Home > 3D Perception > Projector > 3D Perception CompactView Sx30 I User Manual

3D Perception CompactView Sx30 I User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual 3D Perception CompactView Sx30 I User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 21 3D Perception manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							3D Perception        COMPACTVIEW CLAN 
    Revision 3          User Manual 
     
     
     16
     
     
    14. USING THE PROJECTOR 
    After set-up, switch on all equipment. 
     
    To switch the projector on, firmly press the POWER button on the keypad or the remote control. 
    The STATUS indicator will turn from yellow to green when the projector is switched on. 
     
    When only one source is connected, the projector will auto-detect the source. If more sources 
    are connected, the projector will display the source with the highest priority according to the 
    following list: 
     
    • VGA 1 
    • VGA 2 
    • DVI 
    • Component 
    • Super video 
    • Composite video 
     
    Sound will follow the selected source. Select between the sources by pressing the SOURCE 
    buttons on the keypad or the remote control. Only sources that are active will be displayed. 
     
    If no source is active, the message “searching” will appear on the screen. 
     
    If no source is active for a long time, the projector will go into the standby mode. The projector 
    will be switched on if at least one source is activated/re-activated. Can be disabled in the menu. 
    See DPMS in the set up sub menu. 
     
    To switch the projector off, firmly press the POWER button on the keypad or the remote control. 
    The STATUS indicator will turn from green to flashing yellow, then to yellow when switched off. 
      
    						
    							3D Perception        COMPACTVIEW CLAN 
    Revision 3          User Manual 
     
     
     17
     
     
    15. MENU SYSTEM 
    The menu system gives access to a multitude of image and system controls. 
     
    The menu system is structured through a top menu with several sub menus. The sub menus will 
    vary depending on the actual source selected. 
     
    Top Menu 
     
    picture:  
    Basic picture controls 
     
    advanced:  
    Advanced picture controls 
     
    audio:  
    Sound controls 
     
    set up:  
    General projector controls 
     
    utilities:  
    System controls and information
     
     
      
    						
    							3D Perception        COMPACTVIEW CLAN 
    Revision 3          User Manual 
     
     
     18
     
     
    15.1 Picture Sub-menu 
    Video 
     
     
    VGA 
      brightness:  
    Adjust the brightness  
     
    contrast:  
    Adjust the contrast 
     
     color:  
    Adjust the colour saturation 
     
    tint:  
    Adjust the video colour shade 
     
    sharpness:  
    Adjust the video sharpness 
     
    freeze frame:  
    Lock the image 
     
    scaling:  
    Select the image format 
     
    gamma:  
    Optimize the image gamma
     
    DVI 
     
     
     
      
    						
    							3D Perception        COMPACTVIEW CLAN 
    Revision 3          User Manual 
     
     
     19
     
     
    15.2 Advanced Sub-menu 
    Video 
     
     
    VGA 
     
      h position:  
    Moves the image sideways 
     
    v position:  
    Moves the image up and down 
     
    color temp:  
    Changes the colour temperature 
     
    custom colour:  
    Defines the custom colour temperature 
     
    video format:  
    Select between manual or auto (video only) 
     
    video type:  
    Select between video types; DVD and VCR 
    (video only) 
     
    phase:  
    Adjust for a stable image (computer only) 
     
    frequency:  
    Adjust the image width (computer only) 
     
    sharpness:  
    Adjust the sharpness of images DVI 
     
      
    						
    							3D Perception        COMPACTVIEW CLAN 
    Revision 3          User Manual 
     
     
     20
     
     
    15.3 Audio Sub-menu 
    volume:  
    Adjust the sound volume 
     
    bass:  
    Adjust the bass level 
     
    treble:  
    Adjust the treble level 
     
    mute:  
    Switch the sound on and off
     
     
      
    						
    							3D Perception        COMPACTVIEW CLAN 
    Revision 3          User Manual 
     
     
     21
     
     
    15.4 Set-up Sub-menu 
    keystone V:  
    Adjust the vertical keystone correction 
     
    keystone H:  
    Adjust the horizontal keystone correction 
     
    DPMS:  
    Activate/de-activate DPMS: Display Power 
    Management Signalling 
     
    source scan:  
    Switch the source scan on and off 
     
    orientation:  
    Select between desktop front, desktop rear, 
    ceiling front and ceiling rear mode 
     
    OSD:  
    Select the placement of the On Screen Display
     
    language:  
    Select between languages 
     
    source info:  
    Displays the source format
     
     
      
    						
    							3D Perception        COMPACTVIEW CLAN 
    Revision 3          User Manual 
     
     
     22
     
     
    15.5 Utilities Sub-menu 
    OSD timeout:  
    Defines how long OSD is displayed after last 
    action 
     
    OSD background:  
    Select the background mode 
     
    reset:  
    Resets the projector to the factory default 
    settings 
     
    service menu:  
    For service personnel only 
     
    lamp reset:  
    Reset the lamp after a lamp change 
     
    OSD:  
    Turn On/Off the On Screen Display during 
    source scan 
     
    software version  
    Displays the current software version 
     
    lamp on time:  
    Displays the lamp on time in hours and 
    minutes 
     
      
    						
    							3D Perception        COMPACTVIEW CLAN 
    Revision 3          User Manual 
     
     
     23
     
     
    16. MAINTENANCE 
    The projector may from time to time require cleaning. Never open the projector, as this will void 
    any warranties. Refer all service and repair work to qualified personnel. 
     
    Only the exterior of the projector may be cleaned. Use a damp cloth. Make sure no liquids enter 
    the inside of the projector 
     
     
     
     
     
     
     
    Vacuum-clean all the air vents regularly to 
    maintain sufficient air flow. 
     
     
     
     
     
     
    The projection lens is sensitive to 
    scratches. Use lens-cleaning tissue, 
    available at all photographic shops when 
    cleaning the projection lens. Use lens cap 
    when not in use. 
      
    						
    							3D Perception        COMPACTVIEW CLAN 
    Revision 3          User Manual 
     
     
     24
     
     
    17. LAMP REPLACEMENT 
    The STATUS lamp on the keypad will turn red when the lamp life expires. In addition, a 
    message will appear on the screen; “LAMP LIFE TIME HAS EXPIRED! Please change lamp.”  
     
    17.1 Remove old lamp 
    Change the lamp when its lifetime expires. Always replace the lamp with the same type and 
    rating. 
     
     
    Always disconnect the power cord and wait 
    until the projector has cooled down (60 
    minutes) before opening the lamp cover. 
     
    Release the screw (A).  
     
    Remove the lamp cover (B). 
     
     
     
     
     
     
     
    Release the screws on the lamp house (C). 
     
     
    Turn the lamp knob (D) counter clockwise to 
    the unlocked position. 
     
     
     
     
     
     
     
    Pull the handle (E). 
     
    Remove the lamp house (F). 
      
    						
    							3D Perception        COMPACTVIEW CLAN 
    Revision 3          User Manual 
     
     
     25
     
     
    17.2  Insert New Lamp  
     
     
     
     
     
    Replace the lamp house (F)  
     
     
     
     
     
    Tighten the screws (C) 
     
    Fold the handle (E) in place. 
     
    Turn the lamp knob (D) clockwise to the 
    locked position. 
     
     
    Replace the lamp cover (B) and tighten the 
    screw (A). 
     
    In the “utilities” sub menu, reset the lamp 
    timer. 
     
     
      
    						
    All 3D Perception manuals Comments (0)

    Related Manuals for 3D Perception CompactView Sx30 I User Manual