Panasonic Electronic Board UB-5310 Operating Instructions

							Electronic Board
Operating Instructions
With Installation Manual
(for qualified service personnel)
Model No. UB-5310
Stand kit is optional.
[Stand (option)] [Wall-mounting]
Operating Instructions
Installation Manual
• To assemble this unit, please refer to the Installation Manual.
 Before operating this unit, please read these instructions completely and keep them carefully for future reference.
 This product is designed for installation by a qualified servicing dealer.
Installation performed by non-authorized individuals could cause safety-related problems with the operation of 
this equipment.
 To locate the closest authorized dealer in your area, please call 1-800-449-8989.
UB-5310_MECA.book  1 ページ  ２００３年５月１５日　木曜日　午後５時２３分 
						

							2
Thank you for purchasing the Panasonic Electronic Board.
For optimum performance and safety, please read these instructions carefully.Q’ty
 Markers (red, black, and blue)    .  .  .  .  .  .  1 each
 Operating Instructions    .  .  .  .  .  .  .  .  .  .  .  .  . 1
 Eraser  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1
 Power cord   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1 Q’ty
 Letter size copy paper roll [10 m (32.8 ft.)]   .  .  . 1
 Software CD-ROM    .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1
 Software License Agreement  .  .  .  .  .  .  .  .  .  . 1
 Warranty card  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1
* The stand is optional. By way of example, this manual describes an Electronic Board which is used with the stand.
* USB cable is not included.
For your future reference
Date of purchase:  _________________________ Serial number:  ____________________________
Dealer’s name and address:  ______________________________________________________________
Dealer’s address:  ______________________________________________________________________
Attach your sales receipt here
Things you should keep a record of
Accessories
Te l :
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to 
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 
interference when the equipment is operated in a commercial environment. This equipment generates, uses, 
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction 
manual, may cause harmful interference to radio communications. Operation of this equipment in a residential 
area is likely to cause harmful interference in which case the user will be required to correct the interference at 
his own expense.
 Microsoft, Windows and Windows NT are either registered trademarks or trademarks of Microsoft Corporation in  the United States and/or other countries. Windows
® is Microsoft® Windows® operating system.
Screen shots reprinted with permission from Microsoft Corporation.
 IBM is a registered trademark of International Business Machines Corporation.
 Pentium is a registered trademark of Intel Corporation in the U.S. and other countries.
 Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated.
 All trademarks referred to in this manual are proper ty of their respective companies.
The information given in this Operating Instructions is subject to change without notice. FCC Warning:
To assure continued FCC compliance, the user must use only the provided power supply cord.
Also, any unauthorized changes or modifications to this equipment would void the user’s authority
to operate this device.
Federal Communications Commission Requirements
Cover_MECA.fm  2 ページ  ２００３年５月１５日　木曜日　午後７時２２分 
						

							3
Operating Instructions
For Your Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5
 CD-ROM  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   6
Part Names and Functions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   8
 Control panel  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   9
Loading Copy Paper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   10
Making Copies  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   11
 Copy types and procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   12
Paper Jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   13
Screen Height Adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   14
Computer Interfacing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   16
 System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   16
 Contents of CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   16
 Connecting the unit to a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   16
 Installing the driver and software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   17
 Removing the driver and software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   23
 Scanning  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   23
 Panaboard Operation Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   24
 Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   25
Daily Care and Maintenance  . . . . . . . . . . . . . . . . . . . . . . . . . . . .   26
 Cleaning the screen and the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   26
 Caring for the eraser  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   26
 Cleaning the printer head and paper feed roller. . . . . . . . . . . . . . . . . . . . . . .   26
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   28
 Meanings of error codes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   29
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   30
 Option and Separately available  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   30
Warning about saving data
When the system storage device or any of its optional storage device is adversely effected by operational 
errors, static electricity, electrical noise, vibration, dust or when the power has been cut off due to malfunction, 
repair or inadvertently, the memory contents may be lost or changed. Before operating the system, make a 
point of reading the precautionary notes in the Operating Instructions and the help information, and observe 
them during operation.
Please observe carefully the following precaution:
 Make absolutely sure that all important data is saved by back-up or the original is saved.
The manufacturer hereby declares that it cannot be held accountable for any loss or change in any data 
stored on floppy disks, hard disks, optical disks, or other memory devices.
Page
Table of Contents
Before 
You Start
Using
Help
UB-5310_MECA.book  3 ページ  ２００３年５月１５日　木曜日　午後５時２３分 
						

							4
For Your Safety
CAUTION:
TO PREVENT RISK OF ELECTRIC SHOCK HAZARD, DO NOT REMOVE THE COVER OF 
THIS PRODUCT, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR 
ANY TYPE OF MOISTURE.
THE SOCKET-OUTLET MUST BE NEAR THIS EQUIPMENT AND MUST BE EASILY 
ACCESSIBLE.
The product should be used only with the power cord that is supplied by the manufacturer.
CLASS 1 LED PRODUCT
UB-5310_MECA.book  4 ページ  ２００３年５月１５日　木曜日　午後５時２３分 
						

							5
Operating Instructions
Precautions
Never remove the cover, take apart or modify the 
product. This will void the warranty.Do not position the electronic board in a location where 
it is unstable.
Do not put drinks, other liquids or heavy items on the 
tray or screen.After installing or moving the electronic board, lock the 
casters and set the fall-prevention extension legs.
Do not use the electronic board in an excessively 
humid or dusty location.If the electronic board is not going to be used for an 
extended period of time (e.g., during extended 
holidays), turn off the power and remove the plug from 
the wall outlet.
Locking the casters
(Push this side)
Push to lock
UB-5310_MECA.book  5 ページ  ２００３年５月１５日　木曜日　午後５時２３分 
						

							Precautions
6
■CD-ROM
To prevent the CD-ROMs from accidental damages: Do not lean against the screen or on the cover (lower), 
even if the electronic board is mounted on the wall.Adjust the screen height with two persons after 
installation.
Confirm both sides of the screen are hung in the same 
height slots.Make sure to tighten the height adjustment handles 
after adjusting the screen height.
Do not touch or write on the surface 
of the disc.Do not leave the disc out of the 
protective case.Do not leave the disc in direct 
sunlight or near heat sources.
Do not place heavy objects on the 
disc case or drop the case.To clean the disc, hold the disc by 
its edges and wipe it from the 
center to the edges with a dry, soft 
cloth.
Slot 1
Slot 3
Slot 2
Slot 1 Slot 3
Slot 2Tighten 
the height 
adjustment 
handles Tighten 
the height 
adjustment 
handles
UB-5310_MECA.book  6 ページ  ２００３年５月１５日　木曜日　午後５時２３分 
						

							Precautions
7
Operating Instructions
Installation Do not install the unit where it may be exposed to direct sunlight, near heating 
equipment, or near air-conditioning vents as this may cause stretching and/or 
discoloration of the screen. 
 Do not install the unit in strong sunlight or strong lighting. Proper copying may 
become impossible.
 Do not install the unit in locations where the temperature may change suddenly as 
this may disable the unit’s ability to make copies.
Screen Film Make thick and dark lines inside the copying 
area. Note that any writing inside the shaded 
area (on right) cannot be copied.
 Do not allow writing to remain on the screen for 
an extended period of time as it will become 
harder to erase.
 Do not touch the screen, write with markers, or 
erase while the screen is moving as this may result in damage to the unit.
Markers, 
Erasers and 
Copy Paper Use only the included or designated markers, erasers and copy paper. 
(See page 30.)
Use of accessories other than those included or designated (such as oil-based 
markers) may damage the screen or result in hard-to-erase markings.
 Store markers horizontally as vertical storage may stop the ink from coming out.
 Store a copy paper roll in a cool, dark, moisture free location.
 Do not store printed copies exposed to direct sunlight or hifh humidity, or inside 
vinyl chloride (plastic) files.
 For long-term storage, make another copy with an ordinary paper copier machine.
Power Cord When moving the unit, disconnect the power cord from the electrical power socket 
and from the printer’s power connector and coil it for transportation as stepping on 
the power cord or having it catch on something during movement may result in 
damage to the cord.
USB Cable Use a shielded USB cable that is certified as logo by USB-IF.
 If you connect the electronic board to a USB hub, it is not guaranteed to work.
Copying area0 mm 12.5 mm25 mm (1
 )
25 mm (1
 )(
1/2 )
UB-5310_MECA.book  7 ページ  ２００３年５月１５日　木曜日　午後５時２３分 
						

							8
Part Names and Functions
PUSH OPEN
ON
OFF
PUSH OPEN
Screen Film
AC Inlet Power Switch Tr a y
Power Cord
Output Port
Printer Door
Open this door to load 
copy paper or to remove 
jammed paper.
(See pages 10, 13.)
Door Open 
Button
Push this button to open 
the printer door.
Control Panel
(See page 9 for details.)
USB Connector
(See page 16.)
Stand
The stand is optional.
Scanner
Copied Paper Holder
This holder holds up to 5 
sheets of output paper.
Printer
UB-5310_MECA.book  8 ページ  ２００３年５月１５日　木曜日　午後５時２３分 
						

							Part Names and Functions
9
Operating Instructions
■Control panel
Panel NameDescription
Contrast 
IndicatorThis lamp indicator displays the printing contrast used during 
copying.
Indicator off:  Normal printing contrast
Indicator on:  Darker than normal printing contrast
Contrast 
KeyEach time this key is pressed, the unit will alternate between 
normal and dark contrast modes (Normal/Dark).
2-Screen 
Copy KeyThis key causes the front and back of the screen to be copied on 
a single sheet of paper.
Multi-Copy/
Error 
IndicatorThis indicator displays the number of copies to be made. The 
display changes each time the Multi-Copy/Stop Key is pressed.
Example: 1 →  2 →  ··· →  9 →  1 →  ···
When an error occurred, a flashing symbol will appear in this display to 
indicate the error status. (See page 29.)
Multi-Copy/
Stop KeyWhen making multiple copies, press this key until the desired 
number of copies is displayed on the Multi-Copy/Error Indicator. 
This key can also be pressed while multiple copies are being 
made to stop the copying process. The display indication 
changes while multiple copies are being made as shown below. 
After reaching 0, the display will reset to 1.
Example: 5 →  4 →  3 →  2 →  1 →  0 →  1 
(countdown display during copying)
Copy KeyThis key causes the screen to be copied.
Advance 
KeyThis key advances the screen from right to left.
Contrast IndicatorAdvance Key
Multi-Copy/Error IndicatorMulti-Copy/Stop Key Copy Key
Contrast Key
2-Screen Copy Key
UB-5310_MECA.book  9 ページ  ２００３年５月１５日　木曜日　午後５時２３分 
						

							10
Loading Copy Paper
1
Turn the power switch on by pressing the “ I ” side 
of the power switch.
• The unit is ready for use when “ ” is displayed on the multi-copy/error indicator.
 The screen will move to home position and stop.
2
Push the door open button and open the printer 
door.
 If there is any copy paper remaining in the copy paper  compartment, remove it.
3
Load the copy paper roll with smooth side facing up.
Open the printer door to position B and load it, then 
move the printer door to position A to prevent 
paper roll from falling.
 Use copy paper roll with a core diameter of 25.4 mm (1 inch) or more. Using a copy paper roll with a smaller 
core could cause paper jams.
4
Pass the paper over the paper feed roller and 
under the cutter cover, then through the output port 
about 4 cm (1
1/2inches).
5
Close the printer door securely, using two hands.
 Once the door is closed, paper will feed and automatically cut. Remove and discard the small piece 
of paper.
Load a new roll when:
 Red bands become visible at the edge of the copy paper.
 The ERROR indicator “ ” goes on and off even after the printer door is closed properly.
PUSH OPEN
Power 
Switch
Copy paper 
compartment
PUSH OPEN
Door
Open
Button
A B
Smooth side Wrong directionLoosen about 
15 cm (529/32) 
as shown and 
load it.
About 
15 cm (529/32)Note
Paper feed  
roller
Cutter cover
About 4 cm (11/2)
Note
Using_MECA.fm  10 ページ  ２００３年５月１６日　金曜日　午前１０時２２分