Home > AGI Security

AGI Security User Manuals

The manuals from this brand are divided to the category below. You can easily find what you need in a few seconds.
Show categories
AGI Security User Manuals
                                                    DMSS 
For Windows Phone 
 Version: DMSS v1.00.0 for Windows Phone 
Requirement: Windows Phone OS 7.0 or higher  
Download: Please search and download DMSS on the Market Place. 
Updates 
Please check for updates on the Market Place.  
                                            
                                                    Brand Series Model Capacity Interface Notes
SeagateSeagate 
SV35.5ST1000VX000 1T SATA VC-HD-ST1000VX0
SeagateSeagate 
SV35.5ST2000VX000 2T SATA VC-HD-ST2000VX7
SeagateSeagate 
SV35.5ST3000VX000 3T SATA VC-HD-ST3000VX0
SeagateSeagate 
Constellation 
ES.3    ST4000NM0033 4T SATA HD-ST4000NM0033
Westem 
DigitalWD10PURXWD10PURX-
1000G-64M 
cache1T SATA3.0 VC-HD-WD10PURX 
Westem 
DigitalWD20PURXWD20PURX-
2000G-64M 
cache2T SATA3.0 VC-HD-WD20PURX
Westem 
DigitalWD30PURXWD30PURX-
3000G-64M 
cache3T SATA3.0...
                                            
                                                    CVI DVR open port 
 
  
                                            
                                                    How to set up DVR for remote access (End User) 
1. Connect your DVR to the router using a network cable. 
 
2. Get the DVR onto your local network- this is done by: User 
 
3. Simply type in cmd into your PC 
 
4. A prompt box will come up  
 
5. Type in ipconfig and press enter 
 
6. Note the Gateway address (3rd line), this is the address of your router (shown on the 
diagram above) 
 
7. The Gateway needs to be put into the DVR network settings- you may need to change the 
ip address also. For example...
                                            
                                                     i 
 
 
 
P2P Operation Manual 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
V1.0.0 
 
 
 
  
                                            
                                                      1 / 11 
 
 
 
DDNS 快速指导手册   
 
 
 
 
 
 
 
 
 
 
 
Quick DDNS   
Quick Start Guide 
 
 
 
 
 
 
 
  
                                            
                                                    Brand Series Model Capacity Interface Notes
SeagateSeagate 
SV35.5ST1000VX000 1T SATA VC-HD-ST1000VX0
SeagateSeagate 
SV35.5ST2000VX000 2T SATA VC-HD-ST2000VX7
SeagateSeagate 
SV35.5ST3000VX000 3T SATA VC-HD-ST3000VX0
SeagateSeagate 
Constellation 
ES.3    ST4000NM0033 4T SATA HD-ST4000NM0033
Westem 
DigitalWD10PURXWD10PURX-
1000G-64M 
cache1T SATA3.0 VC-HD-WD10PURX 
Westem 
DigitalWD20PURXWD20PURX-
2000G-64M 
cache2T SATA3.0 VC-HD-WD20PURX
Westem 
DigitalWD30PURXWD30PURX-
3000G-64M 
cache3T SATA3.0...
                                            
                                                    CVI DVR open port 
 
  
                                            
                                                    How to set up DVR for remote access (End User) 
1. Connect your DVR to the router using a network cable. 
 
2. Get the DVR onto your local network- this is done by: User 
 
3. Simply type in cmd into your PC 
 
4. A prompt box will come up  
 
5. Type in ipconfig and press enter 
 
6. Note the Gateway address (3rd line), this is the address of your router (shown on the 
diagram above) 
 
7. The Gateway needs to be put into the DVR network settings- you may need to change the 
ip address also. For example...
                                            
                                                     i 
 
 
 
P2P Operation Manual 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
V1.0.0 
 
 
 
  
                                            
                                                    STEP1:RemovetheDVRcoverandfindthechipresistortoresetthehardware STEP2: The chip resistor is located on TP4 and TP5, as indicated below:  STEP3:DisconnecttheDVRpower.Then,makethechipresistorshort?circuitedwithaconductiveobject(suchasforceps),andre?connectthepower.Removetheconductiveobjectwhenyouhearashortbeepsound,andwaittilltheDVRreboots.  
                                            
                                                     
   
 
 
How to Factory Default the VC‐SYS‐HT0802 TVI‐DVR
 
 
 
Step 1: 
 
Remove the DVR cover and locate the main board. Locate the jumper pinholes as indicated by 
the yellow square as shown below in figure 1.    (TP4 and TP5) 
 
 
Figure 1 
 
Step 2: 
 
Disconnect power to the DVR. Next you will need to make the chip resistor short‐circuited 
with a conductive object. While shorting the resistor, re‐connect the power. 
 
NOTE:  
You can use any metal tool or object that can conduct current in order...
                                            
                                                    STEP1:RemovetheDVRcoverandfindthechipresistortoresetthehardware STEP2: The chip resistor is located on TP4 and TP5, as indicated below:  STEP3:DisconnecttheDVRpower.Then,makethechipresistorshort?circuitedwithaconductiveobject(suchasforceps),andre?connectthepower.Removetheconductiveobjectwhenyouhearashortbeepsound,andwaittilltheDVRreboots.  
                                            
                                                     
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
AVTECH CMS software, “TRIDENT”, is a powerful system designed for all-scale projects. Global 
monitoring and control become so eas y and efficient with its e-Map configuration and instant event 
pop-up display.   
Specifications 
Version Professional Standard 
▓ Architecture  
Client-server Mode  Client-server mode available to manage larger system with multiple computers. 
Device Search Supports device search of all NVR devices within a local network, and also allows...
                                            
                                                     
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
AVTECH CMS software, “TRIDENT”, is a powerful system designed for all-scale projects. Global 
monitoring and control become so eas y and efficient with its e-Map configuration and instant event 
pop-up display.   
Specifications 
Version Professional Standard 
▓ Architecture  
Client-server Mode  Client-server mode available to manage larger system with multiple computers. 
Device Search Supports device search of all NVR devices within a local network, and also allows...
                                            
                                                     
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
AVTECH CMS software, “TRIDENT”, is a powerful system designed for all-scale projects. Global 
monitoring and control become so eas y and efficient with its e-Map configuration and instant event 
pop-up display.   
Specifications 
Version Professional Standard 
▓ Architecture  
Client-server Mode  Client-server mode available to manage larger system with multiple computers. 
Device Search Supports device search of all NVR devices within a local network, and also allows...