MODEL # 50-1575911-742Page 2IMPORTANT!! PLEASE READ ENTIRE INSTRUCTION SHEET BEFORE ASSEMBLY!! SEAT DESIGNS MAY
VARY BUT THE ASSEMBLY
IS THE SAMEPARTS LIST DESCRIPTION
1
1
PARTS LIST DESCRIPTION QTY./PCSQTY./PCS
CHAIR FRAME
CHAIR BASE
NUT4
4
HEX WRENCH-11
PVC BOLT COVER
WASHER
1
8
BOLT4
2METAL PLATE
SPRING WASHER4
HEX WRENCH-2Step 1: Remove all protective materials and place all parts on a non-
abrasive surface to avoid scratching before or during assembly....
PARTS LIST DESCRIPTION
1
1
PARTS LIST DESCRIPTION QTY./PCSQTY./PCS
CHAIR FRAME
SWIVEL BASE
NUT4
HEX WRENCH-11
PVC BOLT COVER
WASHER
1
4
4
BOLT4
METAL PLATE2
SPRING WASHER4
HEX WRENCH-2Page 2 SEAT DESIGNS MAY
VARY BUT THE ASSEMBLY
IS THE SAMEIMPORTANT!! PLEASE READ ENTIRE INSTRUCTION SHEET BEFORE ASSEMBLY!!NOTE: MAKE SURE ARROWS
FROM BOTH THE “U” BARAND SWIVEL PLATE ARE
POINTING IN THE SAMEDIRECTION!MODEL # 50-19911U BARSWIVEL BASEMETAL PLATEWASHERSSWIVEL PLATESPRING WASHERSNUTSStep...
MODEL # 50-46490-487 IMPORTANT NOTE: Your sling seat may appear to be slightly warped. This is not unusual.
Proper assembly procedure will straighten out the sling seat in the frame. There are four bolts
used to attach the seat frame to the seat base. After inserting all the bolts, each of these bolts must be tightened a few revolutions at time in rotation.
Set parts on a flat, non-abrasive surface to avoid scratching. If you are
missing any parts or are unsure how to...
MODEL # 50-4662-702Page 2HEX WRENCH
BOLT
PARTS LIST DESCRIPTION QTY./PCSPARTS LIST DESCRIPTION QTY./PCS
SLING SEAT FRAME
1
1
12
2
2
SLING BACK FRAMEIMPORTANT!! PLEASE READ ENTIRE INSTRUCTION SHEET BEFORE ASSEMBLY!!E15 X 4MM
PLASTIC WASHER
E8.5 X 1.5MM
WASHERABImportant Note: The basic assembly of the chaise lounge is to attach the
back frame to the lounge frame. We recommend two people work together
to line up the holes on the back frame with the fixed nut holes on the loungeframe to ensure the bolts...
MODEL # 50-4460-702IMPORTANT NOTE: Your sling seat may appear to be slightly warped. This is not unusual.
Proper assembly procedure will straighten out the sling seat in the frame. There are four bolts
used to attach the seat frame to the seat base. After inserting all the bolts, each of these bolts must be tightened a few revolutions at time in rotation.
Step 1: Identify all parts packed in the carton against the parts list. Remove all protective
materials. Set parts on a flat,...
Page 2IMPORTANT!! PLEASE READ ENTIRE INSTRUCTION SHEET BEFORE ASSEMBLY!!
TO EXPEDITE ANY FUTURE WARRANTY CLAIMS, PLEASE KEEP INSTRUCTION SHEET, WARRANTY CARD AND RECEIPTU BARU METAL
PLATEBOLTPVC BOLT
COVERSPRING
WASHERNUTNOTE: MAKE SURE ARROWS
FROM BOTH THE U BAR AND ROCKER ASSEMBLY
ARE POINTING IN THE SAME DIRECTION!SEAT DESIGNS MAY
VARY BUT THE ASSEMBLY
IS THE SAMEStep 1: Identify all parts packed in carton against the parts list. Remove all...
FOOT CAPPage 2NOTE: MAKE SURE ARROWS
FROM BOTH THE U BAR
AND ROCKER ASSEMBLY
ARE POINTING IN THE
SAME DIRECTION!SEAT DESIGNS MAY
VARY BUT THE ASSEMBLY
IS THE SAMEIMPORTANT!! PLEASE READ ENTIRE INSTRUCTION SHEET BEFORE ASSEMBLY!!
TO EXPEDITE ANY FUTURE WARRANTY CLAIMS, PLEASE KEEP INSTRUCTION SHEET, WARRANTY CARD AND RECEIPTStep 1: Identify all parts packed in carton against the parts list. Remove all protective materials.
Place...
