Canon printer Color imageCLASS MF729Cdw User Manual
Have a look at the manual Canon printer Color imageCLASS MF729Cdw User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
11 En Connecting via a Wireless LAN Checking Before the Setup Wireless LAN Router Internet Is the computer connected to the router (access point) correctly by a LAN cable or wireless LAN? For more information, see the instruction manual for the network device you are using, or contact the networking device manufacturer. Have the network settings on the computer been completed? If the computer is not properly confi gured, you may not use the wireless LAN connection even after completing the following settings. NOTE • You cannot connect both the wired LAN and wireless LAN at the same time. In addition, the machine is set to the "Wired LAN" by default. • When you connect to a network environment that is not security protected, your personal information could be disclosed to third parties. Please use caution. • If you connect through a LAN in the offi ce, contact your network administrator. Checking the Router Select the connection method to the wireless LAN. Select from the following two methods depending on the router (access point) that you are using. ●There is a button.This machine supports WPS (Wi-Fi Protected Setup). You can easily setup if your router (access point) has a button, and if the mark is on the router. If you are not sure whether or not your router supports WPS, please see the manual included in the product, or contact the product manufacturer. ● There is no button.If there is no button on your router (access point), you may manually select SSID and complete the settings. In this case, you need to remember SSID and network key of your router (access point). See “1 Check SSID or Network Key for a Wireless LAN Router/Access Point.” (P.12) to learn how to fi nd out your SSID and network key. To set up with WPS PIN code method, or setup manually: e-Manual “Connecting to a Wireless LAN” Setting Wireless LAN Push Button Mode 1 Tap in the Home Screen. 2 Tap . 3 Tap . 4 Read the message that is displayed, and tap . 5 Tap . Wireless LAN Settings WPS PIN Code Mode WPS Push Button Mode SSID Settings Power Save Mode Bandwidth Settings Connection Information 6 Tap . 7 Press and hold* the button until the lamp lights or blinks. You should press the WPS button within 2 minutes after you tap in step 6. * The time that you should hold the button may vary depending on the router you are using. 8 Wait approximately 2 minutes after the connection. IP address is set during this period of time. When an error message appears: Tap to close the screen, check whether or not the network key is correct, and then retry the settings. If the access point cannot be detected even after retrying, see the following. e-Manual “When an Error Message Appears” When checking the network connection: You can check if the machine is properly connected to the network using a computer that connected to a network. e-Manual “Viewing Network Settings” To set IP address manually: e-Manual “Connecting to a Wireless LAN”
12 En Setting the Access Point Manually 1 Check SSID or Network Key for a Wireless LAN Router/Access Point. • Check the label on the Wireless LAN router. • You can check the SSID or the network key using “Canon MF / LBP Wireless Setup Assistant,” which is included in the provided DVD-ROM supplied with the machine. 4BNQMF#$% 8&1 #$%& 4BNQMF&()*+ 8114, &%$# 4BNQMF, 8114, #$% If the information of the wireless LAN router is not displayed, click the [Refresh] button. If the information is not displayed when you click the [Refresh] button, check if the computer settings for a wireless LAN router (access point) are complete. 2 Write down the name of SSID and network key displayed in step 1. When multiple access points are displayed, write all SSIDs that are displayed. SSID It is sometimes written as name of network, or name of access point. If there are multiple SSIDs, please write down all. Network Key It is sometimes written as PIN, WEP key, WPA/WPA2 passphrase, PSK or preshared key. 3 Tap in the Home Screen. 4 Tap . If a screen appears prompting you to enter a System Manager PIN, enter the correct PIN using the numeric keys, and tap . 5 Tap . 6 Read the message that is displayed, and tap . 7 Tap . 8 Tap . SSID Settings Enter Manually Select Access Point 9 Select a wireless LAN router. If multiple matched SSIDs are displayed, select the ID that is listed fi rst (the one with the strongest signal). 10 Enter the network key that you have written down. Enter the network key using the numeric keys, and tap . WEP Key (5-26 Characters) A Apply A/a/12 XXXXXXXXXXXXX 11 Tap . 12 After the screen is displayed, wait until the Wi-Fi indicator stops blinking and turns on. 13 Wait approximately 2 minutes after the connection. IP address is set during this period of time. When an error message appears: Tap to close the screen, check whether or not the network key is correct, and then retry the settings. If the access point cannot be detected even after retrying, see the following. e-Manual “When an Error Message Appears” To set IP address manually: e-Manual “Connecting to a Wireless LAN”
13 En Setting a Paper Size and Type Following the instructions on the screen, set the paper size and type. HomeSecure Print Paper Settings ID Card Copy Home Screen Settings Address Book MenuPaper Settings Drawer 1 Multi-Purpose Tray Drawer 2 Register Custom Paper Select Frequently Used Paper S Specifying Initial Fax Settings and Connecting a Telephone Cable 1 Specify the initial fax settings. Home Copy Fax Memory Media Print Scan Address Book MenuWhen do you want to perform fax setup? Set Up Later Set Up Now Follow the “Fax Setup Guide” to specify a fax number, a unit name, and a receive mode. For more details on the receive mode, see the e-Manual. e-Manual “Faxing” ▶ “Confi guring Initial Settings for Fax Functions” ▶ “Deciding Which Fax Receive Mode to Use” How to use a user name When you send a document, the sender information that you registered is printed on the recipient’s paper. 2 Connect a telephone cable. Telephone line connector Telephone When appears on the display, connect the telephone cable by referring to the illustration. 3 Exit the Fax Setup Guide, and then restart the machine. Yes No Do you want to end Fax Setup Guide?OK Turn the main power OFF and ON to apply the settings. Turn OFF the machine and wait for at least 10 seconds before turning it ON again. The telephone line types are not detected automatically. See the e-Manual and set a telephone line manually. e-Manual “Setting Menu List” ▶ “Fax Settings” ▶ “Basic Settings” ▶ “Select Line Type” For details on the installation procedures: Install the driver and software using the provided DVD- ROM. For details on the installation procedures, see the MF Driver Installation Guide. You can also download the driver from the Canon website. Windows MacOS For Mac users: The DVD-ROM supplied with this machine may not include the driver for Mac OS. This is diff erent depending on when you purchase the machine. Please fi nd and download the appropriate driver on our Canon homepage. For further information on installation or using the driver, see the MF Driver Installation Guide which is packed with it.
14 En Perform Useful Tasks You can use various functions in this machine. Following functions are the overview of the main functions that you can use routinely. Copy Enlarged/Reduced Copies You can enlarge or reduce standard size documents to copy on standard size paper or specify the copy ratio in percentage. 2-Sided Copying You can copy 1-sided documents on both sides of paper. Collating You can sort copies into sets arranged in page order. Reduced Layout You can reduce multiple documents to copy them onto one sheet. 2 on 14 on 1 Copying ID Card You can make a copy of a 2-sided card onto one side of paper. Fax Sending a Document Directly from a Computer (PC Fax) In addition to the normal sending and receiving faxes, you can use the PC fax. Sending You can register fax destinations in the address book. You can specify the destinations using various methods, enabling you to send documents quickly and easily. • Destination search • Favorites list • Coded dialing • Destination Group • LDAP server • Specifying from the sending history • Sequential broadcast Receiving ●Receiving in the memory You can store the received documents in the memory. You can print the stored documents at any time, and if you do not need them, you can delete them. ●Remote Receiving If an external telephone is connected, you can switch to the fax receiving mode immediately by dialing the ID number for fax receiving using the dial buttons of the telephone during a phone call. I-Fax You can send and receive faxes over the Internet. Documents are converted to TIFF images and sent as e-mail attachments without using a telephone line. Print Enlarged/Reduced Printing 2-Sided Printing Reduced Layout You can reduce multiple documents to print them onto one sheet. 2 on 1 4 on 1 Booklet Printing Poster Printing Watermark Printing Displaying a Preview before Printing Selecting a “Profi le” Network Settings This machine comes equipped with a network interface that you can construct a network environment easily. You can print a document, use the PC fax, and use the network scan from all computers which are connected with the machine. The machine supports to increase work effi ciency as a shared machine in the offi ce. Scan Saving the Documents Using the Operation Panel of the Machine Documents Data Saving the Documents Using Operations from a Computer ●Scanning with the MF Scan Utility ●Scanning from an Application ●Scanning with the WIA Driver* Documents Data Saving in a USB Memory You can save scanned documents in a USB memory connected to the machine. Documents Data E-mailing Scanned Documents You can send scanned documents to your e-mail application. DocumentsData E-mail + Sending Scanned Documents to a File Server You can send scanned documents to a fi le server. Documents Data File server Remote UI You can understand the condition of the machine from the computers on the network. You can access the machine and manage jobs or specify various settings via network. * Windows Vista/7/8 Only
15 En Clearing Paper Jams If the following screen appears, a paper jam has occurred in the feeder or inside the machine. Follow the procedure displayed on the screen to remove the jammed document or paper. This manual indicates only areas where paper jams occur. For details on each function, see the e-Manual.Paper jammed.Next Press [Next] to display the steps. Manual feed slot Paper drawer (of the main unit) Optional paper drawer Back side Back side FeederOutput area
16 En Replacing Toner Cartridges Toner cartridges are consumables. When the amount remaining in a toner cartridge is low, a message appears on the screen or the following problems may occur. Take the appropriate action accordingly. When a Message Appears The machine displays a message when the amount remaining in a toner cartridge is low. MessageWhen the message is displayed on the screen Description and solutions Prepare the * cartridge. The toner cartridge needs a replacement soon. We recommend checking the level of remaining in a toner cartridge and replacing the toner cartridge with a new one before printing high-volume documents. e-Manual “Replacing Toner Cartridges” If this message is displayed, the incoming fax will be stored in the memory without being printed. Also, reports may not be printed, even if they are set to be printed automatically. If in is set to , however, printing will be continued, but faxes may fade or blur. e-Manual “Printing Reports and Lists” e-Manual “Setting Menu List” End of Toner Cart. Lifetime The toner cartridge has reached the end of its life. If this message does not disappear, replace the toner cartridge. You can continue printing, but the print quality cannot be guaranteed. e-Manual “Replacing Toner Cartridges” * Black, yellow, magenta, or cyan will appear in . If Printouts are Poor in Quality If your printouts begin to show any of the following features, one of your toner cartridges is nearly empty. Replace the nearly empty toner cartridge even if no message is displayed. White streaks appear Partially faded Uneven density Toner smudges and splatters appear Blank space of originals becomes slightly colored
17 En Symbols Used in This Manual WARNING Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. To use the machine safely, always pay attention to these warnings. CAUTION Indicates a caution concerning operations that may lead to injury to persons if not performed correctly. To use the machine safely, always pay attention to these cautions. IMPORTANT Indicates operational requirements and restrictions. Be sure to read these items carefully to operate the machine correctly, and avoid damage to the machine or property. Keys and Buttons Used in This Manual The following symbols and key names are a few examples of how keys to be pressed are expressed in this manual. • Operation panel keys: [Key icon] Example: • Display: • Buttons and items on the computer display: [Preferences] Illustrations and Displays Used in This Manual Illustrations and displays used in this manual are which of Color imageCLASS MF729Cdw unless specifi ed. Important Safety Instructions Please read the “Important Safety Instructions” in this manual and in the e-Manual thoroughly before operating the machine. As these instructions are intended to prevent injury to the user and other persons or to prevent destruction of property, always pay attention to these instructions and operational requirements. Please note that you are responsible for all damages caused by failure to follow the directions provided herein, using the device for any purpose for which it was not intended, or repairs or alterations made by anyone other than a Canon-approved technician. Installation WARNING • Do not install the machine near fl ammable substances such as alcohol-based products or paint thinners. If these substances come in contact to the electrical parts inside the machine could ignite these substances and cause a fi re or increase your risk of electric shock. • Do not place necklaces and other metal objects or containers fi lled with liquid on the machine. If foreign substances come into contact with electrical parts inside the machine, this may result in a fi re or electrical shock. If any of these substances falls into the machine, turn off the power to the machine immediately and contact your local Canon dealer. • Do not use near any medical equipment. Radio wave emitted from this machine may interfere with medical equipments, which may result in serious accidents. CAUTION • Do not install the machine in the following locations. Doing so may result in personal injury, fi re or electrical shock. − Unstable location − A location subject to excessive vibrations − A location where block the ventilation slots (too close to walls, bed, shaggy rug, and other similar objects) − A damp or dusty location − A location exposed to direct sunlight or an outside place − A location subject to high temperatures − A location near open fl ames − A location with poor ventilation system • Although ozone is generated from the machine during operation, it does not have any aff ect on the human body. However, if you intend to use the machine for long periods of time, ensure that the installation location is well ventilate d. Also avoid locations where people would be exposed to emissions from the machine. • Do not connect unapproved cables to this machine. Doing so may result in a fi re or an electric shock. • Machines with a hard disk may not operate properly when used at high altitudes of about 3,000 meters above sea level, or higher. Power Supply WARNING • Do not use power cords other than the one provided, as this can result in a fi re or electrical shock. • The provided power cord is intended for use with this machine. Do not connect the power cord to other devices. • Do not modify or bend the power cord and do not pull on it with great force. Do not place heavy objects on the power cord. Damaging the power cord may result in a fi re or an electric shock. • Do not plug or unplug the power plug with wet hands, as this can result in electrical shock. • Do not use extension cords or multi-plug power strips with this machine. Doing so may result in a fi re or electric shock. • Do not bundle up or tie up the power cord in a knot, as this can result in a fi re or electrical shock. • Insert the power plug completely into the AC power outlet. Failure to do so can result in a fi re or electrical shock. • Remove the power plug completely from the power outlet during a thunder storm. Failure to do may result in a fi re, electric shock, or malfunction. CAUTION • Use only a power supply that meets the voltage requirements listed herein. Failure to do so may result in a fi re or electric shock. • Install this machine near the power outlet and leave suffi cient space around the power plug so that it can be unplugged easily in an emergency. Handling WARNING • Do not disassemble or modify the machine. There are high- temperature and high-voltage components inside the machine which may result in a fi re or electrical shock. • Do not allow children to touch or play with the power cord and cables or internal or electrical parts. Doing so may result in serious personal injury. • Please contact an authorized Canon dealer if the machine makes an unusual noise, emits an unusual smell, or emits smoke or excessive heat. Continued use may result in a fi re or electric shock. • Do not use fl ammable sprays near the machine. If fl ammable substances come into contact with electrical parts inside the machine, this may result in a fi re or electric shock.
18 En CAUTION • For your safety, please unplug the power cord if the machine will not be used for a long period of time. • Use caution when opening and closing covers to avoid injury to your hands. • Keep hands and clothing away from the rollers in the output area. If the rollers catch your hands or clothing, this may result in personal injury. • The inside of the machine and the output slot is very hot during and immediately after use. Avoid contact with these areas to prevent burns. Also, printed paper may be hot immediately after being output, so use caution when handling it. Failure to do so may result in burns. • The laser beam can be harmful to the human body. The laser beam is confi ned in the laser scanner unit by a cover, so there is no danger of the laser beam escaping during normal machine operation. Read the following remarks and instructions for safety. − Never open covers other than those indicated in this manual. − Do not remove the caution label attached to the cover of the laser scanner unit. − If the laser beam should escape and enter your eyes, exposure may cause damage to your eyes. • If you operate this machine in manners other than the control, adjustment, and operating procedures prescribed in this manual, this may result in hazardous radiation exposure. • This machine is confi rmed as the class 1 laser product in IEC60825- 1:2007. Maintenance and Inspections WARNING • Turn off the machine and unplug the power cord from the outlet before cleaning. Failure to do so may result in a fi re or an electric shock. • Unplug the power plug from the power outlet periodically and clean the area around the base of the power plug’s metal pins and the power outlet with a dry cloth to remove dust and grime. When damp, accumulated dust may cause short circuiting or fi res. • Use a damp, well wrung-out cloth to clean the machine. Dampen cleaning cloths with water only. Do not use alcohol, benzenes, paint thinners, or other fl ammable substances. If these substances come into contact with electrical parts inside the machine, this may result in a fi re or electric shock. • Check the power cord and plug regularly for damage. Check the machine for rust, dents, scratches, cracks, or excessive heat generation. Use of poorly-maintained equipment may result in a fi re or electric shock. Consumables WARNING • Do not dispose of used toner cartridges in open fl ames. This may cause an ignition, and result in burns or fi re. • If you accidentally spill or scatter toner, carefully wipe up the loose toner with a damp, soft cloth and avoid inhaling any toner dust. Never use a vacuum cleaner to clean up loose toner. Doing so may cause a malfunction in the vacuum cleaner or result in a dust explosion due to static discharge. CAUTION • Keep the toner cartridges and other consumables out of the reach of small children. If toner is ingested, consult a physician or poison control center immediately. • Do not attempt to disassemble the toner cartridge. The toner may scatter and get into your eyes or mouth. If toner gets into your eyes or mouth, wash them immediately with cold water and consult a physician. • If toner spills from the toner cartridge, avoid inhaling it or allowing it to come into contact with your skin. If the toner comes into contact with your skin, wash immediately with soap. If you inhale the toner or your skin becomes irritated due to contact with the toner, consult a physician or poison control center immediately. Others WARNING • If you are using a cardiac pacemaker: This machine generates a low level magnetic fi eld. If you feel any abnormalities in your body while using this machine, please move away from the machine and consult your physician immediately. Telephone Equipment When using telephone equipment, basic safety precautions should always be followed to reduce the risk of fi re, electric shock, and injury to persons, including the following: 1. Do not use this machine near water (i.e., near a bathtub, kitchen sink, or laundry tub), or in a wet basement or near a swimming pool. 2. Avoid using the telephone during an electrical storm, as there may be a remote risk of electric shock from lightning. 3. Do not use the telephone to report a gas leak in the vicinity of the leak.
19 En Legal Notices Product Name Safety regulations require the product’s name to be registered. In some regions where this product is sold, the following name(s) in parentheses ( ) may be registered instead. Color imageCLASS MF729Cdw (F167802) Color imageCLASS MF726Cdw (F167802) Legal Limitations on the Usage of Your Product and the Use of Images Using your product to scan, print or otherwise reproduce certain documents, and the use of such images as scanned, printed or otherwise reproduced by your product, may be prohibited by law and may result in criminal and/or civil liability. A non-exhaustive list of these documents is set forth below. This list is intended to be a guide only. If you are uncertain about the legality of using your product to scan, print or otherwise reproduce any particular document, and/or of the use of the images scanned, printed or otherwise reproduced, you should consult in advance with your legal advisor for guidance. − Paper Money − Money Orders − Certifi cates of Deposit − Postage Stamps (canceled or uncanceled) − Identifying Badges or Insignias − Selective Service or Draft Papers − Checks or Drafts Issued by Governmental Agencies − Motor Vehicle Licenses and Certifi cates of Title − Travelers Checks − Food Stamps − Passports − Immigration Papers − Internal Revenue Stamps (canceled or uncanceled) − Bonds or Other Certifi cates of Indebtedness − Stock Certifi cates − Copyrighted Works/Works of Art without Permission of Copyright Owner FCC (Federal Communications Commission) Users in the U.S.A. Color imageCLASS MF729Cdw: F167802 Color imageCLASS MF726Cdw: F167802 Contains Transmitter Module FCC ID: TLZ-NM383 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. FCC CAUTION Users in the U.S.A. Changes or modifi cations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment to an outlet on a circuit diff erent from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles). Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of the FCC Rules. Do not make any changes or modifi cations to the equipment unless otherwise specifi ed in this manual. If you make such changes or modifi cations, you could be required to stop operation of the equipment. Canon U.S.A., Inc. One Canon Park, Melville, NY 11747, U.S.A. TEL No. 1-800-OK-CANON
20 En Users in the U.S.A. Pre-Installation Requirements for Canon Facsimile Equipment A. Location Supply a suitable table, cabinet, or desk for the machine. See the e-Manual for specifi c dimensions and weight. B. Order Information 1. A single telephone line (touch-tone or rotary) should be used. 2. Order an RJ11-C telephone wall jack (USOC), which should be installed by the telephone company. If the RJ11-C wall jack is not present, telephone/facsimile operation is not possible. 3. Order a normal business line from your telephone company’s business representative. The line should be a regular voice grade line or an equivalent one. Use one line per unit. DDD (Direct Distance Dial) line -or- IDDD (International Direct Distance Dial) line if you communicate overseas NOTE Canon recommends an individual line following industry standards, i.e., 2,500 (touch-tone) or 500 (rotary/pulse dial) telephones. A dedicated extension off a PBX (Private Branch eXchange) unit without “Call Waiting” can be used with your facsimile unit. Key telephone systems are not recommended because they send nonstandard signals to individual telephones for ringing and special codes, which may cause a facsimile error. C. Power Requirements The machine should be connected to a standard 120 volt AC, threewire grounded outlet only. Do not connect this machine to an outlet or power line shared with other appliances that cause “electrical noise.” Air conditioners, electric typewriters, copiers, and machines of this sort generate electrical noise that often interferes with communications equipment and the sending and receiving of documents. Connection of the Equipment This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the rear panel of this equipment is a label that contains, among other information, a product identifi er in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company. The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the sum of RENs should not exceed fi ve (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifi er that has the format US: AAAEQ##T XXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). An FCC compliant telephone line cable and modular plug is provided with this equipment. This equipment is designed to be connected to the telephone network or premise wiring using a compatible modular jack that is Part 68 compliant. This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subjected to state tariff s. In Case of Equipment Malfunction Should any malfunction occur which cannot be corrected by the procedures described in this guide or the e-Manual, disconnect the equipment from the telephone line cable and disconnect the power cord. The telephone line cable should not be reconnected or the power switch turned ON until the problem is completely resolved. Users should contact Canon Authorized Service Facilities for servicing of equipment, Information regarding Authorized Service Facility locations can be obtained by calling Canon Customer Care Center (1-800-OK-CANON). Rights of the Telephone Company If this equipment (Color imageCLASS MF729Cdw/MF726Cdw) causes harm to the telephone network, the telephone company may temporarily disconnect service. The telephone company also retains the right to make changes in facilities and services that may aff ect the operation of this equipment. When such changes are necessary, the telephone company is required to give adequate prior notice to the user. However, if advance notice is not possible, the telephone company will notify the customer as soon as possible. Also, the customer will be advised of his/her right to fi le a complaint with the FCC if he/she believes it is necessary. WARNING The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including FAX machines, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the fi rst page of the transmission, the date and time it is sent and an identifi cation of the business or other entity, or other individual sending the message and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.) NOTE In order to program this information into your machine, you should complete the procedure for registering your name, unit’s telephone number, time, and date in the Getting Started. Users in Canada Pre-Installation Requirements for Canon Facsimile Equipment A. Location Supply a suitable table, cabinet, or desk for the machine. See the e-Manual for specifi c dimensions and weight. B. Order Information 1. A single telephone line (touch-tone or rotary) should be used. 2. Order a CA11A modular jack, which should be installed by the telephone company. If the CA11A jack is not present, installation cannot occur. 3. Order a normal business line from your telephone company’s business representative. The line should be a regular voice grade line or an equivalent one. Use one line per unit. DDD (Direct Distance Dial) line -or- IDDD (International Direct Distance Dial) line if you communicate overseas NOTE Canon recommends an individual line following industry standards, i.e., 2,500 (touch-tone) or 500 (rotary/pulse dial) telephones. A dedicated extension off a PBX (Private Branch eXchange) unit without “Call Waiting” can be used with your facsimile unit. Key telephone systems are not recommended because they send nonstandard signals to individual telephones for ringing and special codes, which may cause a facsimile error.