Namco Games User Manuals
The manuals from this brand are divided to the category below. You can easily find what you need in a few seconds.
Show categoriesNamco Games User Manuals
TECHNICAL BULLETIN
Problem:-Not accelerating properly and/or brake remaining partly on.
Cause:-Quadrant Gear moving on the shaft.
Remedy:-Drill a 3mm hole through the quadrant gear and shaft and fit an M3x15 screw and
nut.
RIDGE RACER 2 ACCELERATOR/BRAKE ASSY
INSTRUCTIONS
DISCONNECT FROM POWER SUPPLY BEFORE COMMENCING
1. Remove four hex head bolts (M6x20) and withdraw the pedal assembly forward
from the machine.
2. Disconnect the connector.
3. Loosen the quadrant gear clamp screw and remove the quadrant...
RIDGE RACER
Operators Manual
Operators Manual
RIDGE RACER
UPRIGHT
Part No 90500009
TM
Issue 1 Part No 90500138
SOUL CALIBUR ll
Game PCB Kit
Connections
and
Adjustments
Operators Manual
IT IS THE RESPONSIBILITY OF THE OPERATOR TO MAINTAIN CUSTOMER SAFETY
AT
ALL TIMES, AND IT IS IMPERATIVE THAT THE DETAILS SET OUT IN THIS MANUAL
ARE
FOLLOWED PRECISELY.
Part No. 90500051
IT IS THE RESPONSIBILITY OF THE OPERATOR TO MAINTAIN CUSTOMER SAFETY
AT
ALL TIMES, AND IT IS IMPERATIVE THAT THE DETAILS SET OUT IN THIS
MANUAL
ARE FOLLOWED PRECISELY.
®
™
Part No. 90500084
Operators Manual
SPECIFICATION(1) Game Name : Splatter House(2) Control Level Switch : 1 (8 direction)(3) Button Switch : 2 (attack button 1, jump button 1)(4) PC Board : System 1(5) PC Board Size : 292x350mm (ROM-PC board) 292x243mm (CPU-PC board)(6) Edge Connector : JAMMA standard(56F edge connector...
SPECIFICATION(1) Game Name : Splatter House(2) Control Level Switch : 1 (8 direction)(3) Button Switch : 2 (attack button 1, jump button 1)(4) PC Board : System 1(5) PC Board Size : 292x350mm (ROM-PC board) 292x243mm (CPU-PC board)(6) Edge Connector : JAMMA standard(56F edge connector...
Operators Manual
TEKKEN 4
PART LIST
Page 1
Operators Manual
Part No 90500023