Home
>
Addonics Technologies
>
HDD Duplicator
>
Addonics Technologies 13 Hard DriveSSD Duplicators HDUS3325DX user guide
Addonics Technologies 13 Hard DriveSSD Duplicators HDUS3325DX user guide
Here you can view all the pages of manual Addonics Technologies 13 Hard DriveSSD Duplicators HDUS3325DX user guide. The Addonics Technologies manuals for HDD Duplicator are available online for free. You can easily download all the documents as PDF.
Page 1
Technical Support If you need any assistance to get your unit functioning properly, please have your product information ready and contact Addonics Technical Support at: Hours: 8:30 am - 6:00 pm PST Phone: 408-453-6212 Email: http://www.addonics.com/support/query/ v3.1.11 www.addonics.com User Guide 1:3 HDD Duplicator Delux (HDUS3325DX) T E C H N O L O G I E S
Page 3
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ Note:Make sure that the capacity of the target hard disk is equ al or larger than the so urce hard di sk. For exampl e, on the label of the hard drives, it might identify bo th drives as 80GB but the actual size differs. And when this type of drives are used on the HDD duplicator, w hen you start dup licati ng, you wi ll rec eive a “Target Not Ready” error. To...
Page 4
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ initializes and go es through the IV. Duplicating a drive When the duplicator powers on, it initializes and go es through the steps below Shows the firmware version Initialize SDRAMs status.. Detect Drives status. Shows the first function: Copy HDD copies data di rectly from the source hard disk to the target hard disk. Press ENT button to begin copy. T he system...
Page 5
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ Functions The copy controller has 11 functi ons in total , with t he 11th (Adv Set up) being a hid den system function that only appears when the ESC key is pressed for 2 seconds until there is a beep. These are shown below. 10-01. L anguage 10- 02. C opy Size 10-03. Start up Menu 10-04. Auto Com pare 10-05. Butt on Sound 10-06. Device Info...
Page 6
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ Copy HDD Copy HDD copies data directly from the source hard disk t o the t arget hard disk. Pl ease make sure that the capacity of the target hard disk is equal or larger t han the source hard disk. Choose option 1 from the m enu: Press ENT to begin copy. The system w ill auto-detect the hard di sks and show the fo llowing copying info on t he LCD. The LCD w ill show the...
Page 7
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ 3. Compare HDD HDD: 11 232.9GB Press ENT to begin the comparison. The L CD will display the fol lowing info. Comp-23MB/s 0% 232.9GB 00:00:00 Once t he comparison is complete the LCD wi ll display t he following info as well as t he amount of data on the source hard disk. Compare OK:11 Fa il: 0 Dif: 0 PreScan S ourcePreScan HDD is used to check if...
Page 8
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ 6. ReScan BUS ReScan Bus Choose option 6 from t he menu: Press ENT to re-scan hardware. The LCD wi ll display the follo wing info. Re-Scan BUS NOW? Yes Wh en the scan is complete the L CD will display the fol lowing info. Bus re- scan OK ! 7. S ource Size Source Size Source Size is used to show the capacity of the source. Ch oose option 7 from the m...
Page 9
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ 10. Setup SetupSetup allows various system settings to be changed. There are 12 sub-opt\ ions: Language, Copy Size, Startup Menu, Auto Compare, Button Sound, Device In\ fo, System Info, Fast Copy, Auto Start Drive, Auto Start Timer, Tolerance Si\ ze and Boot Time Delay. Ch oose option 8 from the m enu: In Process Elapsed 01:00 9. Overwrite Overwrite...
Page 10
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ 10-02. Setup Copy Size Press ENT and the LCD will display a deta iled list of opti ons as shown below Use the Up and Down arrow keys t o choose dierent copy si zes. The system w ill oer their corresponding percentages so the user can specify t he amount to copy from the source hard disk. Press ENT to confrm and save the changes. C opy Size 100%~1 % (*MB)...