Panasonic Dmc Fz70 Owners Manual

							Application (View)
Using the [Playback] menuVQT5B76
- 181 -
 • For the setting procedures of the menu.  (→ 57)
[Face Rec Edit]
Edit or delete the recognition information for pictures with mistaken Face Recognition.
Press   to select [REPLACE] or [DELETE] and then press 
[MENU/SET]
Press   to select the picture and then press [MENU/SET]
Press   to select the person and then press [MENU/SET]
 • People whose Face Recognition information has not been registered cannot be 
selected.
(When [REPLACE] is selected)
Press     to select the person to replace and then press 
[MENU/SET]
 • Confirmation screen is displayed. If you select [Y es], the operation is executed.
 ●When Face Recognition information is deleted, it cannot be restored. ●Pictures for which all Face Recognition information has been deleted are not 
categorized in Face Recognition during [Category Selection].
 ●Recognition information cannot be edited in protected pictures.    
						

							Application (View)
Using the [Playback] menuVQT5B76
- 182 -
 • For the setting procedures of the menu.  (→ 57)
[Copy]
You can copy pictures between built-in memory and memory card.
Press   to select the copy destination and then press 
[MENU/SET]
:  Copy all pict ures from built-in memory to card.:  Copy 1 pictu re at a time from card to built-in memory.
(When [ ] is selected)
Press   to select the picture and then press [MENU/SET]
 • Confirmation screen is displayed. If you select [Y es], the operation is executed.
 ●Copying pictures may take several minutes. Do not turn off the camera or perform 
other operations during copying.
 ●If identical names (folder/file numbers) are present in the copy destination, a new 
folder for copying will be created when copying from built-in memory to card (). 
Identically-named files will not be copied from card to built-in memory (). ●The following settings are not copied. Set them again after copying.
- [Print Set]    - [Protect]    - [Favorite]
 ●Only pictures from Panasonic digital cameras (LUMIX) may be copied. ●Motion pictures recorded in [AVCHD] format cannot be copied.    
						

							Connecting with other devices
Viewing on TV screen
VQT5B76- 183 -
Connecting with other devices
You can view pictures on a TV screen by connecting your camera to your TV with the 
HDMI mini cable or AV cable (optional).
 ●Also consult TV operating manual.
Preparation:
 • Set [TV 

Aspect] to connect your camera to a TV using the AV cable (optional)  (→71).
 • T

urn off both camera and TV.
Connect camera to TV (→184)
Turn on TV
 ●Set to auxiliary input.
Turn on the camera and press the Playback button
 • Input of the  TV will switch automatically and playback screen is displayed when 
connected to a VIERA Link compatible TV using an HDMI mini cable with the 
[VIERA Link] (→71) set to [ON].  (→185)
 ●Depending on the [Aspect Ratio], black bands may be displayed on the top and 
bottom or the left and right of the pictures.
 ●Change the screen mode on your TV if the picture is displayed with the top or bottom 
cut off.
 ●Output from the HDMI mini cable has priority when both AV cable and HDMI mini 
cable are connected.
 ●The connection with the USB connection cable will take priority when you connect the 
USB connection cable simultaneously with the HDMI mini cable.
 ●When you play back a picture vertically, it may be blurry. ●When pictures are displayed, they may not be displayed properly depending on the 
type of TV.
 ●No sound is output from the camera speakers.
The recorded pictures can be played back on a TV with an SD Memory Card slot. • Proper playback (aspect ratio) will be dependent on the 
TV used for viewing.
 • The file format of the motion pictures that can be played back differs depending on the TV model.
 • Y

ou may not be able to play back panorama pictures. Also you cannot perform 
automatic scrolling playback of panorama pictures. 
 • For cards compatible with playback, refer to the operating instructions of the TV

.    
						

							Connecting with other devices
Viewing on TV screenVQT5B76
- 184 -
 ■To connect with an HDMI mini cable
An HDMI mini cable can be used to enable viewing of still and motion pictures in high 
resolution.
Check the plug direction and insert it 
straight in.
(If the cable is inserted in the wrong 
direction, the plug could become deformed 
and cause faulty operation)
HDMI mini cable To HDMI video/audio input socket
 • Use a “High Speed HDMI mini cable” with the HDMI logo. Cables that do not comply with the HDMI standards will not work. “High Speed HDMI mini cable” (T ype C-T
ype A 
plug, up to 3 m (9.8 feet) long)
 • Audio will be played back as stereo (2ch). • No picture is displayed on the camera screen. • For more details about VIERA

 Link (HDMI) playback, refer to (→185).
 ■To connect with an AV cable (optional)
Check the plug direction and insert it 
straight in.
(If the cable is inserted in the wrong 
direction, the plug could become deformed 
and cause faulty operation)
AV cable (optional)
Yellow: To video socket
White: To audio socket
 • Always use a genuine Panasonic  AV cable (DMW-AVC1: optional). •Check the [TV Aspect]. (→71) • Audio will be played back in monaural.    
						

							Connecting with other devices
Viewing on TV screenVQT5B76
- 185 -
VIERA Link (HDMI) (HDAVI Control™)
What is VIERA Link (HDMI)? ●VIERA Link is a function that automatically links this camera to VIERA Link-
compatible devices by connecting HDMI mini cables for enabling easy operation 
with the VIERA remote control. (Some operations are not available.)
 ●VIERA Link (HDMI) is an exclusive Panasonic function added to the industry-
standard HDMI control functions known as HDMI CEC (Consumer Electronics 
Control). Operation is not guaranteed when connecting with non-Panasonic HDMI 
CEC-compatible devices. Refer to your product manual to verify compatibility with 
VIERA Link (HDMI).
 ●This camera supports VIERA Link (HDMI) Version 5. This is the Panasonic standard 
that also supports previous Panasonic VIERA Link devices.
Preparation: Set [VIERA Link] to [ON] (→71).
Connect the camera to a VIERA Link (HDMI)-compatible 
Panasonic television (VIERA) with an HDMI mini cable 
(→184)
Turn on the camera and press the Playback button
Operate with the remote control for the TV
 • Operate with reference to the operation icons displayed on the screen.
 ●Use a “High Speed HDMI mini cable” with the HDMI logo. Cables that do not comply 
with the HDMI standards will not work. “High Speed HDMI mini cable” (T ype C-Type A 
plug, up to 3 m (9.8 feet) long)
 ●If you do not know if your TV is VIERA Link (HDMI) compatible, see the TV’s operating 
instructions.
 ●Cables that do not comply with HDMI standards will not work. ●To play back the audio of the motion pictures, set the [Sound] in the Slide Show 
setting screen to [AUTO] or [Audio].
 ●It is recommended to connect this unit to an HDMI terminal other than the HDMI1 if 
there are 2 or more HDMI input terminals on the TV.
 ●Operation using the button on this unit will be limited.    
						

							Connecting with other devices
Viewing on TV screenVQT5B76
- 186 -
 ■Other related operations
 ●Turning the unit OFF 
The camera can also be turned off when the television is turned off with the remote 
control.
 ●Automatic input select • Television input automatically switches to the camera screen if you press the 
Playback button while the camera is connected via the HDMI mini cable and turned 
on. The television can also be switched on via the camera from Standby Mode  
(if “Power on link” on the television is set to “on”).
 • Depending on the HDMI terminal on the 

TV, the input channel may not switch 
automatically. In this case, use the remote control for the TV to switch the input 
channel. (For details on how to switch input, please read the operating instructions 
for the TV.)
 • If VIERA

 Link (HDMI) does not function correctly  (→218)    
						

							Connecting with other devices
Viewing on TV screenVQT5B76
- 187 -
Viewing 3D still pictures
If you connect this camera to a 3D-capable TV, and play back still pictures that you 
recorded in 3D, you can enjoy impressive 3D still pictures on the  TV. If a 3D-capable TV 
has an SD card slot, you can play back 3D still pictures that you recorded by inserting the 
card into the slot.
Preparation: Set [3D Playback] to [3D] (→71).
Connect the camera to a 3D-capable TV by use of an HDMI 
mini cable to display the playback screen 
(→184)
Display still pictures recorded in 3D
 • When the [VIERA  Link] setting on the camera is set to [ON] and the camera is 
connected to a VIERA Link (HDMI)-compatible Panasonic television (VIERA), the 
television automatically switches its input and the playback screen is displayed.
 • [3D] appears on the thumbnail of the 3D still pictures.
 ■To perform Slide Show playback of only still pictures recorded in 3D
Select [3D Play] in [Slide Show] of the [Playback Mode] menu  (→163)
 ■To select and play back only still pictures recorded in 3D
Select [3D Play] in [Filtering Play] of the [Playback Mode] menu  (→165)
 ■To switch the playback method for the still pictures recorded in 3D
 Select the picture recorded in 3D  Select [2D/3D Settings] on the [Playback Mode] menu and then press [MENU/SET] 
(→162)
 • Playback method will switch to 3D if it is playing back in 2D (conventional image), or it  will switch to 2D if it is playing back in 3D.
 • If you feel tired, uncomfortable or otherwise strange when playing back pictures recorded in 3D, set to 2D.    
						

							Connecting with other devices
Viewing on TV screenVQT5B76
- 188 -
 ●Viewing 3D still pictures too close to a TV may cause eyestrain. ●When an image is not suitable for 3D viewing (due to excessive parallax, etc.) • During Slide Show playback:  The image is displayed in 2D.
 • During [Filtering Play]:  A

 message appears confirming whether to display the image 
in 3D or not.
 ●When a 3D image is played back on a TV that is not 3D-capable, 2 pictures may 
appear side-by-side on the screen.
 ●On the LCD monitor of this camera, 3D still pictures will be played back in 2D 
(conventional pictures).
 ●If you switch between 3D still pictures and normal still pictures while playing back 
pictures, a black screen will be displayed for a few seconds.
 ●If you select a thumbnail of 3D still pictures or display a thumbnail after playing back 
3D still pictures, it may take a few seconds to start playing back or displaying the 
pictures.
 ●When a TV has not been converted for viewing 3D still pictures, do necessary 
preparation on the TV. (For details about the necessary preparation of the TV, read 
the manual for the TV.)
 ●During 3D playback, [Setup] menu, [Playback] menu, Playback Zoom, and delete 
operation cannot be used.
 ●You can store 3D still pictures on a computer or Panasonic recorder. (→189, 196)    
						

							Connecting with other devices
Keeping the still pictures and motion pictures on 
your PC
VQT5B76- 189 -
Still/motion pictures can be copied from the camera to your computer by connecting the 
two together.
 • Some computers can read directly from the camera’
s memory card.  
For details, see the manual for your computer.
 • If your computer does not support SDXC Memory Cards a message will be displayed  requesting you to format the card. (Do not format the card. 

This will erase recorded 
pictures.) If the card is not recognized, refer to the following support website.  
http://panasonic.net/avc/sdcard/information/SDXC.html
 ■Computer specifications
You can connect the camera to a computer that can detect a mass storage device 
(device that stores a large volume of data).
 • Windows: Windows 8 / Windows 7 / Windows V

ista / Windows XP
 • Mac: OS X (10.1 - 10.8)
Some motion pictures recorded in [AVCHD] may not be scanned correctly by copying 
a file or folder.
 • When using Windows, be sure to use the “PHOT
 OfunSTUDIO” software on the 
supplied CD-ROM to copy motion pictures recorded in [AVCHD].
 • When using Mac, you can copy motion pictures recorded in [A

VCHD] using 
“iMovie
  ’11”. (For details about iMovie   ’11, please contact Apple Inc.)    
						

							Connecting with other devices
Keeping the still pictures and motion pictures on your PCVQT5B76
- 190 -
About supplied software
The supplied CD-ROM contains the following software.
Install the software on your computer before using.
 ■PHOTOfunSTUDIO 9.2 AE
You can capture still pictures or motion pictures to your PC, or organize captured 
pictures by categorizing by recording date, model name of the digital camera used to 
record, etc. You can also correct still pictures, edit motion pictures, or write to DVD.
 • Operating environment
Supported OS Windows
® 8 (32-bit/64-bit)
Windows® 7 (32-bit/64-bit) and SP1
Windows Vista® (32-bit) SP2
Windows® XP (32-bit) SP3
CPU Windows® 8
Pentium® III 1 GHz or higher
Windows® 7
Windows Vista®Pentium® III 800 MHz or higher
Windows® XP Pentium® III 500 MHz or higher
Display 1024×768 pixels or more (1920×1080 pixels or more recommended)
RAM Windows
® 8
1 GB or more (32-bit) / 2 GB or more (64-bit)
Windows® 7
Windows Vista®512 MB or more
Windows® XP
Free hard disk 
space 450 MB or more for installing software
Refer to the Operating Instructions of “PHOTOfunSTUDIO” (PDF) for further 
information about the operating environment.