OKI B4350n User Manual

							PAPER RECOMMENDATIONS > 41
3. Start the Status Monitor.
4. Click on [Printer Setup] tab - [Printer Menu] button - [Paper tab] - 
[Manual Feed] button. Adjust the media type to Transparency and 
the paper size to the size of the transparency being used.
5. Click on the [Apply] button, [Close] button then [OK] button to 
set the printer for transparencies.
NOTE
Remember to reset the printer for normal paper after printing transparencies.
Downloaded From ManualsPrinter.com Manuals 
						

							PAPER RECOMMENDATIONS > 42
B4350, B4350n
Using the control panel on your printer, you can choose:
> which paper to use
> the size of the paper you wish to use
> the weight of the paper (thickness)
> the type of paper
Paper feed selection
The paper feed, paper size, paper weight and media type can be set 
manually on the printer using the control panel as follows.
1. Press the Online button to return the printer to offline status.
2. Press the Menu button repeatedly until PRINT MENU is 
displayed, then press the Select button.
3. Press the Item button until the required paper feed is displayed.
4. Press the Select button. A plus (+) appears next to the selected 
paper feed.
NOTE
> If the settings in the printer differ from those selected on your computer, 
the printer will not print and the LCD will display an error message.
> The following printer settings are given as a guide only. Some software 
applications require the paper feed, size and media settings to be 
selected from within the application (page setup).
> Although media properties can be set in the printer driver for particular 
jobs, it is recommended that when filling a tray with media you 
manually set the printer to match the media as described here.
NOTE
When the AUTO TRAY SWITCH is set to ON and more than one paper tray 
is installed, paper feed automatically switches to the next available paper 
tray, providing non-stop printing.
Downloaded From ManualsPrinter.com Manuals 
						

							PAPER RECOMMENDATIONS > 43
Paper size
Set the paper size as follows.
1. Press the Online button to return the printer to offline status.
2. Press the Menu button until PRINT MENU is displayed, then 
press the Select button.
3. Press either Item (+) or (–) button repeatedly until EDIT SIZE is 
displayed.
4. Press either Value (+) or (–) button until the required paper size is 
displayed, then press the Select button. A plus (+) appears next to 
the selected paper size.
5. Press the Online button to return the printer to ONLINE status.
6. Select the correct paper settings in the printer driver before 
printing the file.
Media type and weight
Set media type and weight as follows:
1. Press the Online button to return the printer to off-line status.
2. Press the Menu button until MEDIA MENU is displayed, then 
press the Select button.
3. Press the Item (+) or (–) button until MEDIA TYPE or MEDIA 
WEIGHT for the required tray is displayed.
NOTE
> When using paper trays, standard paper sizes are recognized 
automatically with CASSETTE SIZE (default setting) selected. Paper 
size need only be set for custom paper sizes.
> When using the manual feed tray, the paper size has to be selected.
CAUTION!
If media type or media weight are not correctly set, print quality 
deteriorates and the fuser roller may be damaged.
Downloaded From ManualsPrinter.com Manuals 
						

							PAPER RECOMMENDATIONS > 44
4. Press the Value (+) or (–) button until the required paper type or 
weight is displayed, then press the Select button. A plus (+) 
appears next to the selected paper type or weight.
5. Press the Online button to return the printer back to online status.
Select the correct paper settings in the printer driver before printing the 
file.
Downloaded From ManualsPrinter.com Manuals 
						

							INTERFACES > 45
INTERFACES
Your printer is equipped with a selection of data interfaces:
1. Parallel – (not available on the B4100) For direct connection to a 
PC. This port requires a bi-directional (IEEE 1384 compliant) 
parallel cable.
2. USB – For connection to a PC running Windows 98 or above (not 
Windows 95 upgraded to Windows 98) or Macintosh. This port 
requires a cable conforming to USB version 1.1 or above.
The operation of a printer is not assured if a USB-compatible 
device is connected concurrently with other USB-compatible 
machines.
When connecting multiple printers of the same type, they appear 
as *****, ***** (2), ***** (3), etc. These numbers depend on the 
order of connecting or turning on each printer.
3. Serial – for direct connection to a device that uses serial printing 
(available as an option only on the B4350, and B4350n). Note: 
cannot be used with the Ethernet card.
4. Ethernet – For network cable connection; standard on the 
B4350n. (available as an option on the B4350)
5. If you are connecting your printer directly to a standalone 
computer proceed to the chapter entitled “Printer Drivers.”
If your printer is to be installed as a network printer, please refer to the 
User’s Guide for the network interface card for further details on how to 
configure the network connection before installing the printer drivers.
NOTE
Administrator’s authority is required when installing a network connection.
Downloaded From ManualsPrinter.com Manuals 
						

							PRINTER DRIVERS > 46
PRINTER DRIVERS
This chapter describes how to install a printer driver on two types of 
operating system – Windows, and Macintosh (B4350 models only).
The printer drivers are all contained on the printer driver CD-ROM. 
Please refer to the readme file on this CD for the latest information on 
printer driver installation.
WINDOWS OPERATING SYSTEMS
>  Install the printer driver using The Menu Installer on the CD-ROM 
included with your printer.  
1.  Insert the printer driver CD-ROM supplied with your printer into 
your CD-ROM drive. The CD will autorun. (If it doesn’t, click 
[Start] - [Run] - [Browse]. Browse to your CD-ROM driver and 
double-click Install.exe, click OK.
2.  The Licence Agreement appears. Click Next if you accept the 
terms.
3. Select your language.
4. Select the printer model. Click Continue.
5. The Software Installation screen appears.Click the Printer Driver 
Installer button.
6. Follow the on-screen prompts to complete your printer driver 
installation.
NOTE
For information specific to a network installation, see the Network User 
Guide on the CD-ROM supplied with your printer. Click the 
Documentation/Network User’s Guide buttons in the Menu Installer.
NOTE
For step by step instructions, see the Software Installation Guide included  
with your printer.
Downloaded From ManualsPrinter.com Manuals 
						

							PRINTER DRIVERS > 47
INSTALL THE STATUS MONITOR FOR B4100 AND 
B4250 PRINTERS
1. Click the Sta tus Mo nitor button on the Menu Installer Screen.
2. Follow the instructions to complete the installation.
INSTALLED OPTIONS
Certain options may have been installed in your printer. For those that are 
installed, check that they appear enabled on the Menu Map (See 
“Confirming current settings” in “Operator Panels”.) 
Ensure that your options are set up in the printer driver(s) by making the 
appropriate settings on the Device Options tab (PCL emulation) and/or 
Device Settings tab (PS emulation) described in the “Operation.” chapter. 
MACINTOSH OS 9.1+ 
INSTALL THE DRIVER
1. Turn on the printer, then turn on the computer.
2. Place the Drivers CD supplied with the printer in the CD-ROM drive.
3. Double-click the CD icon that appears on the desktop.
4. Open the MAC folder. Double-click PCLDR.
5. Double-click your language.
6. Double-click the OKI B4350 Mac Installer icon, then click 
Continue and accept the License agreement.
7. Select Mac OS9.1+ Install from the drop-down menu located in 
the left corner. Click Install.
8. When the installation is complete, click Quit.
ADDING THE PRINTER FOR USB
1. Activate Chooser from the Apple menu.
2. Select the B4350USB icon.
3. Highlight the printer model. Close Chooser.
Downloaded From ManualsPrinter.com Manuals 
						

							PRINTER DRIVERS > 48
MACINTOSH OS X.1+ 
INSTALL THE DRIVER
1. Turn on the printer, then turn on the computer.
2. Place the Drivers CD supplied with the printer in the CD-ROM drive.
3. Double-click the CD icon that appears on the desktop.
4. Open the MAC folder. Double-click PCLDRV.
5. Double-click your language.
6. Double-click the OKI B4350 Mac Installer icon, then click 
Continue and accept the License agreement.
7. Select Custom Install from the drop-down menu located in the 
left corner. Click Install.
8. Check PCL Driver for MAC OS X.1+. Click Install.
9. When the installation is complete, click Quit.
ADDING THE PRINTER FOR USB
1. Run the Print Center (Local HD → Applications →Utilities →  
Print Center).
2. Click Printers from the menu bar. Click Add Printer.
3. Select OKI USB from the drop down menu.
4. Highlight your printer model from the product list. Click Add.
5. Close the Print Center.
ADDING THE PRINTER FOR A NETWORK
1. Run the Print Center (Local HD → Applications →Utilities →  
Print Center).
2. Click Printer from the menu bar. Click Add Printer.
3. Select OKI TCP/IP from the drop down menu. 
4. Enter the IP Address.
5. Highlight your printer model. Click Add. Close the Print Center.
Downloaded From ManualsPrinter.com Manuals 
						

							OPERATION > 49
OPERATION
This chapter provides a broad outline of how to operate your printer from 
either a Windows or a Macintosh environment. In the Windows 
environment, PCL emulation is available on the B4250, B4350 and 
B4350n printer models. PS is available as on option an the B4350 and 
B4350n models. 
PRINTER SETTINGS IN WINDOWS
The operator panel controlled menus and Status Monitor controlled 
menus (described in the chapter entitled “Operator panels”) provide 
access to many options.
The Windows printer driver also contains settings for many of these items. 
Where items in the printer driver are the same as those in the operator 
panel and Status Monitor menus, and you print documents from 
Windows, the settings in the Windows printer driver will override those 
settings in the operator panel and Status Monitor menus.
PRINTING PREFERENCES IN WINDOWS 
APPLICATIONS
When you choose to print your document from a Windows application 
program a Print dialogue box appears. This dialogue usually specifies the 
name of the printer on which you will print your document. Next to the 
printer name is a Properties button.
When you click Properties a new window opens which contains a short 
list of the printer settings available in the driver, which you can choose for 
this document. The settings available from within your application are 
only those which you may want to change for specific applications or 
documents. Settings you change here will usually only last for as long as 
the particular application program is running.
NOTE
The illustrations in this guide relate to Windows 2000 PCL and PS 
emulations – other operating system windows may appear slightly different 
but the principles are the same.
Downloaded From ManualsPrinter.com Manuals 
						

							OPERATION > 50
PCL emulation
The tabs available are the Setup Tab, the Job Options Tab and the Image 
Tab.
Setup tab.
1. Paper size should be the same as the page size of your document 
(unless you wish to scale the printout to fit another size), and 
should also be the same as the size of paper you will feed into the 
printer.
2. You can choose the source of the paper to feed, which may be 
Tray 1 (the standard paper tray), Manual Feed, or Tray 2 (if you 
have the optional second paper tray installed). You can also click 
on the appropriate part of the screen graphic to select your 
preferred tray.
If you select manual, the Weight selection box becomes visible. 
You can leave the setting at Printer Setting or select as required.
3. A variety of document finishing options can be selected, such as 
normal one page per sheet, or N-up (where N can be 2 or 4) for 
printing scaled down pages at more than one page per sheet.
Downloaded From ManualsPrinter.com Manuals