Zenith 12 Xp Manual
View the Zenith 12 Xp Manual for free. All the Zenith manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.
![Page 3
Loading the Camera - Step by step instructions
Always load the camera in subdued light; if outdoors
shield from direct sunlight.
Make sure that the indicator on the Shutter Release Button
[3] is facing towards the front of the camera.
Depress Shutter Release Button [3] - if shutter does not fire
advance Transport Lever [2] in short strokes until it stops
and press Shutter Release Button [3] again.
Lift Rewind Knob [16] to open back.
Insert film cassette into Film Chamber [21]...](http://img.usermanuals.tech/thumb/5412/61145/w300_zenith_12-xp_d-2.png "Page 3
Loading the Camera - Step by step instructions
Always load the camera in subdued light; if outdoors
shield from direct sunlight.
Make sure that the indicator on the Shutter Release Button
[3] is facing towards the front of the camera.
Depress Shutter Release Button [3] - if shutter does not fire
advance Transport Lever [2] in short strokes until it stops
and press Shutter Release Button [3] again.
Lift Rewind Knob [16] to open back.
Insert film cassette into Film Chamber [21]...")
![Page 4
[22] slots ensuring that the second hole engages with a
tooth on the spool. Ease film forward by swat strokes of
Transport Lever [2] until it stops. The lower Sprocket Teeth
[26] should be properly engaged.
Fire shutter. Advance film by short strokes of transport
lever until both top and bottom sprockets are engaged. If
necessary tighten film on Take-up Spool [22] by turning
the flange at the base of the spool anti-clockwise with the
finger and in the...](http://img.usermanuals.tech/thumb/5412/61145/w300_zenith_12-xp_d-3.png "Page 4
[22] slots ensuring that the second hole engages with a
tooth on the spool. Ease film forward by swat strokes of
Transport Lever [2] until it stops. The lower Sprocket Teeth
[26] should be properly engaged.
Fire shutter. Advance film by short strokes of transport
lever until both top and bottom sprockets are engaged. If
necessary tighten film on Take-up Spool [22] by turning
the flange at the base of the spool anti-clockwise with the
finger and in the...")
All Zenith manuals
All Zenith manuals