3M Projector SPR1000 User Manual

3M™ Streaming Projector SPR1000
© 2012 3M. All Rights Reserved.
 21
English3 Select the outlet adapter that will plug into your wall outlet and align to the power 
adapter.
4 Slide the outlet adapter down until it clicks into place. 

3M™ Streaming Projector SPR1000
 22 © 2012 3M. All Rights Reserved.
English
Charging the Battery
The rechargeable battery in the 3M Streaming Projector SPR1000 gives you up to two 
hours of battery life while in ECO lamp mode. When the battery needs to be charged, 
the status indicator LED starts flashing red. The battery should be fully charged before 
using the projector for the first time. 
Charge the battery:
1 Turn the projector power off. 
2 Connect the power adapter to the projector’s DC input. 
3...

3M™ Streaming Projector SPR1000
© 2012 3M. All Rights Reserved.
 23
EnglishBattery Maintenance Tips:
•	 Charge and discharge the battery by turning on the projector at least once a 
month. 
•	 When storing the projector for more than a month, store it at 50% charge.
•	 The battery is at 50% charge when half of the battery icon is white.
•	 Do not store the projector when it is fully discharged. It will lose the ability to 
charge.
Turning the Projector on and off
When you first pull the projector out of...

3M™ Streaming Projector SPR1000
 24 © 2012 3M. All Rights Reserved.
English
Turning the Lamp On and Off: You can turn the projector's lamp off without turning 
the projector off by pressing the lamp button on the remote control. The projector lamp 
will turn off immediately while the cooling fans continue to run. 
While the projector's lamp is off, the status indicator remains green. This tells you that 
the lamp is off but the projector is still on. Press Lamp On/Off button on the remote 
again...

3M™ Streaming Projector SPR1000
© 2012 3M. All Rights Reserved.
 25
EnglishSetting up the Projector
The projector is quick and easy to set up. You can project the image onto most flat 
surfaces. This section covers positioning the projector, focusing the image, and 
adjusting the brightness and contrast settings. 
Choosing a surface 
The best surface for the image is a flat, white surface. In most cases, lightly textured 
walls do not affect the image quality. Alternatively, a color wall will change the...

3M™ Streaming Projector SPR1000
 26 © 2012 3M. All Rights Reserved.
English
 Attaching the Projector to Tripod (Optional Accessory)
On the bottom of the projector, you will find a tripod socket (1/4"-20) that fits most 
standard camera tripods, including the optional 3M tripod (78-6972-0073-7). 

3M™ Streaming Projector SPR1000
© 2012 3M. All Rights Reserved.
 27
EnglishDistance versus Image Size
The 3M Streaming Projector can project an image from 9 inches (22.1 cm) to 105 
inches (265.7 cm) wide. As you increase the size of the projected image, you will 
need to decrease (darken) the ambient room lighting. Refer to the chart for associated 
dimensions.
Image Size 
Diagonal  
Width  
Height 
Distance
10 in (25.4 cm) 8 3/4 in (22.1 cm) 4 7/8 in (12.4 cm)16 5/8 in (42.2 cm)
20 in (50.8 cm) 17 3/8...

3M™ Streaming Projector SPR1000
 28 © 2012 3M. All Rights Reserved.
English
Adjusting the Focus
After you find a place for the projector, rotate the focus wheel to sharpen the image.
Focus
Adjusting the Brightness and Contrast Settings
You can use the projector brightness and contrast settings to adjust the image based 
on the lighting conditions.
Adjusting the Brightness
Adjust the brightness setting until details in the dark levels of the image appear. If you 
are unable to see the detail, try reducing...

3M™ Streaming Projector SPR1000
© 2012 3M. All Rights Reserved.
 29
EnglishUsing the Projector Keypad:  Press the menu button; press the Info button; press the 
volume down to decrease the brightness and volume up to increase the brightness. 
You can exit the menu by pressing the menu button twice.
Adjusting Contrast
Adjust the contrast setting until details in the bright level of the image appear.
Using the Remote:  Press the menu button at the top-right of the remote control; press 
the down arrow;...

3M™ Streaming Projector SPR1000
 30 © 2012 3M. All Rights Reserved.
English
Volume Up/Down
The volume buttons on the projector and the remote control adjust the sound from 
the speakers or the audio output. Additionally, MHL enabled devices plugged into the 
projector can adjust the projector volume level using the device's remote. 
Display Volume Level: Press the volume up or down button to display the volume 
slider.
Increase or Decrease Volume: Press the volume up button to increase the audio...