Kyocera FS 1028DP User Manual
Have a look at the manual Kyocera FS 1028DP User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 73 Kyocera manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
KPDL Operators 7-139 keys to the CollateDetails parameter should have the following integer values depending on the mode of each e-MPS function. Examples : To post a print job into the virtual mailbox aliased Robert, a typical CollateDetails sequence of parameters will be as follows: setpagedevice KPDL Error Messages Depending on the setting of the doautocontinue parameter, the printing systems having the operator display display errors occurring during operation in the KPDL mode as fol- lows. Any of the following error codes will appear if errors occur and doautocontinue is set to false. When doautocontinue is set to true, only error code s 00 and 98 are available. These error codes are also reported from the printer to the computer. Some software will dis- play these error names on the computer screen. Table 7.51. Enabling e-MPS Functions e-MPS /Collate /CollateDetails > /Mode /Type /Hold /Hold- Ty p e/HoldKey Electronic sorting true 0 0 Temporary job storage true 1 Permanent job storage true 2 Virtual mailbox true 8 QuickCopy true0810 QuickCopy (Private)true0811(1234) Proof and Hold true 0 8 3 Stored job true0820 Stored job—PIN securedtrue0821(1234) KPDL Error ## .. Press ON LINE Table 7.52. KPDL Error Messages Code Error Meaning 00 Cannot initiate KPDL 01 dictfull Dictionary full; no new entries can be added 02 dictstackoverflow Too many begins 03 dictstackunderflow Too many ends 04 execstackoverflow Execution st ack nesting depth exceeded 250 05 handle Name of error-reporting procedure 06 interrupt Control-C was received 07 invalidaccess Attempted violation of access attribute 08 invalidexit Exit not enclosed in any loop 09 invalidfile Invalid access string for file operator 10 invalidfont Invalid font name or invalid font dictionary format 11 invalidrestore Restore would destroy composite object created after save Downloaded From ManualsPrinter.com Manuals
Chapter 7 Emulation 7-140 KPDL Printable Area This printing system does not quite print to the edges of the paper. The edge limits of the printable area vary depending on the paper type as determined by the paper type KPDL operator. The edge limits are located as shown in the following figure and table. They adjust automatically to the size of the paper cassette (although not to the size of manually fed paper). 12 ioerror Input/output error 13 limitcheck Path too co mplex, more than 6 files open, etc. 14 nocurrentpoint No current point is defined 15 rangecheck Operand out of allowed range 16 stackoverflow Operand stack overflow 17 stackunderflow Operand stack underflow 18 syntaxerror Syntax error in program 19 timeout Time limit exceeded 20 typecheck Wrong type of operand 21 undefined Name not found in dictionary 22 undefinedfilename File cannot be found 23 undefinedresult Overflow, underflow, or meaningless result 24 unmatchedmark Expected mark not found on stack 25 unregister Internal error 26 vmerror Virtual memory is exhausted, or illegal access was attempted 27 badpassword Bad password 28 invalidnumber Invalid number 29 nomemory Memory unavailable 30 configurationerror Setpagedevice request cannot be satisfied 31 invalidcontext Improper use of context operation 32 invalidid Invalid identifie r for external object 33 undefinedresource Resource instance not found 98 fatal Fatal error (User memory exhausted) Table 7.52. KPDL Error Messages Code ErrorMeaning Downloaded From ManualsPrinter.com Manuals
KPDL Operators 7-141 Figure 7. 53. Printable Area Table 7.54. Paper Sizes and Printable Area Paper type Paper sizeEdge limits (A above) Printable area (B above) Horizontal Vertical cm Points cm Pt. cm Pt. cm Pt. A3 a a For A3/ledger models. 29.7 x 42.0 842 x 1191 0.42 12 0.35 10 28.85 x 41.31 818 x 1171 B4 a25.7 x 36.4 728 x 1032 0.42 12 0.35 10 24.83 x 35.70 704 x 1012 A4 21.0 x 29.7 595 x 842 0.42 12 0.35 10 20.14 x 28.99 571 x 822 A4 Small 21.0 x 29.7 595 x 842 0.875 25 0.875 25 19.22 x 27.94 545 x 792 A5 14.8 x 21.0 421 x 595 0.42 12 0.35 10 14 x 20.28 397 x 575 A6 10.5 x 14.8 297 x 421 0.42 12 0.35 10 9.63 x 14.14 273 x 401 B5 18.2 x 25.7 516 x 729 0.74 21 0.35 10 16.72 x 25.01 474 x 709 B6 12.8 x 18.2 364 x 516 0.42 12 0.35 10 11.99 x 17.49 340 x 496 Int’l DL 11.0 x 22.0 312 x 624 0.42 12 0.35 10 10.16 x 21.3 288 x 604 Int’l B5 17.6 x 25.0 499 x 708 0.42 12 0.42 12 16.75 x 24.13 475 x 684 Int’l C4 a22.9 x 32.4 649 x 919 0.42 12 0.35 10 22.0 x 31.7 625 x 899 Int’l C5 16.2 x 22.9 459 x 649 0.42 12 0.35 10 15.34 x 22.18 435 x 629 Double-postcard 14.8 x 20.0 421 x 595 b b For A4/letter models. 0.42 12 0.49 14 14.00 x 20.00 397 x 567 420 x 567 a0.35 10 0.35 10 14.11 x 19.30 400 x 547 Postcard 10 x 14.8 297 x 421b0.46 13 0.35 10 9.56 x 14.14 271 x 401 283 x 420a0.35 10 0.35 10 9.28 x 14.11 263 x 400 Ledgera11 x 17 792 x 1224 0.16 12 0.11 8 10.68 x 16.78 768 x 1208 Legal 8.5 x 14 612 x 1008 0.16 12 0.11 8 8.18 x 13.78 588 x 992 Letter 8.5 x 11 612 x 792 0.16 12 0.11 8 8.18 x 10.78 588 x 776 Ltr Small 8.5 x 11 612 x 792 0.35 25 0.35 25 7.8 x 10.3 562 x 742 Executive 7.25 x 10.5 522 x 756 0.16 12 0.11 8 6.93 x 10.28 498 x 740 Com. #10 4.125 x 9.5 297 x 684 0.16 12 0.11 8 3.79 x 9.28 273 x 668 Monarch 3.875 x 7.5 279 x 540 0.16 12 0.11 8 3.555 x 7.28 255 x 524 Com. #6 3.625 x 6.5 261 x 468 0.16 12 0.11 8 3.29 x 6.28 237 x 452 Com. #9 3.875 x 8.875 279 x 639 0.16 12 0.11 8 3.54 x 8.666 255 x 623 Custom a11.7 x 17.7 842 x 1274 0.11 8 0.11 8 11.47 x 17.47 826 x 1258 Downloaded From ManualsPrinter.com Manuals
7-142 This page is left blank intentionally. Downloaded From ManualsPrinter.com Manuals
i Index Numerics 16-bit word, 4-13 A Absolute coordinates , 2-19 Absolute position, 2-2 Arc, 2-10 path mode drawing , 2-24 B Baseline , 1-8 Beveled line join , 2-21 Bézier curve, 2-26 Binary number, 2-13, 4-13 Bit image, 2-34 Bitmap font , 4-6 Bitmap fonts , 1-6, 4-6 block, 2-10 Box, 2-6 Butt cap , 2-20 C Cartesian (X,Y) coordinates , 2-5 Case, 1-12 exception , 1-13 Cassette size , 1-4 Character cells , 1-8 Character path, 2-33 Character set KC-GL , 7-96 Character spacing , 1-8 Character string, 1-11 Check digit, 5-2 Circle, 2-9 Clipping a path , 2-16 Clipping path, 2-32 basic concept, 1-9 Clipping rectangle, 2-32 Closed path, 2-29 Command name , 1-4 Command parameter angle parameter , 1-11 character string, 1-11 numeric parameter, 1-10 special parameters , 1-13 Complex curves, 2-26 Compressing raster data , 2-34 Compression (SFNT), 4-8 Control byte, 2-34 Control codes Diablo 630 , 7-14 Epson LQ-850 , 7-24 HP LaserJet series , 7-49 IBM Proprinter, 7-6 Coordinates, 1-7, 1-9, 2-2 Creating new symbols , 4-12 Current path, 2-18 Current position , 1-7 Cursor, 1-7 Cursor position , 2-2 Curved line, 2-16 Curves drawing in path mode , 2-24 D Dash pattern , 2-23 defining, 2-23 user defined , 2-23 Dash type, 2-22 Dashed line, 2-22 Decimal place , 1-11 Default font, 4-2 Destination image , 2-37 Diablo 630 character set , 7-16 control code, 7-14 emulation, 7-12 Dot resolution , 2-34, 2-36 Double-high printing, 7-5 Double-strike printing, 7-5 Double-wide fonts, 7-21 Double-wide printing , 7-5 Downloadable font, 4-2 Dummy parameter, 3-3 Dummy sign (macro) , 3-2 E EAN barcode , 5-4 Edge limits, 1-4, 2-32 Emulation, 7-1 general, 7-3 selection, 7-2 transmission , 1-2 Ending angle, 2-24 Entry and Exit , 1-2 Epson LQ-850 character set , 7-26 Downloaded From ManualsPrinter.com Manuals
ii control codes, 7-24 emulation, 7-21 Even-odd rule (FILL) , 2-32 F Fill pattern , 2-10 defining, 2-12 Filled area , 1-9, 2-30 Filled block , 2-10 Flag, 5-2 Flatness of curves , 2-28 Font characteristics , 4-9 definition, 4-2 identifying characteristics , 4-1 selection, 4-7 Font mode, 4-10, 7-22 Font name, 4-6 Font number assigning to a scalable font (SFNT) , 4-8 Font orientation, 4-9 Font selection, 4-7, 7-35 by embedded software commands , 4-12 by PRESCRIBE, 4-7 font selection commands , 4-7 priority, 4-9 Font selection command placement in a file , 4-11 Footnote, 4-11 FRPO parameters , 6-1 G Graphics state , 2-39 Gray scale, 2-16, 2-29, 2-30 H HP LaserJet series character set , 7-67 emulation, 7-33 font selection , 7-35 printer commands , 7-49 HP PCL language , 1-13 HP-GL/2 language , 1-6 printer commands , 7-64 Human-readable text (barcode) , 5-3 Human-readable text (macro), 5-2 I IBM Proprinter character set , 7-9 control codes , 7-6 emulation, 7-4 Imaging model , 2-37 International characters KC-GL , 7-109 K KC-GL character sets , 7-107 coordinates, 7-98 default status , 7-114 device control , 7-106 emulation, 7-96 instruction format, 7-96 instructions (table) , 7-111 modes A and B, 7-98 parameter format, 7-97 pen selection, 7-99 status information , 7-102 KPDL, 4-4, 7-115 L Line drawing , 2-2 path mode , 2-18 Line end (caps) , 2-20 Line join, 2-21 Line join mode , 2-21 Line printer emulation , 7-3 Line width, 2-2 Line-cap mode, 2-20 Lines, 2-2 relative , 2-4 zero-relative, 2-3 Logical page , 1-9 M Margins , 1-4, 1-6, 2-2 Memory card , 4-2 Miter limit, 2-21 values, 2-22 Mitered line join , 2-21 MSI barcode, 5-2 N Native language , 1-1 Notched line join , 2-21 Downloaded From ManualsPrinter.com Manuals
iii O Origin, 1-7 P Page direction , 1-5 Page orientation , 1-5 Path mode graphics , 2-16 Pattern number, 2-22, 2-24 Permanent parameters , 6-1 Physical page, 1-9 Pie charts, 2-14 Plotter units , 7-100 PRESCRIBE command length limit , 1-4 format, 1-4 Presentation mode , 2-36 Print direction, 1-6 Print model, 2-1 Proportional fonts , 1-8 Proportional spacing , 1-8 Q Quotation marks , 1-11 R Radius , 2-9, 2-15 Raster data in taggged image file format , 2-34 printing commands, 2-35 run-length compressed , 2-34, 7-35 uncompressed, 2-34 Raster graphics, 2-34 compression formats , 2-34 Real number (KC-GL) , 7-97 Relative coordinates, 2-19 Resident fonts, 4-2 Roman Extension , 7-33 Roman-8, 7-33, 7-37 Roman-8 symbol set, 4-8 Round cap , 2-20 Round line join , 2-21 Row-work, 2-13 S Scalable font , 4-2 assiging a font number to , 4-8 lists, 4-2 outline , 4-2 Scaled real number (KC-GL) , 7-97 Scaling point (KC-GL), 7-101 Short and tall parameters (barcode), 5-3 Soft fonts, 4-2 Source image, 2-37 Spacing commands , 4-10 Square cap, 2-20 Standard graphics mode , 2-2 Standard mode and path mode logical page , 1-9 Starting angle, 2-15, 2-24 Stroking a path , 2-16 Subpath, 2-17 basic concept , 1-9 Superscripts & subscripts , 7-5 Symbol set default selection , 7-37 Symbol set (SFNT) , 4-8 T Tagged image file format (TIFF) , 2-34, 7-35 Text positioning, 1-7 Thickness of lines , 2-3 Tilt (SFNT), 4-8 Transparency mode, 2-37 Two’s comlement (TIFF) , 2-35 Typeface, 4-1 U Unprintable area , 2-2 Upper and lowercase letters , 1-12 US ASCII, 7-3, 7-33 US Legal, 7-3 User unit (KC-GL) , 7-100 USPS (barcode), 5-2 W Word-processing software , 1-5, 4-12, 7-1 X X/Y (coordinates) , 1-7 Z Zero-relative coordinates , 2-24 Downloaded From ManualsPrinter.com Manuals
Rev. 4.7 2009.7 Downloaded From ManualsPrinter.com Manuals