Toshiba Strata Se, Strata Vie General Description Manual

TABLE 29 
PROGRAM 104/106 
OTHER COMMON CARRIER AUTHORIZATION CODE LENGTHS #l and #2 
1) Lock in the SET switch on the HKSU. 
2) Depress the m key on station 13/l 7. 
3) Dial 0 =I(0 11) n the dial pad. 
4) Refer to the System Record Sheet. 
This program definesthe lengthsof the autho- 
rization codes for OCC #l & #2. These 2-digit 
numbers are entered via the dial pad. SET LED on. 
Station 13/17 LED 19 on. , 
System is in program mode. 
Normal functions halt on station 13/17. 
SPKR LED steady on. 
SPKR...

TABLE 30 
PROGRAM 108/l 09 
TOLL RESTRICTION OVERRIDE CODES #l and #2  PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
1) Lock in the SET switch on the HKSU. 
X = LED on 
All LEDs off = no data 
66) Transfer data into working memory per Par- 
NOTE. 
Program 5#W LED 13 enables stations to use Toll Restriction Qverride Codes 1 & 2. 
-56-  

TABLE 31 
PROGRAM 1X0 
TOLL RESTRICTION CLASS PARAMETERS 
( SET LED on. 
1) Lock in the 
SET switch on the HKSU. Station 13/17 LED 19 on. 
System is in program mode. 
2) Depress the m key on station 13/l 7. Normal functions halt on station 13/l 7. 
SPKR LED steady on. 
3) Dial aa 1 on the dial pad. 
4) Refer to the System Record Sheet. 
Using the various keys, turn their associated 
LEDs on or off, as required. The detailed 
meaning of each key/LED is shown below. 
NOTE. 
If any key/LED is not shown,.it...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 32 
PROGRAM 1 XY 
TOLL RESTRICTION CLASS AREA CODE ENTRY 
(LCD TELEPHONE REQUIRED) 
SET LED on. 
1) Lock in the SET switch on the HKSU. Station 13/l 7 LED 19 on. 
System is in program mode., 
Normal functions halt on station 13/l 7. 
LCD is blank. 
2) Depress the m key on station 13/l 7. SPKR LED steady on. 
3) Dia; 015 (Allow), iag(Deny) or flnl(Display) LCD is blank. 
SPKR LED flashes continuously. 
as required. (X = Restriction class 1 -...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 33 
PROGRAM 1XZ 
TOLL RESTRICTION CLASS OFFICE CODE ENTRY 
(LCD TELEPHONE REdRED) 
SET LED on. 
1) Lock in the SET switch on the HKSU. Station 13/17 LED 19 on. 
System is in program mode. 
Normal functions halt on station 13/l 7. 
LCD is blank. 
2) Depress the m key on station 13/l 7. SPKR LED steady on. 
LCD is blank. 
3) Dial OUj (Allow), OIa(Deny) or ~~~(Display) SPKR LED flashes continuously. 
as required. (X = Restriction class 1 - 4.)...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 34 
PROGRAM 2XY 
TOLL RESTRICTION AREA/OFFICE CODE EXCEPTION TABLE 
(LCD TELEPHONE REQUIRED) 
SET LED on. 
1) Lock in the 
SET switch on the HKSU. Station 13/l 7 LED 19 on. 
System is in program mode. s 
Normal functions halt on station 13/l 7. 
LCD is blank. 
2) Depress the m key on station 13/l 7. SPKR LED steady on. 
LCD is blank. 
3) Dial aafl (X 
q Table 1 - 8). LCD displays dialed number, then shifts left to pro- 
vide space for next...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 35 
PROGRAM 1X1 
TOLL RESTRICTION CLASS AREA/OFFICE CODE EXCEPTION TABLE SELECTION 
SET LED on. 
1) Lock in the SET switch on the HKSU. Station 13/l 7 LED 19 on. 
System is in program mode. ’ 
Normal functions halt on station 13/17. 
2) Depress the m key on station 13/l 7. SPKR LED steady on. 
3) Dial gailon the dial pad. (X = Restriction class 
SPKR LED flashes continuously. 
1 - 4, as defined in Program 6Xx.) 
The various LEDs indicate...

TABLE 36 
PROGRAM 1#00 
LEAST COST ROUTING HOME AREA CODE ENTRY 
(LCD EKT REQUIRED-STRATA Vie only)  PROGRAlWMlNG PROCEDURES 
SECTION 500-0~6-300 
JANUARY 1988 
SET LED on. 
1) Lock in the 
SET switch on the HKSU. Station 17 LED 19 on. 
System is in program mode. , 
Normal functions halt on station 17. 
LCD: PROGRAM MODE 
2) Depress the m key on station 17. SPKR LED steady on. 
LCD: PROGRAM NO.? 
3) Dial 1311 on the dial pad. SPKR LED flashes continuously. 
LCD: DATA = (indicates present data) 
4) Refer...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY1988 
TABLE 37 
PROGRAM l#OX 
LEAST COST ROUTING SPECIAL CODES 
(LCD EKT REQUIRED-STRATA Vie only) 
1) Lock in the SET switch on the HKSU. SET LED on. 
Station 17 LED 19 on. 
System is in program mode. 
Normal functions halt on station 17. 
I 1 LCD: PROGRAM MODE 
I 
2) Depress the m key on station 17. SPKR LED steady on. 
LCD: PROGRAM NO.? 
I 
3) Dial ilafl on the dial pad. X = 1 - 5 corre- SPKR LED flashes continuously. 
sponds to five different...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 38 
PROGRAM 1#06 
LEAST COST ROUTING PARAMETERS 
(LCD EKT REQUIRED-STRATA Vie only) 
SET LED on. 
1) Lock in the 
SET switch on the HKSU. Station 17 LED 19 on. 
System is in program mode. 
Normal functions halt on station 17. 
LCD: PROGRAM MODE 
2) Depress the m key on station 17. SPKR LED steady on. 
LCD: PROGRAM NO.? 
3) Dial i pa 1 on the dial pad. 
SPKR LED flashes continuously. 
LCD: (displays program number) 
Various LEDs indicate...