Electrolux Ewm 147410 W User Manual

user manual
benutzerinformation
Washing Machine - Drying Board
Waschmaschine - Trockenablage
CALIMA
EWM 147410 W
 

Electrolux. Thinking of you.
Share more of our thinking at www.electrolux.com
CONTENTS
Safety information    2
Product description    4
Control panel    5
First use    8
Personalisation    8
Daily use    8
Drying Board - How to dry    11
Helpful hints and tips    14Washing programmes    16
Care and cleaning    19
What to do if...    23
Technical data    26
Consumption values    26
Installation    27
Electrical connection    30
Environment concerns    30
Subject to change without notice
 SAFETY...

• When unpacking the appliance, check
that it is not damaged. If in doubt, do not
use it and contact the Service Centre.
• All packing and transit bolts must be re-
moved before use. Serious damage can
occur to the product and to property if
this is not adhered to. See relevant sec-
tion in the user manual.
• After having installed the appliance,
check that it is not standing on the inlet
and drain hose and the worktop is not
pressing the electrical supply cable
against the wall.
• If the machine is...

PRODUCT DESCRIPTION
Your new appliance meets all modern requirements for effective treatment of laundry
with low water, energy and detergent consumption. Its new washing system allows to-
tal use of detergent and reduces water consumption so saving energy.
12
3
4
5
6
 92 mm
87
1Detergent dispenser drawer
2Control panel
3Door opening handle
4Rating Plate
5Drain pump
6Adjustable feet
7Drying top
8Extractable shelf
 
Calima - The Drying Top
Your appliance is integrated with an easy to use drying top...

Detergent dispenser drawer
 Compartment for detergent used for pre-
wash and soak phase or for stain remover
used during the stain action phase (if availa-
ble). The prewash and soak detergent is
added at the beginning of the wash pro-
gramme. The stain remover is added dur-
ing the stain action phase.
 Compartment for powder or liquid deter-
gent used for main wash. If using liquid de-
tergent pour it just before starting the pro-
gramme.
 Compartment for liquid additives (fabric
softener, starch)....

9DOOR LOCKED pilot light10TIME MANAGER buttons
Table of symbols
= Cold Wash
= Rinse Hold
= Door locked
= Child Lock
Programme Selector Dial
It allows you to switch the appliance on/off
and/or to select a programme.
Temperature
This button allows you to increase or de-
crease the washing temperature.
Spin
By pressing this button you can change the
spin speed of the selected programme or
to select Rinse Hold option.
Rinse hold
By selecting this function the water of the
last rinse is not emptied out to...

Display
7.47.57.1
7.27.3
The display shows the following information:
7.1:
•Duration of the selected programme
After selecting a programme, the duration
is displayed in hours and minutes (for ex-
ample 2.05  ). The duration is calculated
automatically on the basis of the maxi-
mum recommended load for each type of
fabric. After the programme has started,
the time remaining is updated every mi-
nute.
•Delayed start
The Selected delay set by pressing the rel-
evant button appears on the display for
few...

FIRST USE
• Ensure that the electrical and water
connections comply with the installa-
tion instructions.
• Remove the polystyrene block and
any material from the drum.
• Pour 2 litres of water into the main
wash compartment 
 of the deter-
gent drawer in order to activate theECO valve. Then run a cotton cycle
at the highest temperature without
any laundry in the machine, to re-
move any manufacturing residue
from the drum and tub. Pour 1/2 a
measure of detergent into the main
wash compartment and start...

If required, pour fabric softener into the com-
partment marked 
 (the amount used
must not exceed the «MAX» mark in the
drawer). Close the drawer gently.
Select the required programme by
turning the programme selector dial (1)
Turn the programme selector dial to the re-
quired programme. The washing machine
will propose a temperature and automatical-
ly select the maximum spin value provided
for the programme you have chosen. You
can change these values by operating the
corresponding buttons. The green...

For compatibility among the washing
programmes and the options see chap-
ter «Washing Programmes».
Select the Delay Start by pressing
button 6
Before you start the programme, if you wish
to delay the start, press the button 6 repeat-
edly, to select the desired delay. The rele-
vant pilot light goes on.
The selected delay time value (up to 20
hours) will appear on the display a few sec-
onds, then the duration of the programme
will appear again.
You must select this option after you have
set the...