10/100 Ethernet switch9Earth ground connection 5Serial port—Console or auxiliary10Kensington security slot 361128 CiscoCisco800Series OKOKPOEOEPPPPPP FE FE LAN VPN 012 3 01 CD CD DATA xDSLxDSLISDNISDNLINKLINKB1B1B2B2 1 1LEDs
1-70 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overview Cisco 860, 880, 890 Series Figure 1-41 shows the back panel of the Cisco C886VAJ Router. Figure 1-41 Back Panel of the Cisco C886VAJ Router For information on installing Cisco C880 Series Routers, see: http://www.cisco.com/en/US/docs/routers/access/800/860-880-890/hardware/installation/guide/2Instal l880-860.html Cisco C887VA Router Figure 1-42 shows the front panel of the Cisco C887VA Router. Figure 1-42 Front Panel of the Cisco C887VA Router For detailed description about the LEDs on Cisco C880 Series Router, see the “LEDs” section on page 1-30. 361129 VDSL/ADSLVDSL/ADSL over ISDNover ISDN0 0 ISDN ISDNFE LANFE LANCONSOLECONSOLE AUXAUX3210 12VDC2.2.5-5A-5A (POE)(POE)RESETRESET 2134568910 7 1Primary WAN port—VDSL/ADSL over ISDN6 On/Off switch 2USB port7Reset button 3ISDN8Power connector 44-port 10/100 Ethernet switch9Earth ground connection 5Serial port—Console or auxiliary10Kensington security slot 361130 CiscoCisco800Series OKOKPOEOEPPPPPP FE FE LAN VPN 012 3 01 CD CD DATAxDSLxDSL 1 1LEDs