Home > Acer > Projector > Acer K10 Dlp Users Guide

Acer K10 Dlp Users Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Acer K10 Dlp Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Acer Projector
    K10 Users Guide
    Downloaded From projector-manual.com Acer Manuals 
    						
    							Changes may be made periodically to the information in this publication without obligation 
    to notify any person of such revisions or changes. Such changes will be incorporated in new 
    editions of this manual or supplementary documents and publications. This company makes 
    no representations or warranties, either expressed or implied, with respect to the contents 
    hereof and specifically disclaims the implied warranties of merchantability or fitness for a 
    particular purpose.
    Record the model number, serial number, purchase date and place of purchase information in 
    the space provided below. The serial number and model number are recorded on the label 
    affixed to your computer. All correspondence concerning your unit should include the serial 
    number, model number and purchase information.
    No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in 
    any form or by any means, electronically, mechanically, by photocopy, recording or otherwise, 
    without the prior written permission of Acer Incorporated.
    Model number: __________________________________
    Serial number: ___________________________________
    Date of purchase: ________________________________
    Place of purchase: ________________________________ Copyright © 2008. Acer Incorporated.
    All Rights Reserved.
    Acer Projector K10 Users Guide
    Original Issue: 12/2008
    Acer Projector K10
    Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies 
    product names or trademarks are used herein for identification purposes only and belong to 
    their respective companies. 
    Downloaded From projector-manual.com Acer Manuals 
    						
    							iii
    Information for your safety and 
    comfort
    Read these instructions carefully. Keep this document for future reference. 
    Follow all warnings and instructions marked on the product.
    Turning the product off before cleaning
    Unplug this product from the wall outlet before cleaning. Do not use liquid 
    cleaners or aerosol cleaners. Use a damp cloth for cleaning.
    Caution for plug as disconnecting device
    Observe the following guidelines when connecting and disconnecting power to 
    the external power supply unit:
    •Install the power supply unit before connecting the power cord to the AC 
    power outlet.
    •Unplug the power cord before removing the power supply unit from the 
    computer.
    •If the system has multiple sources of power, disconnect power from the 
    system by unplugging all power cords from the power supplies.
    Caution for Accessibility
    Be sure that the power outlet you plug the power cord into is easily accessible 
    and located as close to the equipment operator as possible. When you need to 
    disconnect power to the equipment, be sure to unplug the power cord from the 
    electrical outlet.
    Warnings!
    •Do not use this product near water.
    •Do not place this product on an unstable cart, stand or table. If the product 
    falls, it could be seriously damaged.
    •Slots and openings are provided for ventilation to ensure reliable 
    operation of the product and to protect it from overheating. These 
    openings must not be blocked or covered. The openings should never be 
    blocked by placing the product on a bed, sofa, rug or other similar surface.
    This product should never be placed near or over a radiator or heat register, or 
    in a built-in installation unless proper ventilation is provided.
    •Never push objects of any kind into this product through cabinet slots as 
    they may touch dangerous voltage points or short-out parts that could 
    result in a fire or electric shock. Never spill liquid of any kind onto or into 
    Downloaded From projector-manual.com Acer Manuals 
    						
    							iv
    the product.
    •To avoid damage of internal components and to prevent battery leakage, 
    do not place the product on a vibrating surface.
    •Never use it under sporting, exercising, or any vibrating environment 
    which will probably cause unexpected short current or damage rotor 
    devices, lamp.
    Using electrical power
    •This product should be operated from the type of power indicated on the 
    marking label. If you are not sure of the type of power available, consult 
    your dealer or local power company.
    •Do not allow anything to rest on the power cord. Do not locate this 
    product where people will walk on the cord.
    •If an extension cord is used with this product, make sure that the total 
    ampere rating of the equipment plugged into the extension cord does not 
    exceed the extension cord ampere rating. Also, make sure that the total 
    rating of all products plugged into the wall outlet does not exceed the fuse 
    rating.
    •Do not overload a power outlet, strip or receptacle by plugging in too 
    many devices. The overall system load must not exceed 80% of the branch 
    circuit rating. If power strips are used, the load should not exceed 80% of 
    the power strips input rating.
    •This products power cord is equipped with a three-wire grounded plug. 
    The plug only fits in a grounded power outlet. Make sure the power outlet 
    is properly grounded before inserting the power cord plug. Do not insert 
    the plug into a non-grounded power outlet. Contact your electrician for 
    details.
    Warning! The grounding pin is a safety feature. Using a power outlet that is 
    not properly grounded may result in electric shock and/or injury.
    Note: The grounding pin also provides good protection from unexpected 
    noise produced by other nearby electrical devices that may interfere with 
    the performance of this product.
    •Use the product only with the supplied power supply cord set. 
    Downloaded From projector-manual.com Acer Manuals 
    						
    							v
    Product servicing
    Do not attempt to service this product yourself, as opening or removing covers 
    may expose you to dangerous voltage points or other risks. Refer all servicing to 
    qualified service personnel.
    Unplug this product from the wall outlet and refer servicing to qualified service 
    personnel when:
    •the power cord or plug is damaged, cut or frayed
    •liquid was spilled into the product
    •the product was exposed to rain or water
    •the product has been dropped or the case has been damaged
    •the product exhibits a distinct change in performance, indicating a need 
    for service
    •the product does not operate normally after following the operating 
    instructions
    Note: Adjust only those controls that are covered by the operating 
    instructions, since improper adjustment of other controls may result in 
    damage and will often require extensive work by a qualified technician to 
    restore the product to normal condition.
    Warning! For safety reasons, do not use non-compliant parts when adding 
    or changing components. Consult your reseller for purchase options.
    Your device and its enhancements may contain small parts. Keep them out of 
    the reach of small children.
    Additional safety information
    •Do not look into the projectors lens when the lamp is on. The bright may 
    hurt your eyes.
    •Turn on the projector first and then signal sources.
    •Do not place the product in following environments:
    • Space that is poorly ventilated or confined. At least 10cm clearance from walls 
    and free flow of air around the projector is necessary.
    • Locations where temperatures may become excessively high, such as inside of a 
    car with all windows rolled up.
    • Locations where excessive humidity, dust, or cigarette smoke may contaminate 
    optical components, shortening the life span and darkening the image.
    • Locations near fire alarms.
    • Locations with an ambient temperature above 35 ºC/95 ºF.
    • Locations where the altitudes are higher than 10000 feet.
    •Unplug immediately if there is something wrong with your projector. Do 
    not operate if smoke, strange noise or odor comes out of your projector. It 
    Downloaded From projector-manual.com Acer Manuals 
    						
    							vi
    might cause fire or electric shock. In this case, unplug immediately and 
    contact your dealer.
    •Do not keep using this projector if it is broken or you have dropped it. In 
    this case, contact your dealer for inspection.
    •Do not face the projector lens to the sun. It can lead to fire.
    •When switching the projector off, please ensure the projector completes 
    its cooling cycle before disconnecting power.
    •Do not touch air outlet grille and bottom plate which becomes hot.
    •Do not look into the air outlet grille when projector is operating. It may 
    hurt your eyes.
    •Do not block the projector lens with any object when the projector is 
    under operation as this could cause the object to become heated and 
    deformed or even cause a fire.
    •Do not attempt to disassemble this projector. There are dangerous high 
    voltages inside which may hurt you. Refer servicing only to suitable 
    qualified professional service personnel.
    •Do not stand the projector on end vertically. It may cause the projector to 
    fall over, causing injury or damage.
    Operating environment for using wireless (optional)
    Warning! For safety reasons, turn off all wireless or radio transmitting 
    devices when using your machine under the following conditions. These 
    devices may include, but are not limited to: wireless LAN (WLAN), Bluetooth 
    and/or 3G.
    Remember to follow any special regulations in force in any area, and always 
    switch off your device when its use is prohibited or when it may cause 
    interference or danger. Use the device only in its normal operating positions. 
    This device meets RF exposure guidelines when used normally, and it and its 
    antenna are positioned at least 1.5 centimeters (5/8 inches) away from your 
    body. It should not contain metal and you should position the device the above-
    stated distance from your body. 
    To successfully transmit data files or messages, this device requires a good 
    quality connection to the network. In some cases, transmission of data files or 
    messages may be delayed until such a connection is available. 
    Ensure that the above separation distance instructions are followed until the 
    transmission is completed. 
    Parts of the device are magnetic. Metallic materials may be attracted to the 
    device, and persons with hearing aids should not hold the device to the ear with 
    the hearing aid. Do not place credit cards or other magnetic storage media near 
    the device, because information stored on them may be erased.
    Medical devices
    Downloaded From projector-manual.com Acer Manuals 
    						
    							vii
    Operation of any radio transmitting equipment, including wireless phones, may 
    interfere with the functionality of inadequately protected medical devices. 
    Consult a physician or the manufacturer of the medical device to determine if 
    they are adequately shielded from external RF energy or if you have any 
    questions. Switch off your device in health care facilities when any regulations 
    posted in these areas instruct you to do so. Hospitals or health care facilities 
    may be using equipment that could be sensitive to external RF transmissions.
    Pacemakers. Pacemaker manufacturers recommend that a minimum separation 
    of 15.3 centimeters (6 inches) be maintained between wireless devices and a 
    pacemaker to avoid potential interference with the pacemaker. These 
    recommendations are consistent with the independent research by and 
    recommendations of Wireless Technology Research. Persons with pacemakers 
    should do the following:
    •Always keep the device more than 15.3 centimeters (6 inches) from the 
    pacemaker.
    •Not carry the device near your pacemaker when the device is switched on. 
    If you suspect interference, switch off your device, and move it.
    Hearing aids. Some digital wireless devices may interfere with some hearing 
    aids. If interference occurs, consult your service provider.
    Vehicles
    RF signals may affect improperly installed or inadequately shielded electronic 
    systems in motor vehicles such as electronic fuel injection systems, electronic 
    antiskid (antilock) braking systems, electronic speed control systems, and air bag 
    systems. For more information, check with the manufacturer, or its 
    representative, of your vehicle or any equipment that has been added. Only 
    qualified personnel should service the device, or install the device in a vehicle. 
    Faulty installation or service may be dangerous and may invalidate any 
    warranty that may apply to the device. Check regularly that all wireless 
    equipment in your vehicle is mounted and operating properly. Do not store or 
    carry flammable liquids, gases, or explosive materials in the same compartment 
    as the device, its parts, or enhancements. For vehicles equipped with an air bag, 
    remember that air bags inflate with great force. Do not place objects, including 
    installed or portable wireless equipment in the area over the air bag or in the 
    air bag deployment area. If in-vehicle wireless equipment is improperly 
    installed, and the air bag inflates, serious injury could result. 
    Using your device while flying in aircraft is prohibited. Switch off your device 
    before boarding an aircraft. The use of wireless teledevices in an aircraft may be 
    dangerous to the operation of the aircraft, disrupt the wireless telephone 
    network, and may be illegal.
    Potentially explosive environments
    Switch off your device when in any area with a potentially explosive 
    atmosphere and obey all signs and instructions. Potentially explosive 
    Downloaded From projector-manual.com Acer Manuals 
    						
    							
    viii
    atmospheres include areas where you would normally be advised to turn off 
    your vehicle engine. Sparks in such areas could cause an explosion or fire 
    resulting in bodily injury or even death. Switch off the device at refueling points 
    such as near gas pumps at service stations. Observe restrictions on the use of 
    radio equipment in fuel depots, storage,  and distribution areas; chemical plants; 
    or where blasting operations are in progress. Areas with a potentially explosive 
    atmosphere are often, but not always, clearly marked. They include below deck 
    on boats, chemical transfer or storage facilities, vehicles using liquefied 
    petroleum gas (such as propane or butane), and areas where the air contains 
    chemicals or particles such as grain, dust or metal powders.
    Hearing Protection
    To protect your hearing, follow these instructions.
    •Increase the volume gradually until you can hear clearly and comfortably.
    •Do not increase the volume level after your ears have adjusted.
    •Do not listen to music at high volumes for extended periods.•Do not increase the volume to block out noisy surroundings.
    •Decrease the volume if you cant hear people speaking near you.
    Disposal instructions
    Do not throw this electronic device into  the trash when discarding. To minimize 
    pollution and ensure utmost protection of the global environment, please 
    recycle. For more information on th e Waste from Electrical and Electronics 
    Equipment (WEEE) regulations, visit  http://www.acer-group.com/public/
    Sustainability/sustainability01.htm.
    Downloaded From projector-manual.com Acer Manuals 
    						
    							ix
    First things first
    Usage Notes
    Do:
    •Turn off the product before cleaning.
    •Use a soft cloth moistened with mild detergent to clean the projector 
    housing.
    •Disconnect the power plug from AC outlet if the product is not being used 
    for a long period of time.
    Dont:
    •Block the slots and openings on the unit provided for ventilation.
    •Use abrasive cleaners, waxes or solvents to clean the unit.
    •Use under the following conditions:
    •In extremely hot, cold or humid environments.
    •In areas susceptible to excessive dust and dirt.
    •Near any appliance that generates a strong magnetic field.
    •Place in direct sunlight.
    Precautions
    Follow all warnings, precautions and maintenance as recommended in this 
    users guide to maximize the life of your unit.
    Warning:
    •Do not look into the projectors lens when the lamp is on. The bright light may hurt 
    your eyes.
    •To reduce the risk of fire or electric shock, do not expose this product to rain or 
    moisture.
    •Please do not open or disassemble the product as this may cause electric shock.
    •When switching the projector off, please ensure the projector completes its cooling 
    cycle before disconnecting power.
    •Turn on the projector first and then the signal sources.
    Downloaded From projector-manual.com Acer Manuals 
    						
    							x
    Downloaded From projector-manual.com Acer Manuals 
    						
    All Acer manuals Comments (0)

    Related Manuals for Acer K10 Dlp Users Guide