Sanyo Pdg Dwt50l Projector Specifications

							4500 ANSI LUMENS z TRUE WXGA z MULTIMEDIA PROJECTOR 
 
Issued 11/07 © 2007 SANYO 
 
 PDG-DWT50L 
   WXGA Tabletop Multimedia Projector                                   
     A TABLETOP WITH WIDE RESOLUTION 
Offering a wide XGA full (1280 x 768) projection, the PDG-DWT50L makes 
it possible to project high-quality HD images from nearly any location. The 
PDG-DWT50L, a DLP projector, with its combination of BrilliantColor™ 
and six-segment color wheel (optional), offers true color reproduction.  
(The contrast ratio is a high 2100:1 with DynamicBlack™.) 
 
NETWORK CONTROL / ADMINISTRATION 
SANYO’s standard RJ45 LAN feature allows for control and administration 
of a projector via a network. Projector status can be monitored and 
projector functions can be controlled through a web browser.  A notification 
can be automatically sent via e-mail whenever the projector encounters a 
problem, allowing the administrator to act quickly to resolve any issues. 
 
HELPFUL MAINTENANCE FUNTIONS 
The lamp and filter maintenance functions assist in the proper 
maintenance of the PDG-DWT50L projector.  Easy maintenance access is 
provided for lamp and color wheel replacement. 
 
EASY POWER OFF AND ON START 
The Easy Power Off function allows the projector to be turned off (even 
when projecting an image) using a power strip equipped with a switch and 
a breaker.  The On Start function allows the projector to be turned on by 
supplied AC power. 
 
DUAL LAMP CONTROL SYSTEM 
The two-lamp total control system offers high brightness, improves lamp 
life and energy savings, along with redundancy. The power management 
function shuts the PDG-DWT50L off when input is not detected and helps 
maintain lamp life. 
 
BAYONET-STYLE EASY LENS REPLACEMENT 
The easy lens attachment (included) makes installation and removal of the 
optional lenses quick and easy by a one-touch release button. 
 
                   
 
                                                             DLP® and the DLP logo are registered  
                  trademarks of Texas Instruments.  
                  BrilliantColor™and DynamicBlack™ are  
                  trademarks of Texas Instruments. 
  
   
 
 
Specifications  Resolution WXGA (1280 x 768) Brightness (typical) 4500 ANSI Lumens Uniformity 85%(Center to Corner) DMD Panel System 0.65” Single DLP® Chip Number of Pixels 983,040  Contrast Ratio 2100:1 (with DynamicBlack™ ) Projection Image (diagonal) 40”-500” (Dependent on Lens) Aspect Ratio 15:9 Throw Distance Dependent on Lens Zoom/Focus Dependent on Lens Power Lens Shift Up/Down Ratio 1:1 – 5:-1 Left/Right Ratio 2:3 – 3:2   (Dependent on Lens) Digital Keystone Correction Vert. +/- 40°MAX, Horiz. +/- 35°MAX Projection Lens Optional Lens Throw Ratio Dependent on Lens Projection Lamp 260W UHP x 2 Scanning Frequency H 15kHz, 31-90kHz; V 50-85Hz  Dot Clock 170 MHz Color System PAL/PAL-M/PAL-N/SECAM/NTSC4.43/NTSC Computer Compatibility UXGA, SXGA+,SXGA, WXGA, XGA, SVGA, VGA, MAC Sound Output Two-piece stereo 3W  Voltage 100-240V AC; 50/60/Hz (auto sense/select) BTU Rating 2354.36(Dual lamp mode ) dB Rating 34 dB(eco mode) Power Consumption 690W Dimensions (WxHxD) 19.9”x7.6”x 15.2”(not including Protrusion & Lens) Net Weight 36.4 lbs.(w/o Lens) User Maintenance Clean air filters, replace lamp assembly Input Terminal Panel 1  D-Sub 15 x1 • Audio x1 (stereo mini jack) Input Terminal Panel 2 RGBHV or  Y/Cb/Cr (BNC x5) • Audio x1 (stereo mini jack) Input Terminal Panel 3 DVI-D x1(HDCP) • Audio x1 (stereo mini jack)  
Input Terminal Panel 4 Component Video (RCA x3)• L & R Audio (RCA x2)  Input Terminal Panel 5 Composite Video(RCA x1) • S-Video x1 
• L & R Audio (RCA x2) 
Additional Input Terminals Wired remote control jack x 1 (stereo mini jack) • USB x 1(typeB) • RS232C Control Port x 1 (D-sub9pin) 
• RJ45 LAN  • Remote control 15pin GPIO 
• Screen trigger x 1 
Output Terminals D-Sub 15 x 1 • Audio x1 (stereo mini-jack) Included Accessories Wired/Wireless I/R Remote Control  •VGA Cable  
• Batteries (two “AA”) • AC power cord • Wired remote 
cable • Lens cover  • Owner’s manual(CD-ROM & Quick 
Reference Guide) • Security Sticker 
Optional Accessories • Replacement Lamp (610 335 8406) 
• Replacement Remote (645 095 1992) 
• Optional Lenses (see below) 
• Optional 6 segment Color Wheel （POA-CW01） 
Warranty Three years parts and labor; 90 days lamp; Quick Repair Program under warranty  Because its products are subject to continuous improvement, SANYO reserves the right to 
modify product design and specifications without notice and without incurring any obligations. 
 
 
Optional Lens Specifications  
 
 
       
 On-Axis 
Short 
Fixed Short 
Zoom STD 
Zoom Long 
Zoom Ultra Long 
Zoom 
Part No.  LNS-W41  LNS-W40  LNS-S40  LNS-T40  LNS-T41 Zoom  No  Power Power Power  Power Throw 
Ratio 0.77:1 1.33-
1.79:1 1.78-
2.35:1 2.22-
4.43:1 4.43-8.3:1
F Stop  2.0  1.8-2.3  1.7-1.9  2.1-2.9  2.2-3.1 Length  5.2”  6.42” 5.43” 6.65”  6.06” Weight 2.2lbs 2.4lbs 1.8lbs 2.6lbs  2.0lbs   
21605 Plummer Street 
Chatsworth, CA  91311 
Ph: 888-337-1215 (toll-free) 
 Fax 818.717.2719 
www.sanyoprojectors.com
PRESENTATION TECHNOLOGIES
Lens sold separately