Corega Router Broadband Access Bar-SD User Manual
Have a look at the manual Corega Router Broadband Access Bar-SD User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1 Corega manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
19System Log The router supports two methods of system logging, syslog (UDP) and SMTP (TCP). •IP Address for Syslog:Host IP of destination where syslogs file will be sent. Check ‘Enable’to enable this function. •IP Address of Outgoing Mail Server:Input the IP Address of Outgoing Mail Server. For example, 192.168.1.100. •Log or Alert Recipient:The recipients who will receive these logs. Check ‘Enable’to enable Email alert (send syslog via email). Dynamic DNS •Disable / Enable:Select ‘Enable’to enable DDNS. •Provider:Enter the name of you Dynamic DNS provider. •Host Name:You can register a domain name to the DDNS provider. The fully domain name is concatenated with hostname (you specify) and a suffix (DDNS provider specifies). •Username / E-mail:This field is required by DDNS provider to authenticate its users. Input username or E-mail according to the DDNS provider. •Password / Key:This field is required by the DDNS provider. Input the password or key according to the DDNS provider. ENGLISH
SNMP •Enable SNMP :You must check either Local or Remote or both to enable the SNMP function. If Local is checked, this device will response request from LAN. If Remote is checked, this device will response request from WAN. Routing Only users with an excellent understanding of router protocols should attempt to change settings in this area. This may be required if you have more than one router on your LAN. Enter the information on the static routes in the following fields •Destination IP Address:Enter the IP Address of the destination LAN that the immediate LAN is to communicate with. •Subnet Mask:Enter the Subnet Mask of the destination LAN that the immediate LAN is to communicate with. •Gateway:Enter the IP Address of the router that forwards data packets to the destination LAN. ENGLISH 20
21Schedule Rule The Schedule Rule allows the time of day of tasks to be programmed. These Rules are used for example in allowing access to the website out of office hours. •Schedule Enable:Select if you want to Enable the Scheduler. •Edit:To edit the schedule rule. •Delete:To delete the schedule rule. •Add New Rule:Click Add New Rule to enter Schedule Rule Setting. View Log This allows users to see a log of events and actions performed by the Corega BAR-SD Router. Firmware Upgrade This allows the firmware of the router to be upgraded. 1. Use the “Browse” button to select the image upgrade file on the local computer. 2. Select the “Update” button. 3. Wait at least 1 minute for the router to upload the new image firmware, and re-boot itself. ENGLISH
Backup Settings This allows the configuration of the router to be saved on a local computer. Reset to Default Checking this box and then selecting “Apply” will restore the router back to the factory default settings. Reboot This allows the router to be reset, without changing any of the parameters programmed by the user. Miscellaneous •MAC Address for Wake-on-LAN:Wake-on-LAN is a technology that enables you to power up a networked device on the LAN ports remotely. Enter the MAC address of the device that should be woken, when the router receives a WOL packet. ENGLISH 22
23 Appendix A TCP/IP Protocol Installing Network Protocols Protocols are necessary for computers to be recognized on your network. Windows 2000 users need to check their Windows User Guides for protocol installation. Installing the Network Protocols for Windows 98 and Millennium 1. From the StartMenu, select Settingsand bring up the Control Panel. From the Control Panel, double-click on the Network icon. Note!Before adding any network protocols, verify that the protocol is not already installed. Never install duplicate protocols. 2. Select Corega BAR-SDfrom the list and click the Addbutton. ENGLISH
3. Highlight Protocoland click the Addbutton. 4. Select Microsoftfrom the list of “Manufacturers” and TCP/IPfrom the list of “Network” Protocols” and click the OKbutton to finish the installation. ENGLISH 24
25 Inhaltsverzeichniss Technische Daten26 Richtlinienkonformität 26 Funktionsmerkmale 27 Hardwareinstallation 28 Packungsinhalt28 Statusanzeigen an der Frontseite 28 Anschlüsse an der Rückseite 29 Vor dem Anschluss Ihres Corega BAR-SD 29 Systemvoraussetzungen und Setup 30 Installation des Corega BAR-SD Routers 30 Internet Zugang31 Benötigte Netzwerkinformationen 31 Web basiertes Benutzerinterface 35 Grundeinstellungen35 PPPoE35 Dynamische IP-Adresse 36 Dynamische IP-Adresse (Road Runner) 36 Statische IP-Adresse36 PPTP37 DHCP Server37 Passwort ändern38 Nach außen hin sichtbarer Server 38 Anwendungen39 Sonstige Einstellungen39 Paket Filter40 Domain Filter40 Blockieren von URL’s41 Kontrolle von MAC Adressen 41 Sonstiges (Login aus der Ferne) 42 Systemzeit42 System Log43 Dynamischer DNS43 SNMP44 Routing44 Regeln für den Zeitplan 45 View Log45 Firmware Upgrade45 Einstellungen sichern46 Zurücksetzen auf Werkseinstellungen 46 Reboot46 Sonstiges (Wake on LAN) 46 Anhang A: TCP/IP Protokoll 47 DEUTSCH
DEUTSCH 26 Schnittstellen WAN-Port. 10/100BaseTX Fast Ethernet, (Auto MDI) LAN Ports 4 x 10/100BaseTX Fast Ethernet (Auto MDI) Anzeigen Stromversorgung (Grün) Status (Gelb) WANVerbindung/Aktivität (Grün) Verbindungs- und Aktivitätsanzeige 100M (Grün) Port-Geschwindigkeit von 10 oder 100Mbps LAN (pro Port) Verbindung/Aktivität (Grün) Verbindungs- und Aktivitätsanzeige 100M (Grün) Port-Geschwindigkeit von 10 oder 100Mbps Abmessungen 153mm x 112.4mm x 31mmGewicht 230g Stromversorgung Eingang: 220–250VAC Ausgang: 5V=, 2A Temperatur und Luftfeuchtigkeit Betrieb: 0 – 40°C,
27 DEUTSCH Funktionsmerkmale Ihr Corega BAR SW-SD Router bietet die folgenden Funktionsmerkmale: • Simultaner Multi-Benutzer-Internetzugriff über eine einzige öffentliche IP-Adresse unter Verwendung von NAT (Network Address Translation). •Integrierte Stateful Inspection Firewall zum Schutz Ihrer PCs gegen externe Angriffe. • Integrierter 4-Port-10/100Base-TX-Switch (automatische Erkennung). • Unterstützung von PPPoE zur Nutzung einer DFÜ-Schnittstelle (z.B. ADSL-Internetzugang) durch mehrere Benutzer. • Unterstützung von PPTP zur Nutzung einer DFÜ-Schnittstelle (z.B. ADSL-Internetzugang) durch mehrere Benutzer. • Integrierte, web-basierte Benutzeroberfläche mit leicht verwendbaren Konfigurations- und Managementfunktionen • DHCP-Unterstützung für die Verwendung einer vom ISP dynamisch zugewiesenen IP-Adresse. • Integrierter DHCP-Server für die automatische Zuweisung und Verwaltung von LAN-IP-Adressen. • Virtueller Server für den optionalen Zugriff externer Internet-Benutzer auf ein internes Host-System. • Uneingeschränkte bidirektionale Kommunikation zwischen einem PC in Ihrem LAN und bestimmten Interdiensten wie Konferenz- und Video-Anwendungen sowie Spielen. • Unterstützt UPnP. • Unterstützt SNMP-Management.
Hardwareinstallation Dieses Kapitel beschreibt den Lieferumfang, die generellen Gerätefunktionen und die Hardwareinstallation des Corega BAR-SD-Routers. Packungsinhalt 1 x Corega BAR-SD Router 1 x Externer Stromadapter 1 x Ethernet-Kabel 1 x Installationsanleitung Statusanzeigen an der Frontseite Die folgende Abbildung zeigt die Vorderansicht des Corega BAR-SD Routers. PowerGrün Leuchtet bei eingeschalteter Stromversorgung permanent auf. StatusOrange Blinkt beim normalen Betrieb. WAN (WAN port) Link/Act Grün SLeuchtet permanent auf, wenn das ADSL-/Kabelmodem korrekt angeschlossen ist. Blinkt, wenn Daten über den WAN-Port übertragen werden. 100M Grün Leuchtet permanent auf, wenn eine 100Mbps-Verbindung am WAN-Port vorhanden ist. Erlischt, wenn eine 10Mbps-Verbindung am WAN-Port vorhanden ist. LAN (LAN ports) Link/Act Grün Leuchtet permanent auf, wenn der LAN-Port korrekt angeschlossen ist. Blinkt, wenn Daten über den LAN-Port übertragen werden. 100M Grün Leuchtet permanent auf, wenn eine 100Mbps-Verbindung am LAN-Port vorhanden ist. Erlischt, wenn eine 10Mbps-Verbindung am LAN-Port vorhanden ist.DEUTSCH 28 1 Power BAR SD Broad band Access RouterStatus Link /Act WAN100M 2 34 LAN