3D Perception CompactView X10 User Manual

5.2 Connecting Projectors in a Chain 
Multiple projectors may be connected together in a ‘daisy chain’ by using the input and outpu\
t 
connectors on each projector. 
 
The first projector is connected to the host PC using a 6-lead cable with RJ-12 connectors on 
both ends.  This cable connects to the PC through the supplied adapter (\
9-pin to RJ-12).  The 
other end plugs into the ‘Control Chain in’ port on the first proj\
ector. 
 
From the first projector, another 6-lead cable connects between the...

6 USING THE COMPACTVIEW X10 PROJECTOR 
 
6.1 Different program modes for the COMPACTVIEW X10 projector 
 
The COMPACTVIEW X10 projector has different modes of operation: 
 
1. Stand-by mode 
2. Normal mode 
3. Quick mode 
4. Menu mode 
5. Blank mode 
 
6.1.1 Stand-by mode 
In stand-by mode the projector is turned off and can be turned on by using defined keys, see 
section 6.3 
6.1.2 Normal mode 
In normal mode a picture will be shown on the screen.  
6.1.3 Quick mode 
Quick mode is used with the...

6.2 COMPACTVIEW X10 Remote Control 
 
The COMPACTVIEW X10 remote control provides access to the Main Menu, which in turn 
facilitates control of the various image adjustments and utility functions of the COMPACTVIEW 
X10 projector 
 
Pointing it towards the projection screen operates the remote control. An infrared beam 
bounces from the screen to an infrared receiver on the COMPACTVIEW X10 projector. 
 
NOTE! 
Make sure nothing is blocking the IR receiver in front of projector located beside the 
lens,...

 
 
Figure 7: The remote mouse  
Key underneath the control 
Enter. 
 
Small grey key 
Interrupt/break an action (right mouse key) 
 
Menu 
The menu key gives access to the 
COMPACTVIEW X10 menu control functions. 
To move within the various menu functions, 
position the arrow cursor by pressing the 
sensitive mouse pad and click with the left 
mouse button which is located underneath 
the remote control. If you are in menu mode 
and press the menu key you will return to 
normal mode 
 
Zap 
The two zap...

6.3 Using the touch panel on the COMPACTVIEW X10 projector 
 
The touch panel gives you direct access to the most important functions \
of the COMPACTVIEW 
X10 projector. It is very handy to use when the remote control has low batt\
eries, or you simply 
have forgotten to bring it with you. Remember, these controls are also available from the 
software. The key functions are as follows: 
 
Source 
The COMPACTVIEW X10 projector has direct keys for input 
selection, PC being the norm. 
 
 
Brightness  
The...

6.4 Adjusting the height and angle of the COMPACTVIEW 10 
projector 
 
You can adjust the height and angle of the COMPACTVIEW X10 projector by adjusting the four 
small feet underneath the product. 
 
NOTE! 
The COMPACTVIEW X10 projector should never be left with an angle of more than 15 
degrees over a longer period of time. This will shorten the lifetime of the lamp. 
FOCUS 
6.5 Adjusting Focus/Zoom on the COMPACTVIEW X10 projector 
 
 
 
To adjust focus, turn the outer part of 
the lens (1). 
 
To...

7 USING THE MENUS 
The following menus are accessed through the IR remote control: 
 
1. Main menu 
2. Set-up menu 
3. Control panel menu 
7.1 Main menu 
The main menu is divided into two 
parts: 
• Icons 
• Help text 
 
 
 
 
Icons 
The icons illustrate a function and are grouped into groups with similar\
 functionality. Clicking an 
icon activates it. Some icons have a direct function and some will activ\
ate a second level menu. 
 
Help text 
By moving the cursor over the icons the text area will give...

Set-up menu 
In this menu you set up the projector with settings that will not be 
changed often, e.g. language, mouse system or picture orientation. 
 
 
Control panel 
In this menu you can make adjustments for picture and sound. 
 
Removing the main menu 
To remove the menu system, press the MENU key on the Interactive Remote \
control. The menu 
will disappear when active for 40 seconds. 
 
7.2 Set-up menu 
In the set-up menu the following sub-menus are available: 
 
• Picture orientation 
• Language...

7.2.2 Language 
This menu allows you to choose between six 
different menu languages:  
 

7.2.5 Zap menu 
The Zap menu is used to assign functions to the zap keys on the remote control. The menu 
consists of two columns of buttons where the left column assigns the functions to the Zap 1 key 
and the right column assigns the functions to the Zap 2 key. 
 
Volume  
Not applicable 
 
Pointer 
Not applicable 
 
Blank 
Activates blank mode by pressing the Zap key. 
First click will activate Blank mode and second 
click will deactivate it. 
 
Mute  
Not applicable 
 
Computer  
Selects Computer as...