Sanyo Lp Xm150 Projector Specifications
Have a look at the manual Sanyo Lp Xm150 Projector Specifications online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 550 Sanyo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Specifications Product Number LP-XM150 (W) LP-XM100 (W) System RGB liquid crystal shutter projection system Size 0.8 inch x 3, Aspect Ratio 4:3 LCD Panel Pixel Count 786,432 (1024 x 768) x3, Total pixels 2,359,296 Projection Lens Power-driven zoom (1 - 1.7x), f=26.9 to 45.4, F = 1.8 to 2.3 Light Source 330W 275W Screen Size (Projection Distance) 40” – 400” 1.3m– 22.9m 100”: 3.4m - 5.7m (Projection distance varies depending on the lens) Color Reproducibility (When projecting video signal) Full color (1.07 billion colors) Contrast Ratio (Full On/Full Off)*1 1000:1 Brightness*1 6,000 ANSI lumens 5,000 ANSI lumens Uniformity 90% Audio Output and Speaker 7W mono 4cm (circular) x1 Scanning Frequency Horizontal: 15 - 100kHz, Vertical: 48 - 100Hz, Dot Clock: 140 MHz or less Resolution (resizing) (when using RGB signal) 1024 x 768 dots (WUXGA dot resizing possible) PC Input KDigital input (x 1); DVI-D (HDCP compatible) KAnalog RGB input (x 2); D-sub 15; BNC 5-type Te r m i n a l s Video Input KVideo input (x 3); BNC 3-type (VIDEO/Y-Pb/Cb-Pr/Cr), RCA 3-type (Y/VIDEO-Pb/Cb -Pr/Cr), S-video Graphical Output KAnalog RGB (x 1); D-sub 15*2 Audio Input/Output KAudio input ; Stereo mini jack x2,RCA (L, R) x 1 KAudio output; Stereo mini jack x1 Controller Input/Output, and Other KControl port (x 1); D-sub 9 KUSB terminal; type B x 1*3 KWired remote control connection terminal; Mini jack x1 KWired LAN; RJ45 (100Base-TX/10Base-T) Operating Temperature 5 - 40°C Power Consumption 490W Standby: 0.35W/18W (Eco/Network) T. B . D Power Source AC 100V (±10%), 50/60Hz Dimensions 489.5mm (w) x 164.0mm (h) x 434.8mm (d) (Including lens) We i g h t 9.7kg Main Accessories Removable power cord x1 Power plug adaptor USB cable x1 D-sub 15 cable x1 Warranty PIN code-locking seal Owner’s manual Remote control x1 (AAA battery x 2) *1 Figures shown are as of the time of shipping, and listed in accordance with pattern for data projectors JIS X 6911:2003. Measurement method/conditions are based on Appendix 2. *2 For analog signals only. Partial restriction is set up for output signals. Not all types of input signals are supported. *3 USB interface does not guarantee that every USB device is compatible. * All product names and company names are trademarks or registered trademarks of their respective companies. * Product appearance and specifications are subject to change without notice.