Panasonic Order Taker Wx T3020 Operating Instructions

							Before attempting to connect or operate this product, 
please read these instructions carefully and save this manual for future\
 use.
No model number suffix is shown in this Operating Instructions.
Order Taker
Operating Instructions
Model No.WX-T3020
ENGLISH
FRANÇAIS 
						

							CAUTION
The FCC ID number for this radio equipment is listed below.FCC ID: ACJ9TAWX-T3020
2
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a\
 Class A digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection ag\
ainst harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, an\
d can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause \
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause har\
mful interference in which case the user will be
required to correct the interference at his own expense.
FCC Warning: This transmitter must not be co-located or operated in conj\
unction with any other antenna or transmitter.
FCC Warning: The available scientific evidence does not show that any he\
alth problems are associated with using low
power wireless devices. There is no proof, however, that these low power\
 wireless devices are absolutely safe. Low power
wireless devices emit low levels of radio frequency energy (RF) in the\
 microwave range while being used. Whereas high lev-
els of RF can produce health effects (by heating tissue), exposure to \
low-level RF that does not produce heating effects
causes no known adverse health effects. Many studies of low-level RF exp\
osures have not found any biological effects.
Some studies have suggested that some biological effects might occur, bu\
t such findings have not been confirmed by addi-
tional research. WX-T3020 has been tested and found to comply with FCC r\
adiation exposure limits set forth for an uncon-
trolled equipment and meets the FCC radio frequency (RF) Exposure Guid\
elines in Supplement C to OET65.
FCC Warning: To assure continued FCC emission limit compliance, use only\
 the provided power supply cord and shielded
interface cable when connecting this device to the computer.  Also, any \
unauthorized changes or modifications to this equip-
ment would void the users authority to operate this device.
This device complies with Part 15 of the FCC Rules.  Operation is subjec\
t to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept an\
y interference received, including interference that
may cause undesired operation.
Responsible Party: Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094
Technical Support Party: Panasonic Consumer Electronics Company 1707 N. Randall Rd., Elgin IL. 60123
Technical Support Tel No.: 886-472-6767
RSS-213Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device.
The model number and serial number of this product may be
found on the surface of the unit.
You should note the model number and serial number of this
unit in the space provided and retain this book as a perma-
nent record of your purchase to aid identification in the event
of theft.
Model No.
Serial No.
For U.S.A.
For U.S.A.
For U.S.A.
CAUTION:
• Danger of explosion if battery is incorrectly replaced. Replace
only with the same or equivalent type.
• These servicing instructions are for use by qualified service per- sonnel only. To reduce the risk of electric shock do not perform
any servicing other than that contained in  the operating instruc-
tions unless you are qualified to do so.
For Canada
ICES-003This Class A digital apparatus complies with Canadian ICES-003.
For Canada 
						

							3
ATTENTION:A lithium-ion battery that is recyclable powers the prod-
uct you have purchased. Please call 1-800-8-BATTERY
for information on how to recycle this battery.
WARNING:
• This apparatus must be earthed.
• Apparatus shall be connected to a main socket outlet with a pro-tective earthing connection.
• The mains plug or an appliance coupler shall remain readily operable.
• To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
• The apparatus should not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, should be
placed on the apparatus.
• All work related to the installation of this product should be made by qualified service personnel or system installers.
• To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
• The connections should comply with local electrical code.
• The risk of hearing impairment due to exposure to excessive sound levels may be reduced by listening at lower volumes and
for shorter durations.
Limitation of Liability
THIS PUBLICATION IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EITHE\
R EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS F\
OR ANY PARTICULAR PURPOSE, OR
NON-INFRINGEMENT OF THE THIRD PARTYS RIGHT.
Disclaimer of Warranty
IN NO EVENT SHALL MATSUSHITA ELECTRIC INDUSTRI-
AL CO,. LTD. BE LIABLE TO ANY PARTY OR ANY PERSON,
EXCEPT FOR REPLACEMENT OR REASONABLE MAINTE-
NANCE OF THE PRODUCT, FOR THE CASES, INCLUDING
BUT NOT LIMITED TO BELOW:
(1) ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIMI- TATION, DIRECT OR INDIRECT, SPECIAL, CONSE-
QUENTIAL OR EXEMPLARY, ARISING OUT OF OR
RELATING TO THE PRODUCT;
(2) PERSONAL INJURY OR ANY DAMAGE CAUSED BY INAPPROPRIATE USE OR NEGLIGENT OPERATION OF
THE USER;
(3) UNAUTHORIZED DISASSEMBLE, REPAIR OR MODIFI- CATION OF THE PRODUCT BY THE USER; (4) ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE,
OR LOSS OR DAMAGE, ARISING OUT OF THE SYSTEM
COMBINED BY THE DEVICES OF THIRD PARTY.
ENGLISH 
						

							4
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the ma\
nufacturers instructions.
8) Do not install near any heat sources such as radiators, heat registers, \
stoves, or other apparatus (including amplifiers) that
produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug\
. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third groundi\
ng prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your ou\
tlet, consult an electrician for replacement of the obs o-
lete outlet.
10) Protect the power cord from being walked on or pinched particularly at p\
lugs, convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by th\
e manufacturer, or sold with the apparatus. When a c art
is used, use caution when moving the cart/apparatus combination to avoid\
 injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long pe\
riods of time.
14) Refer all servicing to qualified service personnel. Servicing is require\
d when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or\
 objects have fallen into the apparatus, the appa-
ratus has been exposed to rain or moisture, does not operate normally, o\
r has been dropped.
S3125A 
						

							5
Limitation of Liability  ........................................................................\
........................................................... 3
Disclaimer of Warranty  ........................................................................\
................................ ....................... 3
Important Safety Instructions ........................................................................\
......................... ..................... 4
Preface ................................................................\
....................................................... ................................ 6
Features ...............................................................\
....................................................... ................................ 6
Precautions ............................................................\
....................................................... .............................. 6
Major Operating Controls and Their Functions ........................................................................\
........... ........ 7
Battery Loading & Replacement  ........................................................................\
......................... ............... 9
 Loading ................................................................\
....................................................... ......................... 9
 Replacement ............................................................\
....................................................... ..................... 9
Connecting and Disconnecting the Headset Plug  ........................................................................\
......... .... 9
Operating Procedures  ........................................................................\
.................................. ...................... 10
 Communications with Customers (TALK) ........................................................................\
.................. ... 10
 Communications with Other Store Personnel (PAGE)  ........................................................................\
.. 10
 Control of the device control terminals ........................................................................\
............... .......... 11
 Double-Drive-Thru connections  ........................................................................\
......................... .......... 11
 Manager Mode (Only one Headset) ........................................................................\
....................... ...... 12
 Canceling the Manager Mode  ........................................................................\
........................... ..........12
 Auto-Talk-Lock setup (for only one Headset) ........................................................................\
........... .... 13
Setup Procedures ........................................................................\
...................................... ......................... 14
 Opening the Switch Compartment  ........................................................................\
........................ ....... 14
 DIP Switch Setup  ........................................................................\
...................................... .................... 14
 ID Registration  ........................................................................\
....................................... ....................... 15
 Deletion of ID  ........................................................................\
........................................ ........................ 15
Troubleshooting........................................................................\
................................................................... 16
Specifications .........................................................\
....................................................... ............................. 17
Standard Accessory  ........................................................................\
.................................... ....................... 18
Optional Accessories  ........................................................................\
.................................. ....................... 18
CONTENTS 
						

							6
Preface
Order Taker WX-T3020 is exclusively designed for Panasonic Wireless Comm\
unication System, which is used with drive-thru
menu boards, etc. By using optional Headset WX-H3027, users can communicate with other store personnel and customers\
.
Features
• This Order Taker can be used with Center Module WX-C3010.
• 1.9 GHz DECT* is used with this Order Taker to prevent the interference \
from microwave ovens or wireless LAN used with2.4 GHz DECT.
*Digital Enhanced Cordless Telecommunications
• Manager mode It is possible to set the manager mode to one of the Order Takers regist\
ered in the center module. A person using this Order
Taker has the priority of communication.
• It is possible to select Direct Lane or A/B Lane according to double-dri\
ve-thru layouts.
• It is possible to select the Talk-Lock or Press-To-Talk mode.
• It is possible to select the Page-Lock or Press-To-Page mode.
Precautions
• Use only Battery WX-B3030.
• Follow the instructions of battery for care and handling.
• In combination with this product, refer to Battery Charger WX-Z3040 Oper\
ating Instructions.
• To prevent damages, unplug Headset WX-H3027 from Order Taker WX-T3020 when storing these products.
• Use the headset with the earphone pad attached. Otherwise, voice may bec\
ome distorted or you may have difficulty in hear- ing the voice. 
• Turn off the Order Taker when not in use, in order to save the battery l\
ife.
• Do not use this product if you use an implanted electric medical equipme\
nt. That may cause the equipment to malfunction. 
						

							7
EJECT
+
q
!4
!3
!1 !2
\bt r e \f
ui
o
!0
+
–
VOL
Major Operating Controls and Their Functions 
						

							8
qBattery Lock [EJECT]
When removing the battery, slide out the lock.
When loading a battery, insert the battery until the lock
clicks.
Please note the direction that inserts the battery.
\f Talk 1 Button [T1]
This button controls communications with the customer.
When the button is released, you can hear any customer
who is at the menu-board.
While the button is held down in the Press-To-Talk
mode, you can speak to the customer.
When the button is pressed in the Talk-Lock mode, you
can speak to the customer until you press the button a
second time.
e Talk 2 / A/B Lane Selection Button [T2, A/B]
This button can be set to two functions by the DIP switch
setting. Refer to P.14 DIP Switch Setup.
[T2]
This button controls communications with the customer
on Lane B of double-drive-thrus.
When the button is released, you can hear any customer
who is at the menu board.
While the button is held down in the Press-To-Talk
mode, you can speak to the customer who is at the
menu board.
When the button is pressed in the Talk-Lock mode, you
can speak to the customer until you press the button a
second time.
[A/B]
This button switches from Lane A to B and vice versa.
The lane indicator i displays the selected lane in yellow
(A) or green (B).
r Page Button [P]
This button controls communications with store person-
nel.
When the button is released, you can hear the communi-
cations among store personnel.
While the button is held down in the Press-To-Page
mode, you can speak to store personnel.
When the button is pressed in the Page-Lock mode, you
can speak to the store personnel until you press the but-
ton a second time.
t Optional Function Button [R]
This button is intended for functional extension. 
When the Order Taker is set in the manager mode and
this button is pressed, operation cannot be forwarded
for talking or paging. At that time, the Telephone
Indicator of the Center Module lights. 
To recover the talk or page operation, press this button
again.
The Telephone Indicator is turned OFF and the talk and
page operation becomes possible. \b
External Device Control Button [C]
Press and hold the C button to turn on the external
device.
u Power Indicator
The indicator shows the status as follows.
Green: Power is supplied, and the unit is operating.
Green blinking: Power is supplied and Manager mode
is activated.
Red: The battery requires recharging.
Red blinking: ID is not registered, or the center module
is set to the ID Registration mode.
i Lane Indicator
Lights yellow or green to indicate which the lane is in
operation.
Yellow: Lane A is selected.
Green: Lane B is selected.
Yellow blinking: Lane A is being selected, and either
the Talk or Page mode is activated.
Green blinking: Lane B is being selected, and either
the Talk or Page mode is activated.
o Volume Control Buttons [ ]
Pressing the respective buttons will increase or
decrease the sound level.
!0 Power Button [POWER]
Pressing the button will turn the Order Taker on.
Pressing the button again for 2 seconds or more will turn
the Order Taker off. 
!1 Earphone Output Jack
This jack is used for connection with the Panasonic WX-
H3027 Headset.
!2 Microphone Input Jack
This jack is used for connection with the Panasonic WX-
H3027 Headset.
!3 Switch Compartment
Do not open the cover of this compartment. It should be
opened only by qualified service personnel or system
installers.
!4 Battery (Optional accessory)
Refer to p. 6 Precautions.
+  VOL  – 
						

							9
When inserting the battery, check the 
positive and negative sides.
Do not hold the cable.
Do not pull this
part up and down.
Battery Loading & Replacement
Notes:• Refer to the operating instructions included with the bat- tery and battery charger.
• Prepare a fully charged battery.
• Battery replacement is recommended when the power indicator lights up in red and a constant beep is heard in
the headset.
 Loading
Insert the battery as shown in the figure.
Note: Be sure to insert it until the lock clicks.
Replacement
1. Slide the battery lock down.
2. Remove the battery.
\f
q
Connecting and Disconnecting the Headset Plug
When connecting the headset plug to this product, hold the
plug and push it straight into the earphone output jack and
microphone input jack.
When disconnecting the headset plug from this product,
hold the plug and pull it straight out.
Do not hold the cable or pull the plug up and down.
Doing so may cause trouble.
Pull/insert the plug straight, 
holding this part. 
						

							10
Communications with Other
Store Personnel (PAGE)
Store personnel wearing the headset can communicate with
each other without being heard by customers.

1. Hold down the P button and speak into the microphone
of the headset at a normal level. 
2. Release the button. Your voice will not be heard by the other store personnel.

1. Press the P button and speak into the microphone ofthe headset at a normal level. 
2. Press the P button again. The lock will be released, and your voice will not be heard by the other store person-
nel.
Note: A maximum of 4 operators can have a conversation at
the same time.
 Communications with
Customers (TALK)
Any store personnel wearing the headset can communicate
bidirectionally with any customer who is at the menu board.
1. Select a proper sound level by pressing the button  or .
2. You will hear a beep in the headset when a vehicle arrives at the menu board.

1. Hold down the T1 button and speak to the customer.A short beep is heard in the headset.
2. Release the button. Your voice is not heard by the cus- tomer.

1. Press the T1 button and speak to the customer.A short beep is heard in the headset.
2. Press the button again. The lock is released, and your voice is not heard by the customer.
Operating Procedures
+  VOL  –
Hold down
Release
Press
Press again
Press
Press again
Hold down
Release