Eiki Eip-1 Multimedia Projector Owners Instruction Manual

							1
 
Table of Contents 
 
 
 
1. Safety Instructions···················································································2  
2. The Projector····························································································3 
   2.1 Features  3 
    2.2 Accessories  4 
    2.3 Appearance  5 
3. Setting up the Projector··········································································6 
  3.1 How to connect the projector   6 
  3.2 Turning on/off the projector   8 
  3.3 Adjusting the altitude of projected images   9 
 3.4 Adjusting the focus and zoom   10 
 3.5 Projected image size   11 
4. How to use the Projector·······································································12 
  4.1 Initial image adjustment   12 
  4.2 Control panel and remote controller   12 
5. Menu·········································································································16 
    5.1 Image (VGA mode)  16 
    5.2 Image (Video mode)  17 
    5.3 Display (VGA mode)  18 
    5.4 Display (Video mode)  20 
    5.5 Audio  22 
    5.6 Management  23 
    5.7 Language  24 
6. Maintenance·····························································································25 
      6.1 Replacing the lamp  25 
    6.2 Cleaning lens  25 
7. Appendix··································································································26 
 7.1 Common problems & trouble-shooting     26 
 7.2 Specifications   28  
						

							2
  1. Safety instructions 
            Before you use the projector, please read this manual thoroughly and 
comply with the safety instructions hereunder. Improper use may cause fire, 
electric shock, injuries, or reduce the life of your projector. 
    Warning: Please ensure the projector is grounded properly by connecting the 
power cord to a grounded AC outlet. Do not defect the safety purpose of the 
grounding type plug.
 
    Warning: Do not cover the lens while the lamp lights. 
    Warning: To protect your eyes, please do not look at the projector’s light 
source. 
  Warning: To replace the lamp, please turn off and unplug the projector first; 
then wait for 1 hour before replacing the lamp. Please refer to 
page 25 “Replacing the lamp” for the operation procedure. 
    Warning: Please use the power cord that comes with your projector. Please 
use the grounded jack for safety. 
  Warning: Please do not block the openings around the projector for safety. 
    Warning: Do not place any drinks on top of the projector. The projector can 
be damaged if wet. 
    Warning: Do not place the projector in excessively warm or humid areas. 
Please avoid direct sunshine. 
    Warning: To avoid electric shock, please do not dismantle the projector by 
yourself if it is not working. 
    Warning: To prevent your projector from dropping, please be careful when 
you move or carry it.  
						

							3
2. The projector 
 
2.1 Features  
• With the modularized structure of the product, all you need is the main 
body when conducting a presentation, thereby making your job easier. 
• XGA model can receive signals with resolution up to 1280x1024. To 
ensure the output quality, please adjust the setup of your computer 
display card to be less than or equal to 1280 x 1024. 
• Compact size, only 3.5 lbs.   
• Incorporated TI single chip 0.7” DLP
TM technology.   
• Users may replace 150W (VIP R150/E20) lamp easily.   
• Compatible with Mac / IBM PC 98. 
  
• Compatible with NTSC/NTSC4.43/PAL/PAL-M/PAL-N/HDTV.   
• Compatible with most interfaces comprising YCbCr, YPbPr, S-Video, 
Composite Video/Audio.   
• Fully functional remote controller, can be used as a mouse   
• DVI connector can be connected to digital or standard image signals.   
• Soft carrying case 
  
						

							4
2.2 Accessories 
Please check if following accessories are in the box. If any items are missing, 
please contact your dealer immediately. 
                    Projector with lens cap    Power cord    M1DA-VGA+USB cable 
 
            
 Video/Audio cable  PC Audio in/out cable    S-video cable 
  
               
   
VGA cable        USB mouse cable     Remote controller w/   
AAA battery x 2
  
 
 
Soft Carrying Case  
						

							5
2.3 Appearance 
 
 
 
 
 
 
 Control panel
Speaker 
Video Enhanced 
Ada
ptor
Lens cover 
Focus Ring
Zoom Ring 
Screw 
Main Body 
Infra Red Remote Receiver
Outlet Grille 
Wa r n i n g    Do keep the flow out of Outlet Grille free.  
						

							6
 
 
 
 
3. Setting up the projector 
 
3.1 How to connect the projector 
Depending on your purpose, you can select any of the following connection 
methods. 
1) For displaying data only 
Find the M1DA-VGA+USB cable; connect M1DA connector to the main body; 
and connect VGA and USB connectors to the computer. Then you can start 
presentation. Under such circumstance, video and audio function won’t be 
available.  
 
 
Foot Adjuster button 
Foot Adjuster 
						

							7 2) For playing video with audio effects 
Connecting with the Video Enhanced Adaptor; and choose terminals below to 
connect. 
 
  
 
 
 
 
1. Power cord 
2.  VGA signal in port 
3. USB mouse control 
4.  S-Video signal in port 
5.6    Composite Video signal in port
7.8    PC Audio In/Out port   
 
Notes  
1. Please make sure that both projector and computer are 
shutdown. 
2. Plug USB cable into computer. 
3. Plug one end of the VGA cable into the projector.; 
4. Plug the other end into the computer. 
5. Plug the power cord into the power connector on the side 
of projector; and plug into the socket. 
6. Turn on projector first, then computer.
 
Connecting to a Computer  
						

							8
3.2 Turning on/off the projector 
 
Turning on the projector 
1.  Remove the lens cover. 
2.  Make sure the signal cables are connected. 
3.  Plug-in the power cord. LED indicator flashes slowly. 
4. Press the Power key on the remote controller or control panel to turn on the 
projector. LED indicator lights up consistently at this time. 
5.  The message “Warming up! Please wait.” appears on the screen of the 
projector. Please wait for 20 seconds, the projector will detect the input signal 
source automatically. 
6.  If the message “No Signal!” appears on the screen, please check if the signal 
source has been activated or the signal cables have been connected. 
7.  To have the best image performance, press “Auto/Enter” each time when you 
turn on the projector. 
Caution When power is on, the projector will automatically detect if the 
projector is overheated internally. If yes, the LED indicator flashes 
rapidly and the fan cools down automatically after 8 seconds. The 
Power key does not function under this situation. 
 
Turning off the projector 
1. Press the Power key to power off the projector lamp. 
2.  When you press the Power key, you’ll see the message “Press Power Key 
again to power off lamp”. Then you can press the Power key to shutdown the 
projector; or this message will disappear automatically after 5 seconds. 
3.  As soon as the lamp is off, the LED indicator flashes rapidly. The Power key 
doesn’t function at this time.   
Notes: Please wait at least 120 seconds before you turn on the projector again. You 
should turn on the projector only after the LED indicator flashes slowly. 
4.  Unplug the power cord. 
 
Caution To protect the lamp, please do not pull out the power cord right after the 
lamp is off. Please wait at least 120 seconds when the fan stops.
  
						

							9
3.3 Adjusting the altitude of the projected image 
 
 
 
 
Please use the foot adjuster to adjust the height of projector. 
Higher
 
1.  Hold the foot adjuster button. 
2.  Raise the projector to the height you like; and then release the foot adjuster to 
fix the projector. 
 
Lower
 
1.  Hold the foot adjuster. 
2.  Lower projector to the height you like; and then release the foot adjuster to fix 
the projector. Foot Adjuster Button
Foot Adjuster