3M Digital Projector Wx36i Specifications

							Make your ideas seem very big indeed!  
The WX36i projector offers a perfect balance of size, weight, brightness 
and compatibility. This projector is an excellent choice for a modern 
conference room or classroom and is compatible with wide aspect ratio 
PCs notebooks and video conferencing devices. It offers full connectivity 
including HDMI and is HDTV compatible. The WX36i is virtually a 
maintenance-free, multipurpose data projector offering great performance 
and low cost of ownership.
+ Network Control, Management and Presentation
•	Projector Control Software: Control a projector via the network 
•	Projector Image Software: Create MyImage file and send it to the projector 
•	Projector Management Software: Control up to 500 projectors via the network 
•	Projector Messenger Software: Transmit and display a message on a      projector via the network •	LiveViewer Software: Wireless presentations via the LAN 
•	PJLink™: Reduces installation time when replacing other PJLink projectors
+  USB Wireless presentation capability
+ Drawing Function – save annotation  
 to a memory stick 
+ Closed Caption
+ AMX Device Discovery
+ Crestron RoomView®
Take your Ideas 
to the Wide Screen
3M™ Digital Projector WX36i
Features
Brightness: 3000 lumens*
Projected image size: 30" – 300" diagonal
Resolution: native; true WXGA (1280 x 800)
    maximum; UXGA (1600 x 1200)
Speaker: 8W x 2 (mono)
Size (WxDxH): 12.5" x 3.9" x 11.3" (317 x 98 x 288 mm)
Weight: 8.2 lbs. (3.7kg)
Warranty: 3 years or 2500 hours
Included
+  3M Digital Projector WX36i
+  Power Cords (US, UK, Europe)
+  Computer Cable
+  Lens Cap
+  USB Adapter Cover
+  Remote Control (with AA batteries)
+  Multi-Language Operator and Quickstart Guide Software CD
*maximum
3M DP WX36i:
78-9236-7736-9
For more information, call 800.328.1371 or  
visit 3MMobileProductivity.com.    
						

							3M™ Digital Projector WX36i
14
Compatibility
+ Computer 
 • Computer 1,2  15 pin HD-Sub – Analog Computer Input
 • USB Type B – Mouse Emulation
 • Monitor Out 15 Pin HD-Sub – Analog Computer Output
 • Control 9 Pin D-Sub – RS-232 Control Port
 • Audio in 1, 2 3.5mm Stereo mini jack – PC Audio input
+ Video 
 • USB Type A – PC-less Presentation
 • HDMI – Digital Video and Audio
 • Component 3xRCA (Y, Cb/Pb, Cr/Pr) – Component Video input
 • S-Video 4 Pin Mini-Din – S-Video Input
 • Video RCA – Composite Video Input
 • Audio in 3, 2xRCA (red, white) – Right and Left Channel Input
 • Audio Out 2xRCA (red, white) – Right and Left Channel Output
 • MIC 3.5mm stereo – Microphone Audio Input
+ Wired LAN
 • Standard:  10 BASE-T / 100 BASE-TX
 • Connection:  RJ-45
+ Wireless LAN  (optional wireless adapter is required)
 • IEEE802.11 b/g/n
 
Specifications
Auto Vertical Digital Keystone: +30 degrees 
PC-less Presentation:   Compatible with JPEG, JPG, PNG, BMP, GIF, AVI, MOV
Personalization Option:   MyScreen, MyMemory, MyButton,
MyText, MySource
Imager Set: 0.59", P-Si TFT Panel
Aspect Ratio: native 16:10, 4:3, 16:9, 14:9  
Colors: 16.7 million true colors (24 bit)
Contrast Ratio: 3000:1
Projection Lens: F1.67-1.91 (f=19-23mm)
Vertical Lens Shift: 49:1 Fixed
Zoom/Focus: Manual
Zoom Ratio: 1.2:1
Throw Ratio (distance: width): 1.5:1 - 1.8:1
Optional Lenses: N/A 
Hybrid Filter:  Operates up to 4000 hours
Lamp:   UHB 215W (normal), 140W (eco)
Lamp Warranty: 180 hours or 90 days
Lamp Life*: Up to 5000 hours (normal mode)
Up to 6000 hours (eco mode)* Lamp life may vary due to environment and usage. Lamp brightness decreases over time.
Minimum System Requirements for software
Software Requirements  
Microsoft® Windows® XP Home/Professional Edition
Windows Vista® Home Basic/Premium/Business/Ultimate Enterprise – 
(Service Pack 1 or later) 
Windows® 7 Starter/Home Basic/Home Premium/Professional/
Ultimate/Enterprise 
Hardware Requirements: Minimum RAM: 512MB  
Graphic Card: 16 bit, XGA or higher
Hard Drive Space: 100 MB (Windows) 
CD-ROM Drive  
Web Browser: Internet Explorer 6.0 or higher
Connections
1  USB Type A (x2)
2 LAN
3 Mic In
4 Control Port (RS232)
5 Monitor Out Port
6 USB Type B (Mouse/Display)
7 HDMI
8 Computer In 1
9 Computer In 2
10 Audio Out (L/R)
11 Video Ports (Composite, S-Video)
12 Audio In 3 (L/R)
13 Audio In 1/2
14
1
2
3
6
111213
4
5
789
10   
						

							3M™ Digital Projector WX36i
System Specifications
Video Compatibility: NTSC, NTSC 4.43, PAL, PAL-M,  
PAL-N, SECAM
SDTV/HDTV: 525i (480i), 525p (480p), 625i (576i)/ 750p 
(720p@60Hz), 1125i (1080i@60Hz), 1125p (1080p@60Hz)
Auto Digital Keystone Correction: Vertical ±30 degrees
Mouse Emulation: USB
Speaker: 8W x 2 (mono)
Startup Screen: Customizeable
Noise Level: Normal 37dB; Eco 30dB
Feature Set: Auto off, 4x digital magnification, image blank
Horizontal Scan: 31.5 - 106 kHz
Vertical Scan:   56 - 120 Hz
Power Consumption: Normal 310W; Eco Standby 0.5W
Power Supply: AC 110~120V /220~240V (50/60 Hz)
Regulatory Approvals: UL, cUL, FCC Part 15 Subpart B, Class B, 
EN60950-1, CE
Operating Temperature: 41°- 95°F (5°- 35°C)
Storage Temperature: -4°- 140°F (-20°- 60°C)
Operating and Storage Humidity: 10-85% RH without  
condensation
Altitude:  Sea level to 5249 ft. (1,600m) at normal fan speed
 5249 ft. (1,600m) to 10,000 ft.  (3048m) at high fan speed
Optional Accessories
Lamp replacement kit:
78-6972-0118-0
Keep a replacement lamp on hand to 
keep your presentation moving.
Wireless Adapter:
78-6972-0110-7
Plug Adapter into USB Type A Port and  
connect wirelessly to your network.
Universal ceiling mount:
78-6969-9874-5
Install your projector out of the way 
for a professional look with no clutter. 
Note: These sizes are +10 percent. This is due to variations in the manufacture of the lens. If you are close to one of the endpoints you should verify with your unit that the image is the proper size at the pr\
oper distance. 
  Image Size 16:10   Image Size 4:3  
 Projection Distance  Projection Distance Min. [inch (m)] Max. [inch (m)]  Min. [inch (m)] Max. [inch (m)]
   30"  (0.8)   35" (0.9)   43"  (1.1)    40"  (1.0)   49"  (1.2)
   60"  (1.5)    73" (1.9)   89"  (2.3)     84"  (2.1) 102"  (2.6)   
    80"  (2.0)    99" (2.5) 121"  (3.1)   113"  (2.9) 137"  (3.5) 
 100"  (2.5)  125" (3.2) 152"  (3.9)   142"  (3.6) 172"  (4.4) 
 150"  (3.8)  190" (4.8) 229"  (5.8)   215"  (5.5)  260"  (6.6)  
 200"  (5.1)  254" (6.5) 307"  (7.8)   288"  (7.3)  348"  (8.8)   
  300"  (7.6)  383" (9.7)   463"  (11.8)     434"  (11.0)    524"  (13.3)
Screen SizeDiagonal [inch (m)]
Remotely manage and control the projector using a Crestron RoomView® monitoring and control system or the projector’s built-in Crestron RoomView® website
Important NoticeAll statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended \
application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or eff\
ect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited LiabilityThis product will be free from defects in material and manufacture for a\
 period of 3 years or 2500 hours from the time of purchase. 3M MAKES NO OTHER WARRANTIES or CONDITIONS INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the\
 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product\
, regardless of the legal theory asserted.
3M, and the 3M logo are trademarks of 3M Company. Used under license in Canada. All other trade names referenced are the service marks, trademarks, or registered trademarks of their respective companies.   
						

							4E-MU Systems 
						

							Introduction
0204 USB Owner’s Manual5
INTRODUCTION
Thanks for your purchase of the E-MU 0204 USB Audio Interface. The 0204 
provides 2 analog inputs, 4 analog outputs and brings an unparalleled level of USB 
audio quality to the Mac or PC, with pristine 24-bit/192kHz A/D and D/A  
converters, ultra-low jitter clock, and Class-A, ultra-low noise mic/line/hi-Z 
preamps. The signal-to-noise specs of the E-MU 0204 USB are unmatched by any 
other USB interface on the market! From its plug-and-play functionality and 
hands-on ergonomic design, to professional features like zero-latency direct 
monitoring, the USB will forever change your expectations of USB audio. 
Some of the other key features are detailed below:
• Record and playback support for a multitude of sample rates: 44.1k, 48k, 88.2k, 
96k, 176.4k, 192k (176.4k &192k available on PC version only)
• Zero-latency direct hardware monitoring (disabled at 176.4k and 192k on the 
Macintosh)
• Full 24-bit resolution and stereo-in/stereo-out at all sample rates
NOTE
There are some limitations 
when operating at higher 
sample rates. See page 15
 
for details.
• Independent ground lift switches for both analog inputs help to solve potential 
ground loop problems
• Headphone output can be used as separate stereo output from your software 
with analog volume control
• Studio-grade headphone amplifier
• Anti-pop speaker protection minimizes noise during power on/off
• Ultra-low jitter clock subsystem: 
						

							Package Includes
6E-MU Systems
PACKAGE INCLUDES
• E-MU 0204 USB AudioPod
•USB cable
• 0204 USB installation guide
E-MU Software/Manual CD-ROM (OS X /Windows)
• Windows XP, Windows Vista/x64, Windows 7/x64 drivers 
•Mac OS X drivers
• Owner’s manual and tutorials
Acoustica Mixcraft LE 4 Install CD-ROM (Windows)
• Acoustica Mixcraft LE (multitrack recording application) 
						

							Computer Requirements
0204 USB Owner’s Manual7
COMPUTER REQUIREMENTS
The recommended computer system requirements for the E-MU 0204 USB are 
listed below.
Windows
• Intel® Pentium® or AMD® processor — 1.2 GHz or faster
• Intel, AMD, or 100% compatible motherboard & chipset
• Microsoft® Windows® XP (SP3 or greater), Vista/x64, Windows 7/x64 Drivers
• 1 available (Hi-Speed) USB 2.0 port
•1GB System RAM
• 950 MB of free hard disk space for full installation
• CD-ROM/CD-RW or DVD-ROM drive required for software installation
• XVGA Video (1024 x 768)
OS X
• Apple® Macintosh® Intel-based processor — 1.2 GHz or faster
NOTE: For more information on Intel Mac support see the included ReadMe file, 
and/or www.emu.com
 for latest information. 
• Apple Macintosh OS X, 10.5 or greater
• 1 Available (Hi-Speed) USB 2.0 port
•1GB System RAM
• 500MB of free hard disk space for full installation
• CD-ROM/CD-RW or DVD-ROM drive required for software installation
• XVGA Video (1024 X 768) 
						

							Software Installation
8E-MU Systems
SOFTWARE INSTALLATION
Windows XP, Windows Vista or Windows 7
Follow these instructions to install the 0204 USB software on a Windows 
computer.
1. First connect the 0204 USB to your computer using the supplied USB cable, 
and turn it on. 
2. If Windows prompts you with an Add New Hardware Wizard, click Cancel.
3. Insert the E-MU software Installation CD into your CD-ROM drive. If 
Windows AutoPlay mode is enabled for your CD-ROM drive, the CD starts 
running automatically. If not, from your Windows desktop, click Start->Run 
and type d:\setup.exe (replace d:\ with the drive letter of your CD-ROM 
drive). You can also simply open the CD and double-click Setup.exe.
4. The installation splash screen appears. Follow the instructions on the screen to 
complete the installation.
5. Choose “Continue Anyway” when you encounter the “Windows Logo 
Testing” warning screen. See the note below.
6. When prompted, restart your computer.
7. Be sure to register your 0204 USB so we can advise you of future software 
updates and special offers. You can register online at: www.emu.com/register
8. Your 0204 USB is now ready to use.
9. Insert the Acoustica Mixcraft LE 4 Install CD-ROM into your CD-ROM drive.
10. The installation splash screen appears. Follow the instructions on the screen to 
complete the installation.
Note About Windows Logo Testing
When you install the 0204 USB drivers, you will see a dialog box informing you 
either that the driver has not been certified by Windows Hardware Quality Labs 
(WHQL), or that the driver is signed by Creative Labs, Inc., and you will be asked if 
you would like to continue with the installation.
The 0204 USB audio drivers are not certified by WHQL because the product does 
not support some of the features that the Microsoft Windows Logo Program 
requires, most notably Universal Audio Architecture (UAA) and Digital Rights 
Management (DRM).
Despite this, the 0204 USB audio drivers have been rigorously tested using the 
same test procedures that a WHQL qualified driver requires, and it passes in all of 
the other important categories, including those that measure the relative stability 
of the driver. So, it is perfectly safe to install these drivers on your computer.
Uninstalling all Audio Drivers and Applications 
At times you may need to uninstall or reinstall the 0204 USB application and 
device drivers to correct problems, change configurations, or upgrade outdated 
drivers or applications. Before you begin, close the E-MU USB 2.0 Audio control 
application. Applications running during the uninstallation will not be removed.
1. Click Start -> Control Panel.
2. Double-click the Add/Remove Programs icon.
3. Click the Install/Uninstall tab (or Change or Remove Programs button).
4. Select the E-MU 0204 USB entry and then click the Change/Remove button.
5. In the InstallShield Wizard dialog box, select the Remove ALL option. 
						

							Software Installation
0204 USB Owner’s Manual9
6. Click the Ye s button.
7. Restart your computer when prompted.
You may now re-install existing or updated E-MU device drivers or applications.
Macintosh OS X
Follow these instructions to install the 0204 USB drivers and software on a 
Macintosh OS X computer. First, connect the 0204 USB to your computer as shown 
on page 12
.
Install the 0204 USB Software
1. Insert the E-MU Software/Manual CD-ROM into your CD-ROM drive.
2. Double-click on the E-MU icon on the desktop.
3. Double-click on the Install icon to start the installation.
4. The installation Welcome screen appears. Follow the instructions on the 
screen.
5. When the Authenticate dialog box appears, enter the administrator password 
you chose when you installed OS X.
6. Continue to follow the instructions on the screen to continue the installation. 
You will be given the option to install:
•Easy Install: Installs the following applications and drivers.
E-MU 0204 USB: USB Drivers and Control Application
•Custom Install: allows you to choose which components are installed.
7.Easy Install is recommended. The software will be quickly installed. When 
prompted, restart your computer.
8. Be sure to register your 0204 USB so we can advise you of future software 
updates and special offers. You can register online at: www.emu.com/register
Set-up the 0204 USB as your Default Audio Device
9. Click Go -> Utilities from the menu bar.
10. Double-click Audio MIDI Setup, then click the Audio Devices button if it’s 
not already selected. The window shown on the following page appears.
11. Select the 0204 USB for the following: Default Input, Default Output, System 
Output, Properties For.
12. Play a song on iTunes to verify that the 0204 USB is the default device for 
audio playback.
13. Quit iTunes. 
						

							Software Installation
10E-MU Systems
Setup the MIDI Devices
NOTE: If you already have 
a MIDI Interface connected, 
you can skip steps 14-19.If you plan to use a MIDI keyboard, now would be a good time to set up your MIDI 
devices. Connecting a MIDI keyboard will allow you to use the virtual instruments 
provided in the software bundle and get the most out of your purchase. You’ll also 
need a MIDI interface such as the E-MU Xmidi 2x2 or Xmidi 1x1.
14. Click the MIDI Devices button. The window shown below appears.
15. Click the Add Device button. A new external 
device icon like the one shown at right appears. 
16. Double-click on the new external device if you 
want to set the MIDI Keyboard Properties. You 
have the option to name and change the icon 
for the device. Click Apply, then click the Close 
button  to close the Properties window.