Samsung 943snx User Manual

							6. MagicRotation does not provide support for 24 bits per pixel (Bit depth/Color Quality).
7. If 
you are 
changing your Graphic Card it is recommended that you uninstall the Magi-
cRotation Software before doing so.
System Requirements
OS
• Windows 98 SE
• Windows ME
• Windows NT 4.0
• Windows 2000
• Windows XP Home Edition
• Windows XP Professional
• Windows Vista™
Hardware
• 128 MB Memory above (recommended)
• 25 MB Hard disk space above
Service Packs
• It is recommended that your System has the latest Service Pack installed.
• For Windows ®
‚ NT 4.0, it is recommended to install Internet Explorer 5.0 and above with
Active Desktop component.
For more information, visit the MagicRotation website.
Windows ®
‚ is registered trademark of Microsoft Corporation,Inc. Uninstall
The MagicRotation  program 

can be removed only by using the "Add or Remove Programs"
option of the Windows ®
 Control Panel.
Perform the following steps remove MagicRotation.
1. Go to [Task Tray]  → [Start] → [Settings] and select [Control Panel] in the menu. If the
program runs on Windows ®
 XP, go to [Control Panel] in the [Start] menu.
2. Click the "Add or Remove Programs" icon in Control Panel.
3. In the "Add or Remove Programs" screen, scroll down to find "MagicRotation." Click on it to highlight it.
4. Click the "Change/Remove" button to remove the program.
5. Click "Yes" to begin the uninstall process.
6. Wait until the "Uninstall Complete" dialog box appears. Using the Software
41
Downloaded from ManualMonitor.com Manual± 
						

							7. After uninstall restart the system to complete the uninstallation.
 Note
Visit the  MagicRotation 
website for technical support for MagicRotation, FAQs (questions and
answers) and software upgrades.
Windows ®
‚ is registered trademark of Microsoft Corporation,Inc Using the Software
42
Downloaded from ManualMonitor.com Manual± 
						

							Adjusting the Monitor
{943SN/943SNX} Direct Functions
AUTO
When the AUTO button is pressed, the auto adjustment screen appears as\
 shown in the
animated screen on the center.
Auto adjustment allows the monitor to self-adjust to the incoming Analog\
 signal. The values
of Fine, Coarse and Position are adjusted automatically.
If auto adjustment does not work properly, press AUTO button again to \
adjust picture
with more accuracy. If you change resolution in the control panel, auto function will be exe\
cuted automatically.
OSD Lock & Unlock When pressing the AUTO button after locking the OSD 
						

							When pressing the MENU button after locking the OSD
This is the function that locks the OSD in order to keep the current sta\
tes of settings or prevent
others from adjusting the current settings.
Lock : Hold down the MENU button for more than five (5) seconds to act\
ivate the OSD ad-
justment lock function.
Unlock : Hold down the MENU button for more than five (5) seconds to d\
eactivate the OSD
adjustment lock function. Adjusting the Monitor 
						

							 Note
Though the OSD adjustment lock function is activated, you can still adju\
st the brightness and
contrast, and adjust Customized Key ( ) using the Direct button.
Customized key You can customize key assignment for the Custom button according to your\
 preferences.
To view the operating screen displayed when pressing the [ 
 ] button after configuring the
customized key for a function, click the name of each function.
(Image Size - MagicBright - MagicColor - Color Effect)  Note
You can configure the customized key for a required function via  Setup > Customized
Key. Adjusting the Monitor 
						

							Brightness
When OSD is not on the screen, push the Brightness ( ) button to adjust brightness.
OSD Function Picture
BrightnessContrastMagic-
Bright Color
MagicColorColor ToneColor Con-
trolColor Effect
Gamma Image
CoarseFineSharpnessH-PositionV-Position OSD
LanguageH-PositionV-PositionTranspar-
encyDisplay
Time Setup
ResetCustom-
ized KeyOff Timer
Image Size  Information
 Picture
Brightness (Not available in  MagicBright  mode of Dynamic Contrast.)Adjusting the Monitor 
						

							You can use the on-screen menus to change the brightness according to pe\
rsonal prefer-
ence.
MENU → 
 →   →   ,   → MENU
Contrast (Not available in  MagicBright mode of Dynamic Contrast.) You can use the on-screen menus to change the contrast according to pers\
onal preference.
( Not available in 
MagicColor mode of Full and Intelligent. )Adjusting the Monitor 
						

							MENU →   →   ,   →   →   ,   → MENU
MagicBright Push the   button to circle through available preconfigured modes.
MagicBright is a new feature providing optimum viewing environment depending on the\
contents of the image you are watching. Currently seven different modes \
are available:  Cus-
tom,  Text,  Internet,  Game, Sport, Movie and  Dynamic Contrast . Each mode has its own
pre-configured brightness value. You can easily select one of seven sett\
ings by simply press-
ing Customized Key control button.
• Custom
Although the values are carefully chosen by our engineers, the pre-confi\
gured values may
not be comfortable to your eyes depending on your taste.
If this is the case, adjust the brightness and contrast by using the OSD\
 menu.
• Text
For documents or works involving heavy text.
• Internet
For working with a mixture of images such as texts and graphics.
• Game
For watching motion pictures such as a game.
• Sport
For watching motion pictures such as a sport.
• Movie Adjusting the Monitor 
						

							For watching motion pictures such as a DVD or Video CD.
• Dynamic Contrast
Dynamic Contrast automatically detects the distribution of the visual signal and
adjusts to create optimum contrast.
MENU →   →   ,   →   →   ,   → MENU
 Color
(Not available in  MagicBright mode of Dynamic Contrast.)
MagicColor MagicColor is a new technology that Samsung has exclusively developed to improve d\
igital
image and to display natural color more clearly without disturbing image\
 quality.
•
Off - Returns to the original mode.
• Demo - The screen before applying  MagicColor appears on the right and the screen after
applying  MagicColor appears on the left.
• Full - Displays not only vivid natural color but also more realistic natural\
 skin color with
clearness.
• Intelligent - Displays vivid natural color with clearness.
MENU →   ,   →   → →   ,   → MENU
Adjusting the Monitor 
						

							Color Tone
The tone of the color can be changed and one of four modes can be select\
ed.
•
Cool - Makes whites bluish.
• Normal - Keeps whites white.
• Warm - Makes whites reddish.
• Custom - Select this mode when you want to adjust the image according to your \
prefer-
ences.
( Not available in  MagicColor mode of Full and Intelligent. )
MENU →   ,   →   →   ,   →   →   ,   → MENU
Adjusting the Monitor