Panasonic Kxt7775 Operating Instructions
Have a look at the manual Panasonic Kxt7775 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

11 Adjusting the Sensitivity of the Microphone Where there is a lot of background noise, for example, due to traffic or machinery, it may be necessary to adjust the sensitivity of the microphone. To adjust the sensitivity of the microphone: REAR OF UNITDOORPHONE MODULE - + Insert flat-headed screwdriver here. Locate the switch.„Turn the switch clockwise (-) if sited in a noisy location. „Turn the switch counter clockwise (+) for normal noise level (factory setting). Operation Calling from doorphone: 1. Press the call button (see Figure 12). The caller hears confirmation tone. 2. Wait for answer. Talk. Calling from an extension: 1. Pick-up your handset. 2. Dial the Doorphones extension number, refer to your PBX User Manual for this number. CALL BUTTON Figure 12

12 Important Safety Instructions Safety Requirements When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: „Read and understand all instructions.„Follow all warnings and instructions marked on the product.„Care should be exercised to avoid pinching the wires during installation. „Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. „Power Module only:Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool. „TheDoorphone Moduleis weather-resistant, but should not be subjected to direct water. „Slots and openings in the cabinet, at the back or bottom, are provided for ventilation; to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or other heat source. This product should not be placed in a built-in installation unless proper ventilation is provided. „This product should be operated only from the type of power source indicated on the product label. If you are not sure of the type of power supply to your home, consult your dealer or local power company. „Do not allow anything to rest on the power cord. Do not locate this product where the cord will be abused by people walking on it. „Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock. „Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product.

13 „ To reduce the risk of electric shock, do not disassemble this product, but take it to a qualified person when service or repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently used. „This unit should be kept free of dust, moisture, high temperatures (more than 50°C (122°F)) and vibration. „The socket-outlet shall be installed near the equipment and shall be easily accessible. „Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: „When the power supply cord or plug is damaged or frayed.„If liquid has been spilled into the product.„If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions because improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation. „If the product has been dropped or the cabinet has been damaged. „If the product exhibits a distinct change in performance.„Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.

14 FCC and Other InformationNote: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: „Reorient or relocate the receiving antenna.„Increase the separation between the equipment and receiver.„Connect the equipment into an outlet or a circuit different from that to which the receiver is connected. „Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Any changes or modifications made to this product not expressly approved by Panasonic Communications Co. Ltd. could void the users authority to operate the equipment.

84 mm (3 / ) 16 5 15 1. Place this template on the wall. 2. Drill the holes, as marked. If you mount the unit on a concrete or mortar wall, fit anchor plugs (not included) into the wall with a hammer beforehand. DRILL HOLES HERE WHEN ATTACHING INTERFACE BRACKET TO WALL DRILL HOLE HERE IF ATTACHING FRONT OF UNIT DIRECTLY TO WALL DRILL HOLE HERE IF ATTACHING FRONT OF UNIT DIRECTLY TO WALL Wall Mounting Template 11 6 m m ( 4 / ) 16 9

Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America, One Panasonic Way, Secaucus, New Jersey 07094 Panasonic Puerto Rico, Inc., Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985 http://www.panasonic.com/consumersupport Copyright:This material is copyrighted by Panasonic Communications Co. Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic Communications Co., Ltd. © 2005 Panasonic Communications Co., Ltd. All rights reserved. For your future referencePlease print, record, and retain the following information for future reference.Note: The serial number of this product can be found on the label affixed to the unit. You should record the model number and the serial number of this unit as a permanent record of your purchase to aid in identification in the event of theft. Model No.KX-T7775 Serial No. Date of Purchase Name of dealer Dealers address Dealers Tel. No. QUQX00152WAKU0505SC0Printed in the United Kingdom When you ship the product Carefully pack and send it pre-paid, adequately insured and preferably in the original carton. Attach a postage-paid letter, detailing the symptom, to the outside of the carton. DO NOT send the product to the Executive or Regional Sales offices. They are NOT equipped to make repairs. Product service Panasonic Factory Servicenters for this product are listed in the servicenter directory. Consult your certified Panasonic dealer for detailed instructions.