Home
>
Addonics Technologies
>
HDD/SSD/Optical Drive Enclosure
>
Addonics Technologies 25 HDDSSD drive enclosure AERD25SN35 web User Manual
Addonics Technologies 25 HDDSSD drive enclosure AERD25SN35 web User Manual
View the Addonics Technologies 25 HDDSSD drive enclosure AERD25SN35 web User Manual for free. All the Addonics Technologies manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.
![Page 3
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Activity LED
The Activity LED glows to indicate the unit has power and blinks to indicate\
activity. It does not show RAID status.
Mode Switch
The Mode switch has four settings, described in detail below:
Jbod
This setting creates a non-RAID array called LARGE.
Number of drives: 2
Unit capacity: 100% of all drives together regardless of differences in size
Fault tolerance: cannot...](http://img.usermanuals.tech/thumb/181/2621/w300_25-hddssd-drive-enclosure-aerd25sn35-web-1478576401_d-2.png "Page 3
www.addonics.comTechnical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Activity LED
The Activity LED glows to indicate the unit has power and blinks to indicate\
activity. It does not show RAID status.
Mode Switch
The Mode switch has four settings, described in detail below:
Jbod
This setting creates a non-RAID array called LARGE.
Number of drives: 2
Unit capacity: 100% of all drives together regardless of differences in size
Fault tolerance: cannot...")
![Page 4
Using the Mode Switch
The unit will only set up a RAID or LARGE array if it is currently set f\
or
independent drives (Mode Switch set to “Nor”). If an array is de\
fined and a
different array setting is desired, the unit must be powered up one time wi\
th
the Mode Switch set to “Nor” before a new array will be created. O\
therwise,
simply set the switch to the desired setting and power up the unit. Leav\
e the
Mode Switch set to the desired array type.
NOTE: Setting or modifying the mode destroys...](http://img.usermanuals.tech/thumb/181/2621/w300_25-hddssd-drive-enclosure-aerd25sn35-web-1478576401_d-3.png "Page 4
Using the Mode Switch
The unit will only set up a RAID or LARGE array if it is currently set f\
or
independent drives (Mode Switch set to “Nor”). If an array is de\
fined and a
different array setting is desired, the unit must be powered up one time wi\
th
the Mode Switch set to “Nor” before a new array will be created. O\
therwise,
simply set the switch to the desired setting and power up the unit. Leav\
e the
Mode Switch set to the desired array type.
NOTE: Setting or modifying the mode destroys...")