Home > Addonics Technologies > Flash / SSD Reader and adapter > Addonics Technologies Internal DigiDrive Flash Reader AEDMDISU2 user guide

Addonics Technologies Internal DigiDrive Flash Reader AEDMDISU2 user guide

Add to Favourites
    Download as PDF

    View the Addonics Technologies Internal DigiDrive Flash Reader AEDMDISU2 user guide for free. All the Addonics Technologies manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 Technical Support If you need any assistance to get your unit functioning properly, please have your product information ready and contact Addonics Technical Support at: Hours: 8:30 am - 6:00 pm PST Phone: 408-453-6212 Email: http://www.addonics.com/support/query/ v7.1.11 T E C H N O L O G I E S User Guide Internal IDE/SATA/USB DigiDrive (AEDMDISU2) Mode Jumper (JP4): Note: Only applies on SATA connection The internal SATA / USB DigiDrive supports Type I, II CF Cards, CF Micro drive, SD, SDHC, miniSD...
    Page 2 Motherboard I. Setting up the device in SATA mode a. Connect a 4-pin floppy power cable from PC to the internal SATA / USB DigiDrive. b. Attach SATA cable from internal SATA / USB DigiDrive to the PC SATA port. The tables show drive icon and media detection behavior basing on the mo\ de switch setting and the type of SATA port the internal SATA / USB DigiDrive is connected to. Open mode – force flash media to become Fixed disk type Close mode – force flash media to become II. Setting up the...
    Start reading Addonics Technologies Internal DigiDrive Flash Reader AEDMDISU2 user guide

    Related Manuals for Addonics Technologies Internal DigiDrive Flash Reader AEDMDISU2 user guide

    All Addonics Technologies manuals