Canon printer MAXIFY MB2120 User Manual

							1688Cause
The ink has run out.
WhattoDoReplace the ink tank and close the front cover.Printing under the current condition may damage the machine.
If you want to continue printing in this condition, you need to disable the function for detecting the
remaining ink level. Press and hold the machine's  Stop button for at least 5 seconds, and then release it.
With this operation, disabling the function for detecting the remaining ink level is memorized. Please be
advised that Canon shall not be liable for any malfunction or trouble caused by continuation of printing
under the ink out condition.
Important

						

							1700Cause
Ink absorber is almost full.
WhattoDo
Press the printer's  OK button to continue printing. Contact your nearest Canon service center to request a
repair.
1202 
						

							1701Cause
Ink absorber is almost full.
WhattoDo
Press the printer's  OK button to continue printing. Contact your nearest Canon service center to request a
repair.
1203 
						

							1754Cause
The ink tank is not installed properly.
WhattoDo Open the front cover.
Then push the ink tank.
After installing the ink tank properly, close the front cover.
If this does not solve the problem, contact your nearest Canon service center to request a repair.
Important

						

							1755Cause
The ink has run out.
WhattoDoTo maintain both machine and print quality, the machine cannot continue printing under the ink out
condition.
Cancel printing and replace the ink tank before printing again.
Important

						

							1871Cause
Cassette is not inserted.
WhattoDo
Insert the cassette.
Note

						

							1890Cause
Protective material or tape may still be attached to print head holder.
WhattoDo Open the front cover and make sure the protective material and tape have been removed from the printhead holder.
If the protective material or tape is still there, remove it and close the front cover.
If this does not solve the problem, contact your nearest Canon service center to request a repair.
1207 
						

							2001Cause
An incompatible device is connected.
WhattoDoCheck the device connected to the USB flash drive port. Printing photos directly is possible with a USB
flash drive.
1208 
						

							2002Cause
An unsupported USB hub is connected.
WhattoDo If a USB flash drive is connected to the printer through the USB hub, disconnect the hub from the printer.Connect a USB flash drive directly to the printer.
1209 
						

							2110CausePaper settings for printing or copying differ from cassette paper information set on printer.
Note