Toshiba Strata Se, Strata Vie General Description Manual

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUCIRY : 988 
TABLE 49 
PROGRAM 3XX 
STATION CO LINE ACCESS 
SET LED on. 
1) Lock in the SET switch on the HKSU. Station 13/l 7 LED 19 on. 
System is in program mode. 
Normal functions halt on station 13/l 7. 
2) Depress the m key on station 13/l 7. 
SPKR LED steady on. 
3) Dial 3flIon the dial pad (XX = the number of 
the station(s) to be programmed). SPKR LED flashes continuously. 
The CO LEDs indicate present data. 
4) Refer to the System Record Sheet....

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 50 
PROGRAM 3#XX 
HOXB, HMDB and HIOB ENABLE 
1) Lock in the SET switch on the HKSU. 13/l 7 LED 19 on. 
‘s in program mode. 
If the LED is already on, depressing the associated 
key 
will turn it off and vice versa. LEDs may be 
(if any key/LED is not shown, it is not turned off and on until the desired pattern is set. 
6B) Go to Step 2 in’a,“,ther program 
table 
or . . . 
6C) Transfer data into working memory per Par- 
agraph 02.06. 
SET...

TABLE 51 
PROGRAM 4XX 
STATION TYPE ASSIGNMENT 
(This program must be completed before Program 4#XX./ 
SET LED on. 
1) Lock in the SET switch on the HKSU. Station 13/17 LED 19 on. s 
System is in program mode. 
Normal functions halt on station 13/17. 
2) Depress the m key on station 13/l 7. SPKR LED steady on. 
3) Dial gag on the dial pad (XX = the number of 
SPKR LED flashes continuously. 
the station(s) to be programmed). The CO LEDs indicate present data. 
4) Refer to the System Record Sheet. An X on...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 52 
PROGRAM 4#XX 
STATION FLEXIBLE KEY ASSIGNMENTS 
(IMPORTANT! LCD EKT HIGHLY RECOMMENDED) 
(Do Program 4XX for all stations before this program.) 
SET LED 
on. 
1) Lock in the SET switch on the HKSU. Station 13/l 7 LED 19 on. 
System is in program mode. ’ 
Normal functions halt on station 13117. 
2) Depress the ‘m key on station 13/l 7. 
SPKR LED steady on. 
3) Dial gjfla on. the dial pad (XX = the number SPKR LED flashes continuously....

TABLE 53 
PROGRAM 5XX 
STATION CLASS OF SERVICE #1 PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY : 388 
1) Lock in the SET switch on the HKSU. 
Using the appropriate keys, turn their asso- 
ciated LEDs on or off, as required. If the LED is already on, depressing the associated 
key will turn it off and vice versa. LEDs may be 
, included 
All Call Page 
! Allowed 
Auto.Callback Warning Tone I Not Allowed 
Handsfree Answerback 
Disabled 
MIC on at start of call 
On 
MIC key lock 
Allowed...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 54 
PROGRAM 5#XX 
STATION CLASS OF SERVICE #2 
1) Lock in the SET switch on the HKSU. SET LED on. 
Station 13/l 7 LED 19 on. 
System is in program mode. 
Normal functions halt on station 13117. 
ciated LEDs on or off, as required. If a 
key/LED is not shown, it is not used. 
/ - 
09 Automatic Busy Redial Access 
Enable ! Disabled 
07 - 04 Automatic Off-hook Selection (94 - 91) 
Enable / Disabled 
03 
Automatic Off-hook Selection (COl)...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 55 
PROGRAM 6XX 
STATION TOLL RESTRICTION/LCR CLASSIFICATION 
1) Lock in the SET switch on the HKSU. 
this program 
. . . or . . . 
6B) Go to Step 2 in another program table 
. . or . . . 
6C) Transfer data into working memory per Par- 
agraph 02.06. SET LED goes off. 
Station 13/l 7 LED 19 goes off. 
New data is stored, previous data is erased. 
“NOTES. 
1. For multiple station programming, refer to Paragraph 02.20. 
2. See Toll...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 56 
PROGRAM 6#XX 
STATION-TO-STATION HUNTING 
1) Lock in the SET switch on the HKSU. 
2) Depress the m key on station 13/17. 
3) Dial igag on the dial pad (XX = the number 
of the station(s) to be programmed). 
4) Refer to the System Record Sheet. 
This program defines the station hunt desti- 
nation. Dial the 2-digit number using the dial 
pad. 
11 I 1 Steady 
10 1 Flash 1 Steady 1 
Binary Numbers: 1 2 3 4 5 6 7 8 9 0 
03 x x x 
X = LED on...

PROGRAMMING PdOCEDURES 
SECTION 500-036-300 
JANUARY 
1988 
TABLE 57 
PROGRAM 7XX 
STATION OUTGOING CALL RESTRICTION 
SET LED on. 
1) Lock in the 
SET switch on the HKSU. Station 13117 LED 19 on. , 
System is in program mode. 
Normal functions halt on station 13/17. 
2) Depress the m key on station 13/l 7. 
SPKR LED steady on. 
3) Dial Gaa on the dial pad (XX = the number of 
SPKR LED flashes continuously. 
the station(s) to be programmed). 
CO LEDs indicate present data. 
4) Refer to the System Record...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 58 
PROGRAM 81XX - 89XX 
CO RINGING ASSIGNMENTS (DAY/DAYZ/NIGHT) 
1) Lock in the SET switch on the HKSU. 
2) Depress the em key on station 13/17. 
3) Dial 3aafl on the dial pad (Y = 1 - 9”; XX = 
the number of station(s) to 
be programmed). 
4) RefeF to the System Record Sheet. 
Using the appropriate keys, turn their asso- 
ciated LEDs on or off, as required. 
l LED ON = Ringing assigned. 
l Each CO key/LED represents itself-that 
is, if...