Panasonic Pt Fw100ntu Projector Quickstart Guide

							[Wireless Manager ME 4.5] :
This software is used to send screen images from a computer to the projector via
a  wireless  or  wired  LAN.  When  installing  this  software,  follow  the  instructions  on
the screen.
[Installation Free Set Up] :
Although  some  are  impossible,  you  can  use  the  basic  functions  of  Wireless
Manager ME 4.5 without installing it in the computer.When using Wireless Manager ME 4.5 without copying the program
Click [Direct CD-ROM Startup] to launch Wireless Manager ME 4.5.
When copying Wireless Manager ME 4.5
(1) Click [Other Media Source Startup, Make Copy Here]. 
(2) Select the destination to save, and click [OK].
(3) Double-click the Wireless Manager ME 4.5 icon (WMstart.exe) in the destination to launch Wireless Manager ME 4.5.
[Operating Instructions] : 
The “Network Function Edition for Windows” and “Secondary Display Transmission
Function  Advanced  Operation  ”  documents  are  stored  in  the  supplied  CD-ROM  in
PDF  file  form.  To  see  them,  Adobe  Reader  (URL:  http://www.adobe.com/)  is
required. Click on a desired document name on the displayed list.
Network Function Quick Guide
(PT-F100NTU/PT-F100NTE/PT-F100NTEA)
(PT-FW100NTU/PT-FW100NTE/PT-FW100NTEA)
TQDJ19062-1 (En)  M0307-2067
OS: Microsoft  Windows  2000  Professional/XP  Home  Edition/XP  Professional
Microsoft  Windows  VistaTMUltimate  32  bit/VistaTMBusiness  32  bit
Microsoft Windows VistaTMHome Premium 32 bit/VistaTMHome Basic 32 bit
CPU: Intel
®Pentium®III 600 MHz or faster or compatible processor 
(800 MHz or faster is recommended when using live mode)
RAM: 256 MB or more
Empty hard disk capacity:60 MB or more
Web browser: Internet Explorer 6.0 or newer
Netscape Communicator 7.0 or newer
Hardware conditions:CD or DVD drive
Wireless or wired LAN function
Wireless LAN: An 802.11 b/g built-in wireless LAN system or an 802.11 b/g wireless LAN
adaptor must be installed and running properly. However, some 802.11 b/g
wireless LAN may not allow connection to 802.11 g projectors.
When your computer has no built-in wireless LAN function, a wireless LAN
card driver must be installed and recognized properly.
(Wireless  LAN  cards  that  system  operation  capabilities  are  confirmed  :
Access http://panasonic.co.jp/pavc/global/projector/)
If Network Bridge in Windows XP or firewall in Windows XP SP1 or later is
enabled,  this  will  prevent  a  wireless  connection.  For  details,  see  “Network
Function Edition for Windows ” in the supplied CD-ROM.
Wired LAN: A  built-in  LAN  terminal  (10BASE-T,  100BASE-TX  or  1000BASE-T)  or  a
wired LAN adaptor must be running properly.
A  LAN  cable  to  connect  must  be  compatible  with  category  5  or  above
(category  5e  or  above  when  using  1000BASE-T).  Consult  your  system
administrator when selecting a straight or crossover type.
Other: When  security  (firewall)  software  and  utilities  for  network  cards  are
installed, these may prevent connection of the projector.
� System requirements
• Before installation, see  “System requirements” at the upper right of this guide.
• Shut  down  all  software  currently  active  on  Windows.  Otherwise,  installation  may  not be possible.
• Administrator authority is required for installation.
• If  Wireless  Manager  mobile  edition  (henceforth  abbreviated  to  “ME”)  1.0,  2.0  or  3.0
has been installed, uninstall it. (See the bottom left of this guide)
Set the supplied CD-ROM in the CD or DVD drive.1
Click a software or function name button.2
• Note  that  operation  is  not  guaranteed  when  used  with  system  environments  other  than  the above or on homemade computers.
• Operation is not guaranteed for all computers that meet the above condit\
ions.
• Operation is not guaranteed for all wireless LAN cards and built-in wire\
less LAN adaptors.
• It is forbidden to take the projector outside the country or region where you purchased it, so use  it  only  in  the  said  country  or  region.  Also,  note  that  depending  on  countries  or  regions
there  are  restrictions  on  the  channels  and  frequencies  at  which  you  can  use  the  wireless
LAN.
• You must agree to the  “Software Licensing Agreement” to use the supplied software. Please
read it carefully when it is displayed during installation.
Installing the software and viewing the operating instructions
• The  installer  starts  up automatically  and  the
screen at right appears. 
• 
If  the  installer  does  not  start
up  automatically,  double-
click  [EasyInstall]  →
[Easy_Inst.exe]  in  the  CD-
ROM.
• Microsoft  and  its  logo  as  well  as  Windows  and  Windows  VistaTM   are  either  registered  trademarks  or  trademarks  of
Microsoft Corporation in the United States and/or other countries. 
• Intel  and  Pentium  are  registered  trademarks  or  trademarks  of  Intel  Corporation  or  its  affiliates  in  the  United  States  and  other
countries.
• Adobe Reader is a trademark of Adobe Systems Incorporated.
URL : http://panasonic.co.jp/pavc/global/projector/
Detailed connection 
(searching for a projector
on the computer)
Using network functions                                                 \
                                                  The projectors illustrated as examples are PT-F100NTU.
� Easy wireless set up 
For details of usage, see  “Network Function Edition for Windows ” in the supplied CD-ROM.

Used for normal presentations.


Moving  the  cursor  outside  the
computer screen with the mouse

When the user
name setting
window
appears
Set  the  icon  and  user  name,
and click [OK].
When the
confirmation
dialog window
appearsWhen the network
adaptor selection
window appears
(1) Select  the  adaptor  from  the  list
and click [OK]
(2) If the confirmation dialog window appears, click [YES] 
(3) Set the icon and user name, and click [OK].
Simple connection 
(searching for a computer
on the list displayed by
the projector)
(1) In [Network], select the samenetwork  number  as  is
displayed  in  the  [WIRELESS
LAN]  menu  of  the  projector
to connect.
(2)  Select  the  projector  to
connect.
(3) Click [OK].
(1) 
Turn  on  the  power  to  the
projector unit.
(2)  Press  the  [COMPUTER
SEARCH]  button  on  the
remote control.
(3) Select from the list displayed by the projector an item with
the  same  icon/name  as  is
displayed on the computer. (1) Click [YES].
(2) Set the icon and user name,
and click [OK].
� Other examples of usage


     
See “Network Function Edition for Windows ” in the supplied CD-ROM.
 
If the icon and user name have already been set, the setting window does\
 not appear. Go to step 2.
1 Launch Wireless Manager ME 4.5.
2 Select [Simple] or [Detailed] and follow the steps below.
3 Click [Live] on the launcher.
Access point (AP)LAN
Screen before
operation
Screen after
operation
Wireless Manager ME 4.5 can be installed with Windows VistaTM, but the
secondary display transmission function cannot be used.
Windows
� Wired LAN connection
10BASE-T,
100BASE-TX,
1000BASE-TNetwork  settings  of  the  projector
and the computer are required. 
See  “Network Function Edition for
Windows”   in  the  supplied  CD-
ROM.
Hub
LAN cable 
(straight, 
100 m or less)  LAN cable 
(straight, 
100 m or less) 
Uninstalling Wireless Manager ME 1.0, 2.0 or 3.0:
From the desktop, select [Start] 
→
[All Programs]  →
[Panasonic Wireless Display]  →
[Uninstall
Wireless Manager mobile edition  . ], and follow the instructions on the screen.
( . is 1.0, 2.0 or 3.0.)

The small-screen
layout is the example
of PT-F100NTU.
ENGLISH

 8FO@52%+@
 
 
 
 1.