Panasonic Combination 15.2" Diagonal Lcd Tv Dvd Player Tc 15lv1 Operating Instructions

							51
GUI screen reference chart
Title no. (DVD)Track no. (CD, video CD)
Chapter no. 
(DVD)
Elapsed time 
(DVD)
Time display 
(CD, video CD)
Audio information 
(DVD)
Audio mode 
switching (Video CD)
Subtitle no. 
(DVD)
Playback control 
(Video CD)
Angle no.When you select a no. and press [Set], playback of that title/track begins. 
(Selection can also be made using the numerical buttons)
When you select a no. and press [Set], playback of that chapter beings. 
(Selection can also be made using the numerical buttons)
If you designate the time for starting playback with the numerical buttons, 
playback begins from that time.
Example: To start playback after 1 hour, 6 minutes and 37 seconds,
                
    ➡     ➡     ➡     ➡     ➡ press [Set].
During playback, this changes the display each time [    ] or [    ] is pressed.
When a no. is selected, playback begins with that audio.
(1) Audio language allocated to no. (See page 49)
(2) Audio attributes allocated to no. (See page 49)
When a channel is selected, playback is done with that audio.
When a no. is selected, subtitles are displayed in that language.
(1) Subtitle language allocated to no. (See page 49)
(2) Select subtitle On or Off.
This displays the On Off state of menu playback. (Content cannot be 
changed).
When a no. is selected, playback is seen from that angle.
Repeat 
playback 
between 
A and B
Repeat 
playbackPlayback is repeated between the designated 2 points. Each time [Set] is 
pressed during playback, the setting cycles are as indicated below.
 • This is only possible in the same chapter (same title if there are no chapter 
divisions) (DVD), or the same track (video CD, music CD). 
 • If the chapter(title)/track ends before the end point B is designated, the start 
point A is cancelled.
When the playback type is selected, repeat playback begins.
• For DVD                                            • For CD, video CD
Sound field
Random playback 
(CD)When sound quality is selected, playback is heard with that effect.
NORMAL:  Normal sound quality
LIVE:  Sound quality like a live performance
MOVIE:  Sound quality like a movie theater
CONCERT:  Sound quality like a concert hall
 • Selection cannot be done with DTS/DTS CD.
 • With a video CD, selection is only possible when the audio mode is LR.
Select On Off for random setting.
 If On is selected, random playback is used for playback.
02 12
02 05
00 00 00
120
OFF
12
OFF
NORMAL
AB
(1) (2)
(1) (2)
ON
ON
Disk information screen
Information screen for this device
Audio attributes
 • LPCM /       Digital / DTS :Signal type     • k :Sampling frequency     • b :Number of bits     • ch :Number of channels
(Chapter)   (Title)   (Normal playback)OFF(Track)   (Entire disc)  (Normal playback)OFF
Designate A point Designate B point
(A–B repeat playback begins)Return to normal playback
 Track elapsed time  Track remaining time  Disc remaining time 
						

							52
DISPLAY
ANGLE
PAUSE
ASPECT
TV/VIDEO MUTE
SLEEPCHVOL
SURROUND
CANCEL
REPEAT MODE A-B REPEATPLAY MODE
R-TUNE
ENTER
RETURN
PLAY
DVD
MENU
TOP MENU
STOP
SKIP
TV      
MENU
SLOW/SEARCH
OPEN
CLOSE
POWER
Once the intial settings have been completed, the player can always be
operated under the same conditions (especially DVDs).
The settings will be retained in the memory, until the settings are changed,
even after switching to standby mode.
Initial settings
1
Press TV MENU to display menu screen during stop mode.
2Press SELECT (  ,  ) button to select SET UP.
3Press SELECT (  ,  ) button to select DVD SET UP, and press
ENTER.
Press SELECT ( 
 , ,  ,  ) button to select the menu setup.
Each screen for setting the value is displayed.
MENU
ADJUSTSET  UP
LANGUAGE
PROGRAM  CH
DVD  SET  UP
LOCK
CLOSED CAPTION
INPUT  LABEL
OTHER  ADJUST
RETURNENTER
SELECTPAGE
MENU
ADJUSTSET  UP
LANGUAGE
PROGRAM  CH
DVD  SET  UP
LOCK
CLOSED CAPTION
INPUT  LABEL
OTHER  ADJUST
RETURNENTER
SELECTPAGE
ENGLISH
ENGLISH
ENGLISH
LEVEL 8RETURNENTER
SETUPDISCAUDIO
SUBTITLE
MENUS
RATING
16 : 9
RETURNENTER
SETUPVIDEOTV ASPECTENGLISH
POS  1
ON
RETURNENTER
SETUPDISPLAYMENU LANGUAGE
OSD POSITION
OSD MESSAGES
OFF
STANDARD
ON
RETURNENTER
SETUPAUDIODIGITAL AUDIO OUT
D. RANGE COMPRESS.
AUDIO DURING SRCH
AUDIO MENU VIDEO MENU DISPLAY MENU DISC MENU
(See pages 53 to 55) (See page 55) (See page 56) (See pages 56, 57)
4
Common procedures 
						

							53
 Selecting AUDIO language [DVD]
Press the SELECT (  ,  ) button to select AUDIO and press ENTER button.
Press the SELECT ( 
 ,  ) button to select item and press ENTER button.
Initial settings
RETURNENTER
SETUPAUDIO
ENGLISH
FRENCH
SPANISH
ORIGINAL
OTHER  0
The language is selected.
The original language of each disc will be selected.
Another language can be selected.
(Refer to the language codes on page 58.)
•Press CANCEL if an incorrect language code is entered.
 Selecting SUBTITLE language [DVD]
Press the SELECT (  ,  ) button to select SUBTITLE and press ENTER button.
Press the SELECT ( 
 ,  ) button to select item and press ENTER button.
•Press CANCEL if an incorrect language code is entered.
RETURNENTER
SETUPSUBTITLE
AUTOMATIC
ENGLISH
FRENCH
SPANISH
OTHER  0
AUTOMATIC:Subtitle language will automatically be selected in
accordance with the audio soundtrack language.
(Factory preset)
•If the language selected for the “AUDIO” is actually
used during playback, the subtitles will not appear.
•If another language is used during playback, the
subtitles will appear in the language selected at
the setup “AUDIO”.
ENGLISH / FRENCH / SPANISH:  The language is selected.
OTHER 0:Another language can be selected.
(Refer to the language codes on page 58.)
DISC MENU
1
2
1
2
These settings allow you to choose the languages used when a DVD is played.
If the language selected is not available on the disc, the language designated by each disc will be selected. There
are cases where the selected language recorded by the disc designates another language.
 Press the SELECT (  ,  
) button to select DISC menu and to set following steps. 
						

							54
Initial settings

 Selecting MENUS [DVD]
Press the SELECT (  ,  ) button to select MENUS and press ENTER button.
Press the SELECT ( 
 ,  ) button
to select item and press ENTER.

 Selecting RATINGS [DVD]
RETURNENTER
SETUPMENUS
ENGLISH
FRENCH
SPANISH
OTHER    0
Notes:
•If the language selected is not available on the disc, the language
designated by each disc will be selected.
•Press CANCEL if an incorrect language code is entered.
•Press return to the previous screen, press RETURN button.
Press the SELECT ( 
 ,  ) button to select RATINGS and press ENTER button.
This feature is used to disable the playing of some DVDs which are unsuitable for some audiences, for example, children.
•Some DVDs are encoded with a specific rating level. If the rating level of the disc is higher than that preset in the
initial settings operation, playback of the disc will be prohibited.
Input a 4-digit password with the numeric buttons and
press ENTER button.
RETURNENTER
SETUPRATINGENTER  A  4 - DIGIT
THEN  PRESS  ENTER. PASSWORD.
•Do not forget your password.
•Factory setting : 1111
Press the SELECT ( 
 ,  ) button to select the level and press ENTER button.
Setting is finished and the initial settings screen is displayed.
• The rating is locked. Any discs with a higher rating than the setting cannot be played back unless the password
is entered.
Level 8:All DVDs can be played.
(Factory preset)
Level 7 to 2:DVDs for general audiences/children can be played.
(DVDs for adults are prohibited.)
Level 1:DVDs for children can be played.
(DVDs for adults/general audiences are prohibited.)
RETURNENTER
SETUPRATING
NO  LIMIT 8
6
4
2 7
5
3
1
1
2
ENGLISH:English is selected. (Factory preset)
FRENCH / SPANISH: The language is selected.
OTHER 0:Another language of each disc will be selected.
(Refer to the language codes on page 58.)
1
2 
						

							55
Initial settings

 Setting TV screen aspect
Select the aspect, conventional size screen (4:3) or wide screen (16:9), when connecting to your TV set.
Press the SELECT ( 
 ,  ) button to select VIDEO menu and press ENTER button.
Press the SELECT ( 
 ,  )
button to select aspect item
and press ENTER button.
• Change the password
Press the SELECT (  ,  ) button to select the CHANGE
PASSWORD and press ENTER button.
Input new password and press ENTER button.
Press RETURN  button to exit RATINGS menu.
RETURNENTER
SETUPRATING
CHANGE  LEVEL
CHANGE  PASSWORDLEVEL  1
RETURNENTER
SETUPRATING
2 2 2 2 ENTER  A  NEW
THEN  PRESS  ENTER. 4 - DIGIT  PASSWORD.
RETURNENTER
SETUPRATING
3 3 3 3 REMEMBER THE
CANNOT CHANGE
THE RATING LEVEL. PASSWORD. OR YOU
16 : 9
RETURNENTER
SETUPVIDEOTV ASPECT
VIDEO MENU
RETURNENTER
SETUPTV ASPECT
16 : 9
4 : 3 LETTERBOX
4 : 3 PAN&SCAN
1
2
3
1
2
16:9: Select when a wide screen TV set is connected. (Factory preset)
Select this if the disc video type is 16:9. (For wide screen TVs,
set the screen mode to Full.)
 4:3 LETTERBOX: 
Select when a conventional TV set is connected.
Wide video with an aspect ratio like 16:9 is played back
on the screen with black bands on the top and bottom.
 4:3 PAN&SCAN: Select when a conventional TV set is connected.
Wide video with an aspect ratio like 16:9 is played back
on the screen with either both sides or one side cut off.
 • If Pan & Scan or Letterbox is designated
beforehand on the disc side, the disc designation
takes priority. 
						

							56
Initial settings

 Setting on screen DISPLAY
Press the SELECT (  ,  ) button to select DISPLAY menu .
Press the SELECT ( 
 ,  ) button to select each item and press ENTER button.
DISPLAY MENU
ENGLISH
POS  1
ON
RETURNENTER
SETUPDISPLAYMENU LANGUAGE
OSD POSITION
OSD MESSAGES
RETURNENTER
SETUPMENU LANGUAGE
ENGLISH
FRANÇAIS
ESPAÑOL
RETURNENTER
SETUPOSD POSITION
POS 1
POS 2
RETURNENTER
SET UPOSD MESSAGES
ON
OFF
RETURNENTER
SETUPOSD MESSAGES
ON
OFF

 Setting AUDIO [DVD]
Press the SELECT (  ,  ) button to select AUDIO menu .
Press the SELECT ( 
 ,  ) button to select each item and press ENTER button.
AUDIO MENU
OFF
STANDARD
ON
RETURNENTER
SETUPAUDIODIGITAL AUDIO OUT
D. RANGE COMPRESS.
AUDIO DURING SRCH
RETURNENTER
SETUPDIGITAL AUDIO 
OUT
OFF
BITSTREAM
LPCM
1
2
1
2
You can change the language used for the on screen display
menus.
ENGLISH: SELECTED as onscreen language.
FRANÇAIS: SELECTED as onscreen language.
ESPAÑOL: SELECTED as onscreen language.
POS 1: Display appears at the position on the top side of the
screen.
POS 2: Relative to Position 1, the display appears at the
bottom.
(Select this for example, when part of the display is
missing.)
This is used to turn the display of functions like PLAY and
STOP on or off.
ON: Functions like PLAY and STOP are displayed on
the television screen.
OFF: Functions like PLAY and STOP are not displayed
on the television screen.
Digital audio output setting
 • This is for selecting the type of digital audio signal output from
the optical digital audio output terminal of this device,
according to the connection method with other equipment.
OFF: For analog connection of audio output ➠  Set to OFF.
BITSTREAM: When connecting with digital equipment with a
built-in Dolby digital decoder or DTS decoder ➠
Set to BITSTREAM.
 LPCM: 
When connecting with digital equipment without a built-in
Dolby digital decoder or DTS decoder ➠ Set to LPCM.
When playing back a DVD recorded at LPCM 96 kHz using 96 kHz
sampling, perform analog connection by setting to OFF. Optical
digital output is not compatible in this case. (When BITSTREAM or
LPCM is selected, downsampling to 48 kHz is done for both optical
digital output and analog output.)
CAUTION:
 • When performing digital connection with equipment without a
built-in Dolby digital decoder or DTS decoder, be sure to set
to LPCM.
 • If setting is not done correctly, noise will be generated, and
this may hurt your ears or damage speakers.
•To return to the previous screen, press RETURN button.
•To return to the previous screen, press RETURN button.
See next page
See next page 
						

							57
ENGLISH   • FRENCH • SPANISH • ORIGINAL • OTHER 0
AUTOMATIC   • ENGLISH • FRENCH • SPANISH • OTHER 0
ENGLISH    •  FRENCH  •  SPANISH  •  OTHER 0
LEVEL 8   (NO LIMIT)   •   LEVEL 1 to 7
4 digit numeric  (  1111   Factory setting)
16 : 9      •   4 : 3 LETTERBOX   •   4 : 3 PAN&SCAN
ENGLISH     •   FRANÇAIS   •   ESPAÑOL
POS 1      •    POS 2
ON      •    OFF
OFF      •    BITSTREAM    •    LPCM
STANDARD      •    MAX RANGE    •    MIN RANGE
ON      •    OFF
Intial setting condition of DVD SET UP menu
SETUP
MENUS
DISC
VIDEO
AUDIO
AUDIO LANGUAGE
SUBTITLE LANGUAGE
MENUS LANGUAGE
RATINGS
PASSWORD
TV ASPECT
MENU LANGUAGE
OSD POSITION
OSD MESSAGES
DIGITAL AUDIO OUT
D. RANGE COMPRESS.
AUDIO DURING SEARCH
DISPLAYITEMS CONTENTS OF SETTING
 Intial setting (Factory setting)
Ref.
page
53
53
54
54
55
55
56
56
56
56
57
57

 Setting AUDIO [DVD]
Press the SELECT (  ,  ) button to select AUDIO menu .
Press the SELECT ( 
 ,  ) button to select each item and press ENTER button.
1
2
Setting for dynamic range control
This is for selecting the DVD dynamic range (difference
between high and low volume).
 • 
This setting works only with DVD discs recorded in Dolby digital.
STANDARD: Set this to listen with a range equivalent to a
normal television.
MAX RANGE: 
Set this to listen with the range recorded on the disc.
MIN RANGE: Set this to listen with a smaller difference between
the maximum and minimum volume. (When you
want a powerful sound even at low volume, or when
you wish to moderate high volume, etc.)
OFF
STANDARD
ON
RETURNENTER
SETUPAUDIODIGITAL AUDIO OUT
D. RANGE COMPRESS.
AUDIO DURING SRCHRETURNENTER
SETUPD. RANGE
COMPRESS.
STANDARD
MAX RANGE
MIN RANGE
RETURNENTER
SETUPAUDIO DURING
SEARCH
ON
OFF
•Press return to the previous screen, press RETURN button.
Previous page
Setting volume during fast forward
This sets whether or not to output audio during fast forward (2x
speed) of DVDs and video CDs.
ON: Audio is output during fast forward (2x speed).
OFF: Audio is not output during fast forward (2x speed).
 • With a music CD, audio is output at all speeds during fast
forward and rewind, regardless of this setting.
Initial settings 
						

							58
Language code list
Enter the appropriate code number for the initial settings  “AUDIO”, “SUBTITLE” and/or “MENUS”. (See pages 53, 54)
Code
6565
6566
6570
6577
6582
6583
6588
6590
6665
6669
6671
6672
6678
6679
6682
67796765
6783
6789
6865
6869
6890
6976
6978
6979
6983
6984
6985 
7065
7073
7074Language
Afar
Abkhazian
Afrikaan
Ameharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorssian
Bulgarian
Bihari 
Bengali; Bangla 
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
German
Bhutani
Fiji Finnish Estonian
Persian  Basque Spanish Esperanto English
GreekCode
7079
7082
7089
7165
7168
7176
7178
7185
7265
7273
7282
7285
7289
7365
7378
73847383
7387
7465
7473
7487
7565
7575
7576
7577
7578
7579
7587
7585
7589
7665Language
Faroese
French
Frisian
lrish
Scots Gaelic
Galician
Galician
Gujarati 
Hausa
Hindi
Croatianb
Hungarian
Armenian
Interlingua
Indonesian
lcelandic
Italian
Hebrew
Japanese
Yiddish 
Javanese
Georgian
Latin Kirghiz  Korean
Kurdish Kashmiri Kannada Cambodian Greenlandic
KazakhCode
7678
7679
7684
7686
7771
7773
7775
7776
7778
7779
7782
7783
7784
7789
7865
78767869
7879
7982
8065
8076
8083
8084
8185
8277
8279
8285
8365
8368
8372
8373Language
Lingala
Laotian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian 
Marathi
Malay
Maltese 
Burmese
Nauru
Nepali
Dutch
Norwegian
Oriya
Punjabi
Polish
Pashto, Pushto
Singhalese
Serbo-Croatian
Russian
Sindhi Sanskrit Romanian
Rhaeto-Rmance
Quechua PortugueseCode
8375
8376
8377
8378
8379
8381
8382
8385
8386
8387
8465
8469
8471
8472
8473
84768475
8479
8482
8484
8487
8575
8582
8590
8673
8679
8779
8872
8979
9072
9085Language
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Sundanese
Swedish
Swahili
Ta m i l
Telugu
Tajiki  
Thai
Tigrinya
Turkmen
Tagalog
Tonga
Turkish
Tatar
Twi 
Ukrainian
Zulu Chinese WoIof
Yoruba Xhosa Volapük  Vietnamese Uzbek
Urdu 
						

							59
The Images on the TV screen depend on the type of software and the TV set.
How images appear on your TV (aspect ratios of the screen)
•The images which appear on the TV screen, and what each screen mode is called, depend on the manufacturer of
the TV set and type of TV set. Consult the instruction manual provided with your TV set.
For your reference:
•Letterbox
Black bands are inserted at the top and bottom of the screen to fill in the gaps where the size of the picture is smaller
than the screen.
•Pan and Scan
Part of the wide-screen picture (either at both sides or one side of the screen) is automatically eliminated so that the
picture fills the whole screen.
Type of softwareType of TV set (
ASPECT mode)
 
4:3 16:9 (
“FULL” mode)
16:9 (
“ZOOM” mode)
16:9 (
“AUTO” mode)
 
Wide-screen 
(
pan and scan
 format)
Software (
4:3)
Software 
(
4:3, Letterbox)Letterbox 
(
with black bands at 
top and bottom)
 Screen horizontally 
enlarged (
with black 
bands at top and 
bottom)Full screen 
Screen in which the 
picture at the far left 
and far right ends only 
is extended horizontally 
(
with black bands at 
top and bottom)
Right and left edges 
are cut off. Full screen  Top and bottom 
edges are cut off.Full screen
Full screen  Screen horizontally 
enlarged  Top and bottom 
edges are cut off.  Full screen 
(
with black bands at 
right and left)
   
						

							60
Troubleshooting
Before requesting service for this LCD/DVD combo, check the chart below for a possible cause of the problem you are experiencing.
Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation.
If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem,
consult your dealer for instructions.
For TV broadcasts (VHF, UHF)
Symptoms
Power supply does not go on
Remote control cannot be
operated
Image shakes, or image is
unclear
There are spots on the picture,
or the screen shakes
The image appears doubled
or tripled
A color pattern appears, or
colors disappear
Only a certain channel looks bad
The channel number
disappears from the screen
When the image is not stable,
the screen turns completely
white for a moment
The screen goes dark
momentarily when the
channel is changed.
The TV makes a hissing
noise occasionally
The screen display shakes
with video input
There are parts at the top
and bottom of the screen
where there is no image
Top and bottom of picture
are missing after zoomCause and remedy
• Is power supply plug unplugged from the outlet?
• If power will not go on with the remote control, is the power supply of the TV Off?
• Is battery exhausted, or is battery polarity wrong?
• Is the remote control receiver illuminated with strong light from a fluorescent
lamp etc.?
• Are you using the special-purpose remote control that come with this equipment?
(The unit will not operate with another remote control.)
• Is there deterioration, breakage or disconnection of the antenna or antenna wire?
• Is the antenna wire connected correctly?
• Is the system affected (by radio wave interference or induced electromagnetic
waves) by external sources (automobiles or trains, high-voltage wires, neon,
motors, magnetized steel frame, or iron rain shutters, etc.)?
➠Turn off the power supply, and try changing the equipment setup location. If
that has no effect, separate magnet-proofing will be required.
• Is the antenna direction shifted?
• Are reflected electromagnetic waves being received from mountains or buildings?
• Is the equipment being affected by another TV (electromagnetic interference)?
➠Changing the TV setup location may lead to improvement.
•Is channel fine tuning correct?
• Has the screen display button been pressed?
➠Press the Screen display button again.
If the system is switched to external input and there is no external signal
video, the number will disappear.
• This occurs when the signal for driving the liquid crystal is lost, and is not a
malfunction.
• The screen is darkened for a moment to conceal noise generated when changing
channels.
• If the screen and audio are not abnormal, this sound is caused by slight expansion
and contraction of the cabinet due to changes in room temperature. It has no
effect on performance.
• When input is switched to video input, this may occur if there is no signal at the
video/audio input terminal.
• With video software wider than 16:9 (cinema vision size software etc.) there are
parts at the top and bottom of the screen where there is no image.
• Has the screen position adjustment been left shifted?
➠Adjust the screen position.Page
–
13
7
–
–
–
8, 9
–
–
–
–
19
–
–
–
10, 18
21
24