Panasonic Digital Copier DP-2000/2500/3000 Operating Instructions
Have a look at the manual Panasonic Digital Copier DP-2000/2500/3000 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Installation and Configuration (Windows NT 4.0) 51 Printer Section Handling Tab Sorter Select whether to Stack, Sort, Rotate-Sort or Shift-Sort when printing multiple copies. Note: When the Staple is set to On, the Rotate-Sort and Shift-Sort is not activated even if it is selected. Printing on both sides (Duplex) Select duplex printing for printing on both sides. Note 1) Duplex Printing is allowed only when the Dual-Path Exit Guide Unit, Paper Transport Unit and Automatic Duplex Unit (DA-FK200/FK210/MD200) are installed. Note 2) Check [Duplex Printing] check box in Device Options Tab. Flipping Direction Select binding side (Long Edge/Short Edge) for duplex printing. Binding Margin Select the binding margin upon duplex printing. The width of binding margin is specified on the main unit. (See page 38 of the Copier Operating Instructions) Output Tray Specify the output destination. (Auto Selection, Inner Tray 1, Inner Tray 2) Note 1) Output Tray selection is allowed only with Dual-Path Exit Guide Unit, Paper Transport Unit, Exit Tray (Outer) or 1-Bin Finisher (DA-FK200/FK210/XT200/FS200) installed. Note 2) Check the [Inner Tray], [Outer Tray] or [Finisher] check boxes in the Device Options Tab.
Installation and Configuration (Windows NT 4.0) 52 Staple Specifying staple printing is allowed when the output tray is set to Finisher. Note 1) Staple printing is allowed only with Electronic Sorting Board (DA-ES200 : For DP-2000 only) and 1-Bin Finisher (DA-FS200) installed. Note 2) Select Sort in the sort menu. Note 3) Paper is stapled at the top left or at top right. (See table below.) Letter A4 Letter A4 Letter A4 Ledger Legal A3 FLS B4 Ledger Legal A3 FLS B4 Letter/A4 Ledger/Legal/ A3/FLS/B4 Letter/A4 Letter A4 Letter/A4 Letter A4 Ledger/Legal/ A3/FLS/B4 Letter/A4 Top left Top right Top right Top right Note) Stapling on Invoice/B5 sheet is not allowed. Note) Stapling on Invoice/B5 sheet is not allowed. Letter/A4 Top left Note) Stapling on Invoice/B5 sheet is not allowed. Ledger/Legal/ A3/FLS/B4 Top left Note) Stapling on Invoice/B5 sheet is not allowed. Document orientation Paper orientation Stapling position
Installation and Configuration (Windows NT 4.0) 53 Printer Section Security print Select to enable security print. Note 1) Security print is allowed only when the security print password is set on the Device Options Tab. (See page ) button Return all items in the window to standard settings (default). button Displays the version information about the printer driver. About... Restore Defaults 45
Installation and Configuration (Windows NT 4.0) 54 NOTE Restore Defaults About... Quality Tab dpi (dot per inch) means the number of dots contained in one inch. The higher the value is, the higher the resolution becomes. Resolution Select the printer resolution (300/600dpi). Text Color Select the print control of colored text. Print all text as black All colored text is printed as solid black. Print colored text with halftone Colored text is printed using shades of gray. button Return all items in the Quality Tab to standard settings (default). button Displays the version information about the printer driver.
Installation and Configuration (Windows NT 4.0) 55 Printer Section Restore Defaults About... Fonts Tab Use printer fonts instead of TrueType fonts Prints using printer fonts, substituting for the TrueType fonts used in the original document. The substituting printer font can be set from the Font Substitution Table. Always use TrueType fonts Always uses TrueType fonts without substituting them with printer fonts. button Return all items in the window to standard. button Displays the version information about the printer driver. NOTE For information regarding setting the Font Substitution Table, see Font Substitution Tab (page ). 47
Installation and Configuration (Windows NT 4.0) 56 Setting the default Output Tray on the Device REDIAL/PAUSE ABBR FLASH/SUB-ADDR SET ORIGINALCOPY SIZESIZE LEDGER LEGAL INVOICELETTER LETTER MONITOR RESET START 123 456 789 0 PQRSGHI TUVJKL ABC WXYZMNODEF STOPON LINE ON LINE DATA 2SIDED COPY1SIDEDCOPY FAX PRINTER MULTI-SIZE FEED RESOLUTIONLINE SELECT ALARMACTIVE CLEAR ENERGY SAVERDP-2000INTERRUPTFUNCTION TONE COPY SORT STAPLE SHIFT OUTPUTTRAYDIRECTORYSERCH PAPERTRAYLIGHTERDARKER ZOOM/VOL PHOTOTEXT/PHOTOTEXTINTERNETP1zP2 P3SPACE S-FINEFINEP4SYMBOLS P5CAPS 16 u17v18w19x20y11p12q13r14s15t06k07l08m09n10o01f02g03h04i05j abc deOHPMEMORYINSTAMPCOPIEDM2MEM XMTBLANK2 in 1BOOKEDGEMARGIN2PAGE COPYM1 CONTRASTLCD REDIAL/PAUSE LINESELECTFLASH/SUB-ADDR SET MON.VOL. ORIGINALCOPY SIZESIZE LEDGER LEGAL INVOICELETTER LETTER MONITOR RESET START 123 456 789 0 PQRSGHI TUVJKL ABC WXYZMNODEF STOPON LINE ON LINE DATAFAX INTERNET PRINTER MULTI-SIZEFEEDSORT ALARMACTIVE CLEAR ENERGY SAVERDP-2500INTERRUPTFUNCTION TONE COPYADD TONER Touch-panel display Function Settings Reset Key Function Settings Reset Key PRINTER OUTPUT TRAY 1:INNER 1 Press the PRINTER key. Press the FUNCTION key. Press the PRINTER SETTINGS key. Select the 00 PRINTER OUTPUT TRAY. Select the desired Output Tray. After setting, press the OK key on the screen. Press the RESET key. Press the PRINTER key. Press the FUNCTION key. Press 2 and the SET key. Select the desired Output Tray. After setting, press the SET key. Set the printer paper priority accommodation position. Outer/Inner 2/Inner 1 Setting mode Settings Preset value number 00 PRINTER OUTPUT TRAY Inner 1 This setting will determine which tray will be used for the output of a print job when the selection in the Output Tray box on the Handling tab of the Printer Properties is set to Auto Selection.
57 Printer Section Installation and Configuration (Windows 2000) Installing the Printer Driver Next Double-click the Add Printer icon. Click the button. Open the Printers dialog box Click the Start button. Place the cursor on Settings and click Printers. Log in using an account with the authority to change system settings (e.g. Administrator). About Windows 2000 Panasonic has performed operational tests on the Document Scanner, Status Monitor and Printing System - software using Office 2000. However, the company does not necessarily guarantee normal operation of all applications on Windows 2000. Panasonic has not registered with the Windows 2000 logo. Ignore the warning message about the logo upon installation. Windows 2000 is capable of disallowing installation of drivers without logo registration. If the function has been activated, cancel the function for installation.
Installation and Configuration (Windows 2000) 58 Next Next Next6 • For local printer, select a Printer Port and click the button. Then proceed to step 13. For network printer, select Create a new port to Standard TCP/IP Port and click the button. 5 Click the button. 4 Select Local printer and click the button. Specify Network Printer for installing a printer on server upon network. Refer to the manual about Windows 2000. Even if the printer is networked, install as Local printer for now. This will be changed in later steps.Next
Installation and Configuration (Windows 2000) 59 Printer Section Settings... Next Click the button. 9 Select Custom and click the button. 8 Enter the IP Address and the Port Name and click the button. Note:The Port Name is automatically entered by Windows 2000. You may change this as required. Next 7
Installation and Configuration (Windows 2000) 60 Next Finish Select LPR on Protocol menu. Enter the Queue Name and select LPR Byte Counting Enabled on LPR Settings menu. Click the button. 12 Click the button. 11 Click the button. OK 10