Home
>
Addonics Technologies
>
HDD Duplicator
>
Addonics Technologies 13 Hard DriveSSD Duplicators HDUSI3TDR user guide
Addonics Technologies 13 Hard DriveSSD Duplicators HDUSI3TDR user guide
Have a look at the manual Addonics Technologies 13 Hard DriveSSD Duplicators HDUSI3TDR user guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 299 Addonics Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Technical Support If you need any assistance to get your unit functioning properly, please have your product information ready and contact Addonics Technical Support at: Hours: 8:30 am - 6:00 pm PST Phone: 408-453-6212 Email: http://www.addonics.com/support/query/ v3.1.11 www.addonics.com User Guide 1:3 HDD Duplicator Pro (HDUSI3TDR) T E C H N O L O G I E S Duplicator Panel Source Drive Bay Target Drive Bay1 Power Switch Target Drive Bay2 Target Drive Bay3
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ Note:Make sure that the capacity of the target hard disk is equ al or larger than the so urce hard di sk. For exampl e, on the label of the hard drives, it might identify bo th drives as 80GB but the actual size differs. And when this type of drives are used on the HDD duplicator, w hen you start dup licati ng, you wi ll rec eive a “Target Not Ready” error. To resolve this issue, you n eed to decrease the drive size of the source dr ive. To do this, navigate to: 6.Setup > 6.2Copy Size and use the bu tton arrows to decr ease the drive size of the sour ce drive by increm ents of 1%. I. Installing drive into the HDD Duplicator For installin g a h ard drive o n the vari ous enclosures th at come wi t h th e HDD duplicator, refer to the bundled enclosure installation guides. Step 1 Once the hard drive is installed on the drive enclosure, slide in the Source drive into the drive ba y. Push down t he hand le and using the key provid ed, turn the key lock to the Lock position. Th is w ill secure the drive and turn on the power to the hard drive. Step 2 Slide in the Target drive into the drive ba y. Push down the han dle and usi ng the key provided, turn the key lo ck to the Lock positi on. Th is will secu re the dr ive and turn on the power to the hard dr ive. II. Connecting the power cable a nd power ing on a. Connect the power cord provided from the wall outlet to the back of the tower. b. A main power switch is located at the back o f the tower. Turn the switch on. Another auxiliary switch is located on the front of the tower. c. Push the auxiliary switch button to turn on the HDD duplicator. III. The Duplicator Panel T here are four buttons a nd an LCD on the pa nel of HDD Duplicator. 1 – LCD shows a function or a message. 2 – it is used to scroll up function menus. 3 – it is used to scroll down function menus. 4 – it is used to execute a function. 5 – it is used to cancel a function. Basic Instructions
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ initializes and go es through the IV. Duplicating a drive When the duplicator powers on, it initializes and go es through the steps below Shows the firmware version Initialize SDRAMs status.. Detect Drives status. Shows the first function: Copy HDD copies data di rectly from the source hard disk to the target hard disk. Press ENT button to begin copy. T he system wi ll aut o-detect the hard disks and show the following info on the LCD. T he LCD wi ll show the followi ng info duri ng the copying process: remaining time, completed percentage. The copy speed, ca pacity and time wi ll vary depending on the so urce hard di sk. Once the copyi ng process is complete t he LCD will display the followi ng results.
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ Functions The copy controller has 11 functi ons in total , with t he 11th (Adv Set up) being a hid den system function that only appears when the ESC key is pressed for 2 seconds until there is a beep. These are shown below. 10-01. L anguage 10- 02. C opy Size 10-03. Start up Menu 10-04. Auto Com pare 10-05. Butt on Sound 10-06. Device Info 10-07. System Info 10-08. Fast Copy 10. Setup 10-09. Auto Start Drive 10-10. Auto Start Timer 10-11. Toler ance Size Duplicator C ontroller 1. Copy HDD 2. Async C opy HDD 3. Compare HDD 4. Async Compare 5. PreScan Source 6. ReScan BUS 7. Source Size 11. Adv Setup 11-01. Read Error Skip 11-02. U pdate Firmware 11-03. Compare Firmware 11-04. Quick Erase HDD 11-05. Full Erase HDD 11-06. H/W Diagnostic 11-07. L oad Default 8. Secure Erase 9. Overwrite 10- 12. B ootTime Delay 10-13. Quick Com pare 11-08. Copy HPA 11-09. Burn In 10. Setup 11. Adv Set up
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ Copy HDD Copy HDD copies data directly from the source hard disk t o the t arget hard disk. Pl ease make sure that the capacity of the target hard disk is equal or larger t han the source hard disk. Choose option 1 from the m enu: Press ENT to begin copy. The system w ill auto-detect the hard di sks and show the fo llowing copying info on t he LCD. The LCD w ill show the follo wing info during the copyin g process: elapsed time, completed percentage. The copy speed, capacity and time wi ll vary depending on the source hard disk. Once the copying process is complete the LCD will display the following results. Copy- 36MB/s 0% 2 32.9GB 00: 00:00 Copy HDD OK: 11 Fail: 0 1. C opy HDD HDD:11 232.9GB Async Copy HDD This option is used to specify the size of the source for simplifying fu\ rther copying operations. Choose option 2 from the me nu: 2. Async Copy HDD HDD: 10 232.9GB Press ENT. Before the start of t he reproduction, if t he console detects that a hard drive capacity is less t han source, then the LCD will show t he cor responding channel number. 8 Space Not Enough A nd then automatically copies. The LCD will display t he following info. Acpy- 36MB/s 0% 232.9GB 00:00:00 If the rep lication process to conti nue to add additi onal hard disk device, LCD will only show the last completed perc entage. Once t he copying process is complete t he LCD w ill display the fo llowing results. Async C opy HDD OK: 11 Fail: 0 Compare Compare HDD is used to see if the data on a source hard disk is i dentical to the target hard disk after the C opy HD operation. Choose option 3 from the me nu:
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ 3. Compare HDD HDD: 11 232.9GB Press ENT to begin the comparison. The L CD will display the fol lowing info. Comp-23MB/s 0% 232.9GB 00:00:00 Once t he comparison is complete the LCD wi ll display t he following info as well as t he amount of data on the source hard disk. Compare OK:11 Fa il: 0 Dif: 0 PreScan S ourcePreScan HDD is used to check if the source hard disk can be accessed pro\ perly. It also tests the read speed. Choose option 5 from the m enu: 5. PreScan S ource HDD : 11 232.9GB Async Compare Compare HDD is used to see if the data on a source hard disk is identica\ l to the target hard disk after the Copy HDD operation. While compare process is on-going, allows you to plug-in additional target drives and comparison \ will automatically start for the added target drive. Choose option 4 from the me nu: 4. Async Compare HDD: 11 232.9GB Press ENT to begin the async comparison. The L CD will display the fo llowing info. ACmp-23MB/s 0% 232.9GB 00:00:00 Compare OK:11 Fa il: 0 Dif: 0 If the comparison process continu es to add additiona l hard disk device, LCD w ill only show the last completed percentage. Once t he copying process is complete t he LCD w ill disp lay t he following results. Press ENT to begin scan. The L CD will display the fo llowing inf o Scan- 90MB/s 1% 230.6GB 00:00:27 Once t he scan is complete , the L CD w ill display the corresp onding results PreScan OK!
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ 6. ReScan BUS ReScan Bus Choose option 6 from t he menu: Press ENT to re-scan hardware. The LCD wi ll display the follo wing info. Re-Scan BUS NOW? Yes Wh en the scan is complete the L CD will display the fol lowing info. Bus re- scan OK ! 7. S ource Size Source Size Source Size is used to show the capacity of the source. Ch oose option 7 from the m enu: Press ENT and the L CD w ill show the fo llowing info. HDD:Hitachi Size: 232.9GB Then press ENT and the L CD w ill show the datas size info. HDD:Hitachi Data: 200.9GB 8. Secure Erase Secure Erase Secure Erase is used to wi pe the data of the hard disk, it will erase a ll of HDD of dup licator (included Source HDD). Ch oose option 8 from the m enu: Press ENT to access option. By default it is set to No . Use the Up and Down arrow keys t o choose Yes. Wipe a ll data. Conti nue? No Press ENT and the L CD w ill show the fo llowing info. ReScan Bus allows swapping the source or target in and out without having to reboot the system.
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ 10. Setup SetupSetup allows various system settings to be changed. There are 12 sub-opt\ ions: Language, Copy Size, Startup Menu, Auto Compare, Button Sound, Device In\ fo, System Info, Fast Copy, Auto Start Drive, Auto Start Timer, Tolerance Si\ ze and Boot Time Delay. Ch oose option 8 from the m enu: In Process Elapsed 01:00 9. Overwrite Overwrite Overwrite is used to overwrite the data of the hard disk, it will erase a ll HDDs connected to the duplicator (includ ing Source HDD). There are 3 sub-options: One pass, 3 pass and 7 pass. Ch oose option 9 from the m enu: Press ENT to access option. By default it is O ne pass Use the Up a nd Down arrow keys to ch oose other options. 9- 01. Overwrite O ne pass Press ENT to access option. By default it is set to No. Use th e Up a nd Down arrow keys to choose Yes. Wipe a ll data. Conti nue? No Press ENT and the LCD will show t he following info. In Process Elapsed 01:00 Language This opti on is used to select the systems lan guage support. By default this is set to Eng lish. Press ENT to change the Langu age settings. Language Eng lish
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ 10-02. Setup Copy Size Press ENT and the LCD will display a deta iled list of opti ons as shown below Use the Up and Down arrow keys t o choose dierent copy si zes. The system w ill oer their corresponding percentages so the user can specify t he amount to copy from the source hard disk. Press ENT to confrm and save the changes. C opy Size 100%~1 % (*MB) Startup Menu This opti on allows you to set an opti on other than Se tup to be display ed as the frst ava ilable opti on on t he m enu every time you star t the system. Startup M enu 1. C opy HDD Press ENT then use the Up and Down a rrow keys to choose other opt ions. By default the frst m enu option is Copy HDD. 10-03. Setup Startup M enu Auto Compare This opti on automatica lly compares the source hard disk wit h t he target hard disk after a copy operation is completed. Press ENT to access option. By default it is set to O. Use th e Up and Down arrow keys to choose On. Auto Com pare O 10-04. Setup Auto Compare Copy Size This option is used to specify the size o f the source hard disk for simp lifying further copying operations. Button Sound This option is used to control the so und of a button when y ou press it. 10-05. Setup Button Sound Press ENT and the L CD w ill display the fo llowing info. Use the Up and Down a rrow keys to ch oose w hether button sound is on or o. Button Sound On