Home > 3M > Projector > 3M Digital Media System 810 Opeating Manual

3M Digital Media System 810 Opeating Manual

    Download as PDF Print this page Share this page

    Have a look at the manual 3M Digital Media System 810 Opeating Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 307 3M manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							21 3M
    ™ Digital Media System 800 Series
    © 3M 2007. All Rights Reserved.
    ENGLISH
    Basic Operations
    Picture “More” Display sub menu
    Action Description
    Overscan Adjusts the amount of cropping of the Image boundaries. (On/Off)
    Change overscan from 90 to 100 percentile  (in 1 degree increments)
    Black LevelBlack Pedestal level
    1) 0 IRE Pal, NSTC-JP
    2) 7.5 IRE NSTC 
    Phase This function allows the user to the adjust the clock phase to reduce image distortion. (Only on 
    DVI-A and VGA)
    Frequency Adjusts the horizontal width of the image.
    HQV Turns HQV video processing On or Off
    3D NR
    Adjusts the amount of Temporal Noise reduction in the system
    CODEC NR Adjusts the amount of Mosquito and MPEG noise reduction in the system
    BLOCK NR Turns MPEG Block noise reduction On or Off
    Reset Resets values in this sub-menu only
    Table 2: Advanced sub menu function description
    ENGLISH 
    						
    							22
    3M™ Digital Media System 800 Series
    © 3M 2007. All Rights Reserved.
    ENGLISH
    Basic Operations
    Input Display sub menu
    Action Description
    Main
    InputAllows the user to select which Input is to be displayed on the main channel:
    1) Component
    2) DVI and VGA
    3) Computer
    4) S-Video
    5) Composite
    Audio
    InputAllows the user to select which Audio Input is to be processed:
    1) RCA
    2) Stereo Mini 1
    3) Stereo Mini 2
    Table 3: Input sub menu function description
    ENGLISH 
    						
    							23 3M
    ™ Digital Media System 800 Series
    © 3M 2007. All Rights Reserved.
    ENGLISH
    Basic Operations
    PIP Display sub menu
    Action Description
    PIP (Picture in 
    Picture)Allows the user to turn the PIP function On or Off.
    PIP Input Allows the user to select which Input is to be displayed on the main channel:
    9) Component 12) S-Video
    10) DVI and VGA 13) Composite
    11) Computer
    PIP Mode Allows the user to choose which PIP mode to display:
    1) PIP (Picture-In-Picture)   2) PAP (Picture-and-Picture)   3) POP (Picture-On-Picture)
    PIP Size Allows the user to choose the size of the PIP window:
    1) Small    2) Medium    3) Large
    PIP Position Adjusts the vertical and horizontal position of the projected PIP image.
    Only VGA, DVI-D and DVI-A is Active (Only active when input is DVI or VGA).
    PIP Location Allows the user to choose the position of the PIP window:
    1) Top left   2) Top right   3) Bottom left, Bottom right
    PIP Brightness Adjusts the brightness of PIP image. The higher the setting, the brighter the image. The 
    lower the setting, the darker the image. 
    PIP Contrast Adjusts the degree of difference between the dark and light in the PIP. The higher the value, 
    the greater the contrast.
    PIP Hue Adjusts the balance of red-to-green necessary for realistic representation of video signals.
    PIP Color Adjusts the intensity of the Color in the image.
    PIP Position Adjusts the vertical and horizontal position of the projected image.
    Reset Reset values in this sub-menu only.
    Table 4: PIP sub menu function description
    ENGLISH 
    						
    							24
    3M™ Digital Media System 800 Series
    © 3M 2007. All Rights Reserved.
    ENGLISH
    Basic Operations
    Speaker Display sub menu
    Cobra Description
    Volume Allows User to adjust volume from 0 to 50.  At 0 the sound is muted automatically.  
    Bass Allows User to adjust bass from 0 to 10.  
    Treble Allows User to adjust treble from 0 to 10.  
    Mute For the User to toggle the sound On and Off.
    Audio Mode Allows User to change the Audio Mode
    Audio Delay Adjusts the amount of time delayed in audio.
    Reset Adjust the amount of audio delay ± 100ms from the system's default delay.
    Table 5: Speaker Display sub menu description 
    						
    							25 3M
    ™ Digital Media System 800 Series
    © 3M 2007. All Rights Reserved.
    ENGLISH
    Basic Operations
    Setup Display sub menu
    Action Description
    Language Allows the user to select the Menu language:
    1) English 6) Portugese
    2) French 7) Japanese
    3) Spanish 8) Mandarin Traditional
    4) Deutsch 9) Mandarin Simplified
    5) Italiano
    Auto-Shutoff Powers down unit. (No active signals are present)
    1) 5 mins 5)   30 mins
    2) 10 mins 6) 45 mins
    3) 15 mins 7) 60 mins
    4) 20 mins
    H-Keystone Horizontal Keystone adjustment (±30)
    V-Keystone Vertical Keystone adjustment ( ±20)
    Reset Lamp hrs Resets the Lamp hours status indicator in the Status window.
    Lamp Mode 1) Normal   2) Eco
    Fan Mode 3) Normal   4) High
    Projection Mode The projector can be installed on a ceiling or behind a screen
    1) Front Projection
    2) Rear Projection 
    Auto-Switch
    InputSets whether the projector searches automatically for input signals. If the source scan is 
    on, the projector will scan for input signals until it acquires a signal. If the function is not 
    activated, the projector selects the last used input signal.
    - Change Function to Cycle through the Signals  (On/Off)
    Factory Reset Resets all Menu items to Factory default settings.
    Reset Resets values in this sub-menu only.
    Table 6: Setup sub menu function description 
    						
    							26
    3M™ Digital Media System 800 Series
    © 3M 2007. All Rights Reserved.
    ENGLISH
    Basic Operations
    Status Display sub menu 
    						
    							27 3M
    ™ Digital Media System 800 Series
    © 3M 2007. All Rights Reserved.
    ENGLISH
    Troubleshooting
    Troubleshooting
    Common Problems and Solutions
    Symptom Cause Solution
    Power cannot be turned on. The power cord is disconnected.  Insert the power cord into an AC 
    socket.
    TheMaster Power Switch is not 
    turned on.Turn on the Master Power 
    Switch.
    No picture or sound. The desired input source is not 
    selected.Press the remote control Input 
    button to select a desired input 
    source.
    The cables from the input source 
    are not connected.Connect the cable to correct input 
    source.
    The input source is not turned on 
    or not displaying an image. (e.g. If 
    a notebook computer, the external 
    monitor port is not turned on).Turn on input source.
    The lamp will not ignite or has 
    turned off.The internal temperature is too 
    high.Clean the cooling fan screen. 
    The lamp has reached maximum 
    life or has prematurely failed.Replace lamp.
    Sound is heard with no picture. The VGA/Video cables are not 
    connected.Connect the cables to the correct 
    input source.
    The VGA/Video/Audio cables are 
    connected to the wrong input.
    Picture is displayed with no sound The audio cables are connected to 
    the wrong input.
    Check the audio/video 
    configuration.Connect the cables to the correct 
    input source.
    Ensure proper configuration 
    through the menu.
    The volume is set to Minimum. Turn up Volume.
    TheMute is on. Turn off Mute.
    Picture is dark or dim. The brightness setting is too low. Adjust the brightness
    The lamp needs to be replaced. Replace lamp.
    Desired input source cannot be 
    detected.The input source is not active. 
    A signal must be present for the 
    input to be selected.Connect an active input source to 
    unit.
    The input device (e.g. computer,
    DVD player, etc.) is not turned on.Turn on input source. 
    						
    							28
    3M™ Digital Media System 800 Series
    © 3M 2007. All Rights Reserved.
    ENGLISH
    Troubleshooting
    Common Problems and Solutions
    Symptom Cause Solution
    The remote control does not work. The remote control is not facing 
    the remote control sensor.Face the remote control toward 
    the remote control sensor.
    The remote control is too far from 
    the sensor.Operate the remote control within 
    5 meters.
    An obstruction is between the 
    remote control and the sensor.Remove obstacle.
    The remote control’s batteries are 
    exhausted or inserted wrong.Correctly insert batteries.
    Onscreen Messages
    Message Meaning
    No input is detected. Projector is not receiving a signal from an external 
    source. Check the cable connections and verify 
    power is on and external source is working.
    Please change the lamp. The lamp has 1400–1499 hours on it and needs to 
    be changed.
    There are (x) hours of lamp life remaining.
    The unit will shut off in 40 minutes.The lamp has 1500–1579 hours on it and needs to 
    be changed.
    There are (x) hours of lamp life remaining. 
    The unit will shut off in 5 minutes.When the lamp has 1580 hours or more on it, the 
    message will flash, and the power will turn off after 5 
    minutes. 
    						
    							29 3M
    ™ Digital Media System 800 Series
    © 3M 2007. All Rights Reserved.
    ENGLISH
    Maintenance
    Maintenance
    Replacing Projection Lamp
    1
    11
    10
    6 121
    2
    3
    4
    5 7 8 9
    23
    456
    89
    101112
    www.lamprecycle.org
    1-800-328-1371
    Hg
    7 
    						
    							30
    3M™ Digital Media System 800 Series
    © 3M 2007. All Rights Reserved.
    ENGLISH
    Maintenance
    Reset Lamp Hours
    Menu 
    						
    All 3M manuals Comments (0)

    Related Manuals for 3M Digital Media System 810 Opeating Manual