3M Digital Projector Px5 Instructions Manual

E-40
Image
•Perform this operation while projecting the picture for which the adjustment/setting will be made.
•Select the menu name “Image”.
See “Menu Operation Method” on Page E-33 for information about performing menu operations. The item name display will
differ depending on the input signal. See “List of Item Names Offering Input Selection and Adjustments/Settings” on Page E-38.
Picture Adj. / Fine Picture / H Position / V Position
Usually, automatic adjustment is performed at the time of signal...

E-41
Fine Picture
Adjust this when the picture shows a lack of color fidelity or flickering.
Select the “Fine Picture” item name and adjust with the SELECT () but-
tons so that the lack of color fidelity or the flickering disappears.
Image
H Position
Adjust this when the picture is shifted to the left or right.
Select the “H Position” item name and adjust with the SELECT () buttons.
V Position
Adjust this when the picture is shifted up or down.
Select the “V Position” item name and adjust with the...

E-42
Color
•Do the following operation while displaying the image you want to adjust or set.
•Select the menu name “Color”.
See “Menu Operation Method” on Page E-33 for information about performing menu operations. The item name display will
differ depending on the input signal. See “List of Item Names Offering Input Selection and Adjustments/Settings” on Pages
E-38.
Dual Color Mode
Select the preset color mode.
Select the “Dual Color Mode” item name and select the setting contents with
the SELECT ()...

E-43
Color
Color Temp.
The screen color is affected by the color of the illumination and other
extraneous light.
This function adjusts the white, which is the reference color for video
equipment, and improves the quality of color reproduction. Adjustment
can also be used to enhance skin colors.
Select the item name “Color Temp.” and select the setting contents with the
SELECT () buttons.
Low ............ Produces warm whites (reddish)
Medium ...... Produces warm whites (yellowish)
Normal ..........

E-44
White Balance
Color
This function automatically adjusts the black level and the white level of
the analog RGB input signal to suit the personal computer.
1 Select the item name [White Balance] and press the ENTER button.
The display will change to [Input Black Signal].
2 The screen background color of the connected personal computer
will be set to black.
3. Press the ENTER button. The display will change to [Adjusting Black]
and the black level will be adjusted.
4 The adjustment of the black level...

E-45
View
•Perform this operation while projecting the picture for which the adjustment/setting will be made.
•Select the menu name “View”.
See “Menu Operation Method” on Page E-33 for information about performing menu operations. The item name display will
differ depending on the input signal. See “List of Item Names Offering Input Selection and Adjustments/Settings” on Page E-38.
Filter
This function sets the sharpness when the input signal is adjusted to
the resolution of the projector and enlarged or...

E-46
Vertical Flip / Horizontal Flip
In selecting the method of projecting to the screen, these functions are
set when the projector is in a rear screen installation.
Select the item name “Vertical Flip” or “Horizontal Flip” and select the setting
contents with the SELECT () buttons.
View
“Vertical Flip” Off
“Horizontal Flip” Off“Vertical Flip” Off
“Horizontal Flip” On“Vertical Flip” On
“Horizontal Flip” On“Vertical Flip” On
“Horizontal Flip” Off
Keystone
Keystone distortion will occur when the...

E-47
Setup
•Select menu name “Setup”.
See “Menu Operation Method” on Page E-33 for information about performing menu operations. The item name display will
differ depending on the input signal. See “List of Item Names Offering Input Selection and Adjustments/Settings” on Page E-38.
The Auto Source function automatically detects the input signal when
the power supply is switched on and when the input is switched.
Select the item name “Auto Source” and select the setting contents with the
SELECT ()...

E-48
Setup
Menu Position
This function sets the display position of the menu.
Select item name “Menu Position” and select the setting contents with the
SELECT () buttons.
............. Displays on the left side
............. Displays on the right side
Lamp Mode
Use this if the picture is projected on a small screen and the picture is
too bright or when projecting images in dark rooms.
Select the item name “Lamp Mode” and select the setting contents with the
SELECT () buttons.
Eco ............. The...

E-49
Setup
Input Format
This function is used in setting the input signals of the input connec-
tors.
Normally, this should be set to Auto. When identification is not possible
with Auto, make the setting.
Select the item name “Input Format”, press the ENTER button, and the sub
menu will open.
Select the connector that is to be changed, and select the setting contents
with the SELECT () buttons.
[RGB]
This is the signal setting for the RGB connector.
Auto ............ Automatically identifies the...